ABS Archives - Page 11 of 11 - TechShop Magazine
Servicing Import ABS Systems

Import anti-lock brake systems (ABS) are pretty much the same as domestic ABS systems. In fact, the same OEM suppliers who make the ABS system components for import vehicle manufacturers also make them for domestic vehicle manufacturers. The differences that do exist are typically limited to calibration, diagnostic codes and procedures, and wiring. The ABS

Selling Services: Selling the Scope to Your Customer

While replacing a blown head gasket and re-torquing the head bolts, you reach into your tool box and grab your 1/2-inch impact and rattle the bolts down. Just kidding! You would reach for your torque wrench and accurately follow the manufacturer recommendations for torque patterns and values. To guarantee a quality repair, an accurate torque

Bleeding ABS Systems

Occasionally, there will be a need to replace an ABS modulator or other hydraulic component, such as a pump/motor or even a master cylinder, on some systems. When this need arises, it will be essential you are prepared for the task. This article provides an overview of some of the techniques, tools and procedures required

Diagnosis of Faulty ABS Systems

ABS diagnosis typically starts with accessing the associated DTCs and then applying the appropriate flowchart. There will be times when this type of approach will not be possible, or the occasions when it doesn’t yield positive results. When this is the case, it is always helpful to have an understanding of how the systems and

ABS Bleeding Service Pointers Help Complete the Job Right the First Time

Honda Honda has a well-deserved reputation for overall vehicle reliability, which extends to the ABS system. For the most part, bleeding the system will present no unusual problems. Caution: A word of warning when working around the accumulator and modulator assembly. The brake fluid is under thousands of pounds of pressure (3,625-5,075 psi). Be sure

The Forgotten Fourth Pedal…Or…The Seldom-Used Stick

On some vehicles it is the forgotten fourth pedal. The emergency or parking brake is a critical component of the brake systems that should not be ignored. Though most motorists seldom use their parking brakes, it is a required safety device and must work properly when called upon to keep a vehicle stationary. The main

Brake Tech Update: Uncovering Brake Fluid Leaks on Acura Integras

The brake fluid level on 1994 Integras may be low in the ABS reservoir, and fluid may appear to be leaking from under the label on the ABS accumulator. The likely cause is that the ABS accumulator internal O-ring is damaged, allowing brake fluid to leak out. Diagnosis: Remove the label from the ABS accumulator.