Steck Manufacturing Company has released the Right Angle SeamBuster (P/N 20016) by adding a 90° angle along with a third sharpened edge to its popular SeamBuster allows the body technician to gain easy access to the hard-to-reach pinch welds. The Right Angled SeamBuster with a 90° angle and three sharpened edges is designed to allow bi-directional hammer use on quarter panels, rockers and any other pinch weld. The sharp end allows for penetration between the panels and the two lower edges allow for side impact to drive the panels apart. It is made from a super-tough alloy steel and has a cushioned handle that absorbs the shock.
Check out the Right Angle SeamBuster on Steck’s website at www.steckmfg.com.