Connect with us

Tools

Service VW/Audi Coolant Pumps with Baum’s Specialty Tools

The tools are to be used to correctly torque the bolt for the intermediate shaft pulley on the coolant pump drive.

Advertisement

Advertisement
Click Here to Read More
Advertisement

 

T10360 – Used to correctly torque the bolt for the intermediate shaft pulley on the coolant pump drive.

Baum Tools offers its VW and Audi 2.0T and 1.8T Coolant Pump Intermediate Shaft Bolt Servicing Tool (T10360).

ST730/5 Stahlwille Service-manoskop Torque Wrench with a 6-50Nm torque range. Accepts 9x12mm inserts.

Servicing the coolant pump on modern VW and Audi 4-cylinder turbo engines is not only a time-consuming procedure, but you also have to make sure you have the correct tools to do the job.

The job calls for a special offset torque wrench ring adapter (T10360) and a torque wrench (ST730/5) that fits the ring adapter. The bolt on the intermediate shaft drive sprocket is left-hand thread and has to be torqued correctly.

Advertisement

 Or if you prefer to use your own torque wrench, the Baum Tools offers its BT10360.

BT10360

 

 

Links:

Baum Tools

 

Advertisement
Click to comment

Loading Post...

Loading Post...

Loading Post...

Advertisement

POPULAR POSTS

Mac Tools Introduces Family of Diagnostic Scan Tools

Products

SK Previews New Ratcheting Wrench for Spring 2015

Tools

Matco maxME Scan Tool With One-Click Updates

Tool Tip: Code P0411 – Secondary Air Injection System Incorrect Air Flow Detected

Connect