Hunter Engineering Archives - Tech Shop Magazine
VIDEO: Mazda Blind Spot Monitor Calibration

Joe Keene discusses how to calibrate the blind spot monitoring system on a 2020 Mazda 6 Grand Touring.

Lexus and Toyota Camera Calibration (VIDEO)

Joe Keene discusses how to calibrate the camera on a 2021 Lexus UX where the camera was removed and reinstalled.

VIDEO: VW, Audi Lane Departure Warning Camera Calibration

Calibrations can be done accurately on a front-facing camera with the Hunter ADASLink diagnostic scan tool.

Joe Keene demonstrates how such calibrations can be done accurately and efficiently on a front-facing camera with the Hunter ADASLink diagnostic can tool and the DAS 3000 static fixture.
VIDEO: VW/Audi Surround View Camera Calibration

Joe Keene discusses how to calibrate the surround view system on a VW/Audi vehicle.

Joe Keene discusses how to calibrate the surround view system on a VW/Audi vehicle.
Hunter Adds FastBlast Feature to 51H Tire Changer 

The FastBlast system is designed to inflate even the most challenging truck and SUV tires.

FlastBlast™, Hunter Engineering’s topside blast inflation system, is now an option for its popular TCX51H tire changer. This new configuration will be known as 51H Plus.
Video: Nissan Around View ADAS Camera Calibration

Learn how to calibrate the intelligent Around View Monitor system on a Nissan.

Hunter Nissan Around View video ADAS calibration
Video: Collision Blueprinting with Alignment Equipment

Learn how the ADASLink scan tool leads a tech through the pre-scan and use of extenders and ride height targets.

National Veteran’s Council Recognizes Hunter Engineering

The council ensures that valid and complete documentation exists for veteran status, ownership and operational control.

Video: Accessing the FCA/Stellantis Secure Gateway

Learn how this diagnostic scan tool helps serve as the key that opens the secure gateway in FCA/Stellantis vehicles.

Video: FCA/Stellantis Forward-Facing Camera Calibration

For some ADAS calibrations, the challenges aren’t in the calibrations themselves, but in the details of preparation.

ADAS Calibration: FCA/Stellantis Forward Facing Camera Calibration
Hunter’s Bench Lathes Now Feature HunterNet 2

With the new connectivity, shop owners will be able to view before and after-cut results for rotors and drums online.

Hunter Engineering BL Series of bench lathes with tablets now also connects with the HunterNet 2 portal.
ADAS Calibrations: Ford As-Built Manual Programming Procedure

When ADAS components are repaired, there are additional steps that need to be taken for the calibrations to be complete.