Tech Tip: Blown Head Gasket Symptoms, Causes and Fixes

Tech Tip: Blown Head Gasket Symptoms, Causes and Fixes

Early detection can prevent costly and time-consuming repairs. Bar’s Leaks provides some guidance on which product to recommend.

Affordable chemical fixes for blown head gasket repairs are easy when problems are detected early.

 

Since the head gasket has the most critical sealing job in the engine — to seal and protect the cylinders from coolant or engine oil infiltration to ensure maximum compression — a blown head gasket can be crippling. When a head gasket leak is detected early, it often can be repaired chemically before it grows into a $1,500 to $3,000 problem.

How to spot a blown head gasket:

Here’s a short list of customer complaints that are symptoms or signs of a blown head gasket:

  • A strong, sweet smell of heated coolant.
  • Low coolant level in the coolant reservoir, without visible leaks.
  • Bubble formations in cooling system.
  • Reduced power or problems with idling and acceleration.
  • Engine overheating.
  • White exhaust smoke.
  • Engine misfiring.
  • Milky discoloration in oil (check the oil cap).

Options for fixing a blown head gasket:

For many customers, especially those with older vehicles, the cost of a physical head gasket replacement or engine rebuild can be more than the car is worth. That’s why Bar’s Leaks created the chemical head gasket repair category of products, and now offers three easy-to-use permanent head gasket repair solutions.

Here’s some guidance on which product to recommend.

1) Good.

Bar’s Leaks Head Gasket Sealant (#1100) has the lowest purchase price of the three options. It contains a blend of aramid and refractory fibers to provide the strength of a bulletproof vest and the heat resistance of fireproof clothing. As these particles penetrate a crack or the blown head gasket area, they lock together and bond, forming a hard, permanent ceramic-type seal. This product is applied in a multi-step process that includes draining the coolant system. It is not compatible with antifreeze, and must only be added to cooling system after all antifreeze has been removed. It can be used in vehicles that can idle for at least 20 minutes without overheating.

2) Better.

Bar’s Leaks Head Gasket Fix (#1111) contains a combination of antifreeze-compatible sodium silicate sealing liquid and various gasket-sealing particles that penetrate gaps and cracks and harden to permanently stop leaks. The extreme heat inside the combustion chamber (5,000° F) works as a catalyst to permanently harden the material to make it stronger than the original head gasket itself. Installation is as easy as pouring the product into the cooling system and following the idling instructions. No draining of the coolant system is required. This product is effective in vehicles that can idle for at least 20 minutes without overheating.

3) Best.

Bar’s Leaks Professional Carbon Fiber Blown Head Gasket Repair (#HG-1) is the strongest antifreeze-compatible solution on the market, period. It penetrates a leaking, damaged or blown head gasket, drying to form a seal that’s actually stronger than the original head gasket itself. It’s the best formula to also stop all other coolant leaks in plastic, cast iron, copper and aluminum radiators, heater cores, freeze plugs, gaskets, intake manifolds, cylinder heads and engine blocks. The special formulation also contains Xtreme Cool, which stops overheating and reduces water temperature. No draining of the coolant system is required, and installation is easy – just pour into coolant system and follow idling instructions on the bottle. This product can be used if the vehicle can idle for 15 minutes without overheating.

 

For an unbiased product review of Professional Carbon Fiber Blown Head Gasket Repair, check out the customer video at youtu.be/3VkPGZLIB6M. Customers who purchase by Sept. 30, 2018, can receive a $10 rebate. Visit the online Rewards Center at autocarerewards.com for details.

 

Causes of a blown head gasket:

Customers will often ask what could have caused their head gasket to fail. Head gaskets are put under enormous stress during engine operation, and failure may be caused by any of the following factors:

  • Mechanical Forces. The nature of the detonations in an engine creates huge amounts of energy, or pressure, every time the cylinders fire. Over time, these forces stress head gaskets and can eventually lead to cracks and leaks.
  • Heat. An engine creates large amounts of heat under operation. A difference in thermal expansion rates between the engine block and head mean the head gasket in between is subjected to high thermal and mechanical stresses that slowly wear the gasket down.
  • Vibration. Natural vibrations from the engine and those created as the vehicle is driven down the road also fatigue the head gasket over time. Head bolts, which keep the head gasket sandwiched between the block and head, can start to weaken, break or stretch (and possibly warp) to allow increased friction and vibration wear. A poor design that lacks sufficient clamping force from the head bolts can also cause failure.
  • Overheating. Allowing the coolant level to run low can cause damage to a head gasket. When coolant isn’t available to pull engine heat from the block and heads, the extra heat can cause expansion on the head gasket, which often results in a blown head gasket.

 

For more information Bar’s Leaks head gasket or other stop-leak solutions, visit barsleaks.com. You can also follow Bar’s Leaks on Twitter at twitter.com/barsleaks, Facebook at facebook.com/barsleaks and through the blog at barsleaks.com/blog.

Bar’s Products
Phone: 248-634-8278Fax: 248-634-1505

You May Also Like

Mac Tools Screwdriver Set Now Available in Purple

The tool’s soft grip trilobe handle aids comfort and resists most common automotive solvents.

Mac Tools is now offering its 12-piece screwdriver set in foam in purple.

Built for durability and upgraded user experience, the 12-piece screwdriver set is also available in six- and nine-piece sets.

The soft grip trilobe handle aids comfort and the durable, over-molded bi-material grip resists most common automotive solvents.

Matco Tools Offers New Purple Ratchet with Ergonomic Handle

With 88 gear teeth, this ratchet boasts a swing arc just over 4°, enabling swift work in the tightest spaces.

1/2" Fixed Ratchet (CFR158P)
Mac R.B.R.T. Sockets available in SAE and Metric

Grip and turn an 80% rounded bolt with R.B.R.T. sockets.

New Colors for Mac Tools 2-pc. Silicone Tray Sets

Tray sets are now available in three additional hi-visibility colors.

Philips Xperion 6000 UV Pillar Earns Best New Tool Award

Recognized at Import Vehicle Community’s Import Product and Marketing Awards.

Other Posts

How-to Complete Emissions Monitors Faster

This video will focus on how a product like CAT COMPLETE can improve the chances of completing the monitors faster. This video is sponsored by Rislone.

TPMS: Are Retrofits in Your Future?

Installing a retrofit kit can be performed with the tools and equipment you already own and use on a daily basis.

Tire tread
Maximize Your Scan Tool

Are you maximizing your scan tools to their full potential? Don’t let them be just an expensive code reader.

Scan Tool
Upgrade Your Air System: It’s Easier Than You Think

Improving your shop airflow is only a benefit, unless you like to spend more time, work harder and make less money.

air flow tubes