This unique tool was designed to aid in the removal of the front lower control arm compliance bushings, both 65 mm and 74 mm sizes, found on many Honda and Acura vehicles.
With time the front compliance bushings wear out and rip causing the vehicle to have a knock, pop or squeak from the front suspension. Our #68100 bushing tool allows the technician, with minimal effort, to remove and reinstall these bushings. The #68100 cuts an hour off the job and the use of a press is not required.
Made from high quality heat-treated steel, this tool works on more than 7 million vehicles since 2000 and comes in a professional Hi-Tech black finish all contained in a blow-molded box.
Features include:
Saves over 1 hour (30 minutes per side);
No press required;
Both removes and installs;
Works on both 65 mm and 74 mm bushings;
Works on many applications – 7 million vehicles; and
Made from strong heat treated materials.
This tool works on:
65 mm bushings for:
Honda:
Civic 2001-2005
CRV 2002-2006
Element 2003-2006
Pilot 2003 & later
Odyssey 2005 & later
Ridgeline 2006 & later
Acura:
MDX 2000-2006
74 mm bushings for:
Honda:
Accord 2003-2007
Acura:
TL 2000-2007
For additional information, visit www.sptool.com.