Tech Tip: Cavitation - A Cooling System's Worst Nightmare
Connect with us
Close Sidebar Panel Open Sidebar Panel

Features

Tech Tip: Cavitation – A Cooling System’s Worst Nightmare

One of the main concerns created by cavitation is the erosion of the metal on the outside surface of cylinder liners.

Advertisement

Cavitation is an issue that has plagued the diesel engine for years. One of the main concerns created by cavitation is the erosion of the metal on the outside surface of cylinder liners.

Click Here to Read More
Advertisement

Tiny air bubbles are formed during normal engine operation and implode at an extremely high temperature and pressure and eat into the wall of the cylinder.

This erosion eventually penetrates the cylinder wall, allowing coolant to enter, contaminating the oil or even causing the engine to hydrolock. The liner O-rings are also affected by cavitation as well, and can erode or become brittle and break away.  

Jasper Engines & Transmissions reminds technicians that supplemental coolant additives (SCAs), and their concentrations, are important to help minimize this damage.

These additives help by coating the surfaces that contact coolant with nitrites. SCA additives also provide pH control to help fight corrosion, and soften the water to help stop mineral deposits from forming.
The proper levels must be maintained in your engine, or it will fail prematurely.

Advertisement

You must be sure to check the levels of your additive package two times per year and test your coolant for replacement once each year.

Courtesy of Jasper Engines & Transmissions.

Advertisement
Click to comment
Connect
Tech Shop Magazine