Diagnosing Your Customers’ Brake Noise Complaints
Squeaking can be the most challenging and is often evident after the brakes have been serviced. The best way to deal with brake squeal is to prevent it in the first place. While we’re all familiar with brake service, it never hurts to review good practices.
Toyota Brake Service Tips
Here are the top Toyota brake tips that can save you from a comeback or lost productivity.
Brake Job On 2006-Current Cadillac DTS
The 2006-current Cadillac DTS is the largest sedan that General Motors offers. The DTS incorporates the K-platform as denoted by the 4th letter in the VIN. It is built on the same line as the Buick Lucerne. The two vehicles share many brake components, but option packaging is different for the Lucerne.
New Raybestos Brand Brake Pads, Rotors and Calipers Released for Late-Model Import and Domestic Applications
Raybestos brand brake parts – a member of the Affinia family of brands – has added brake rotors, calipers and brake pads to the Raybestos brakes catalog for select 2009-2013 models.
Tech Tip: Bent or Binding Mounting Pins May Cause Slider-Style Caliper Problems on Brakes
Carefully inspect all brake mounting surfaces and hardware for corrosion, wear or misalignment.
Brake Job: 2011-Newer Buick Regal
There are two brake packages for the Buick Regal. Base models have a single-piston caliper in the front. High-performance models (GS) use the J64 brake package that uses a twin-piston caliper in the front and a different pad. The ABS/ESC system also has a different calibration.
Inspecting Brake Hydraulic Systems: Worn Components Take Their Toll on Advanced Suspension Technologies
During a service writer’s efforts to sell competitive brake services at the service desk, he or she often focuses on selling “good, better or best” brake friction replacements, while ignoring the added expense of repairing brake hydraulics. Did you know that neglected brake system hydraulics can cause an expensive warranty comeback?
Mazda3i Vehicle Maintenance Checks
For this article, we’ll be looking at a 2006 Mazda3i. We won’t spend much time on performing routine maintenance services, as we should all be familiar with the nuts and bolts of the job. The most important thing to ask yourself is, why are you doing this service? Sure it’s important to get fresh fluids and
New Raybestos Brand Brake Parts Released for Acura and Volvo
Affinia Group has announced that brake pads, calipers and rotors have been added to the Raybestos brakes catalog for 2013 Acura and Volvo models.
Tech Tip: VW/Audi Calipers Don’t Retract When Replacing Rear Brake Pads
Vehicle Applications: 2004 A8 Quattro 4.2 2005-’06 A6 Quattro 4.2 2005-’07 A6 Quattro 3.2 2005 A8 Quattro 4.2 and 6.0 2006 Passat 3.6 2006-’07 Passat 2.0 2009 Q5 3.2 Customer Concern: When replacing the rear brake pads, the technician cannot get the calipers to retract. Tests/Procedures: 1. With a factory-compatible scan tool, read and
Brake Job on 2000-2006 Hyundai Elantra
The initial inspection revealed the front rotors were below specifications and had uneven pad wear on the right front inboard pad. The rear drums were also out of specification and a leaking wheel cylinder had contaminated the brake shoes. Hyundai recommends replacement of the wheel cylinders if any brake fluid is found in the dust boots. Runout measurements of the rotors and hubs revealed little or zero runout.
Performing a Brake Job on a 2002-2009 Chevrolet Trailblazer
The Chevrolet Trailblazer is based on the GMT 360. The brake system on the Trailblazer is not groundbreaking by any means, but there are some intricacies technicians should be aware of on this common platform. The front brakes utilize dual piston calipers with phenolic pistons. The most important thing to remember when replacing the pads on this vehicle is to replace the hardware.