Snap-on's Shop Cart is Designed for Mobile Organization so Tools are Easier to Move and Locate

Snap-on’s Shop Cart is Designed for Mobile Organization so Tools are Easier to Move and Locate

Go with the flow and let your tools go along with you. Space and mobility are within arms reach now that the new Convertible Shop Cart (KRSC40) from Snap-on Tools Company has rolled onto the scene. The shop cart offers cutting-edge styling and interchangeable drawers, all while providing more than 22,000 cubic inches of portable tool storage space.

Go with the flow and let your tools go along with you. Space and mobility are within arms reach now that the new Convertible Shop Cart (KRSC40) from Snap-on Tools Company has rolled onto the scene. The shop cart offers cutting-edge styling and interchangeable drawers, all while providing more than 22,000 cubic inches of portable tool storage space.

The cart, designed for mobile organization so tools are easier to move and locate, offers more customization options than any other cart in the industry. Drawers can be added or removed and shelves can be adjusted and reconfigured to suit the technicians’ needs.

The one-piece, fully welded design checks in at 40 inches wide, 20-1/2 inches deep and 45 inches tall and is the only cart in the industry made with double side walls. The extra-deep top compartment has a compact flip lid and holds two securely walled rows of holders for screwdrivers, pry bars and other hand tools.

In addition, the unit’s bulk storage area is lined with a high-strength polyethylene liner that can take the abuse that comes from being packed with large power tools, cases and parts. A 1/8-inch thick cover mat on the lid provides a non-slip work surface, while soft casters give the cart a smooth ride with less vibration and noise.

For added safety, the sides of the cart feature four Snap-on embossed Santoprene vertical side bumpers to help prevent damage.

Easy to customize, the cart comes with many available options, such as a locking door, two and three drawer add-ons, a folding side shelf, an end cab, a protective nylon cover, an accessory-mounting adaptor panel, 50-foot extension cord and cord wrap, a flat shelf, a literature rack and a can rack.

Like other tool storage solutions from Snap-on, the cart comes with an industry-leading lifetime warranty and is available in seven color packages. The cart is manufactured by Snap-on in North America.

Customers can find out more about the Snap-on Convertible Shop Cart (KRSC40) by contacting their local Snap-on representative, visiting www.snapon.com or by calling toll free 877-SNAPON-2 (877-762-7662).

You May Also Like

Pulling Codes: Multiple Misfire Personalities

A vehicle fails an emission test due to a series of codes, with misfire activity found on cylinders 2, 4, 6, 8 and 3 – and a strange metallic sound can be heard when the rpms are raised. See how Carlton Banks solves this latest Pulling Codes case.

A Story of Codes P0302, 04, 06, 08 & 03
 

This month’s diagnostic journey begins with a 2008 Land Rover Discovery that is taken in to a local testing facility for an emission test and fails due to a series of misfire codes.

Misfire activity is found on cylinders 2, 4, 6, 8 and 3; at first glance this series of codes implies that there may be bank 2 issues, but the cylinder 3 code throws a wrench into that mode of thought.

Using Volumetric Efficiency to Determine the Health of an Engine

Using an OBD II scan tool/dynamometer simulation/calculation program that can graph volumetric efficiency (VE) over rpms, contributor Glen Beanard devised a test sequence using real-world vehicles. This article takes you step by step through his diagnostic process.

Intermittent Engine Misfire Analysis

Even for an experienced diagnostic technician, attempting to diagnose an intermittent misfire condition that occurs only under specific driving conditions can be a frustrating exercise. Contributor Gary Goms breaks it down, and includes tips for using a scan tool and a lab scope.

5 Mistakes Newbie Tire Techs Make

Nothing can turn a new tech into a veteran but time and experience, and often that experience is going to come from making mistakes – sometimes real bad ones – and learning from them (you hope). By addressing these most common mistakes right away with new tire techs, the worst of them can be avoided.

Rivet Bonding Comes Full Blast

Now that rivet bonding is in the mainstream with the Ford F-150, it’s time for shops to look into training and equipment for this repair process.

Other Posts

‘Test Before Touch’ – It’s No Waste of Time

To help reduce the headaches involved in servicing TPMS, it’s important to use the “Test Before Touch” procedures in your shop. Used properly, TBT can form a strong foundation for everything else you do regarding TPMS, reduce complexity and help you educate and keep your customers.

The Right Diagnostic Tools Save You From Extensive Disassembly Time

It can sometimes be difficult to make the correct diagnosis for a hard-to-start complaint. And diagnostic time may be extensive — and expensive. This article shows how certain tools have the ability to automatically analyze waveforms for you.

Know the Specs for Your Social Media Accounts

If you’re doing social media, are you doing it effectively? Are your accounts set up correctly? Are you posting often enough? Mark Claypool answers some questions.

Top 5 Tools: Kenny Younkins, Ken’s Auto Service Center

Kenny Younkins, owner Related Articles – Lisle Low Profile Fuel Line Disconnect – Dent Fix Soft-Shock Mallet DF-SM76 Reduces Damage – New ProMAXX Diesel Fuel Injector Seal Puller/Saver ProKits Ken’s Auto Service Center Akron, OH While Ken first said his favorite tool is his fishing rod, he said in the shop he prefers these five: