Tech Tip: Coolant Leak Caution On 1995-2003 Nissan 3.0L, 3.5L Engines

Tech Tip: Coolant Leak Caution On 1995-2003 Nissan 3.0L, 3.5L Engines

A severe coolant leak from the water pump's weep holes causes the coolant to destroy the pump's bearing as well as leak into the engine's oiling system. Catastrophic engine failure can result.

CONDITION: A severe coolant leak from the water pump’s weep holes causes the coolant to destroy the pump’s bearing as well as leak into the engine’s oiling system. Catastrophic engine failure can result.

CAUSE: This engine’s water pump is buried beneath the timing cover since it is internally driven off the engine’s timing chain. Since the front of the pump has direct contact with the engine’s oiling system, the weep holes have been rerouted.  Leaking coolant is channeled back through the pump and into the engine block.  Therefore, if the water pump seal fails, the noticeable leaks will occur as coolant exits the left side of the engine block just below the thermostat housing.

CORRECTION: Be aware of the potential leak points and do not ignore the signs of a leak. It also is recommended that the water pump be changed whenever servicing the timing chain and/or internal timing components.

Use replacement water pump AIRTEX P/N AW9309.

Courtesy of ASC Industries.

You May Also Like

TS Toolbox Guide February 2024

Here’s a look at some of the core feature and modern frills to consider when it’s time to move into a new office.

toolbox guide illustartion

The corporate world has offices. You hang pictures on the wall, keep a few trinkets on your desk and a few snacks in one of your desk drawers. It’s your space. As technicians, we have our toolbox. It’s our “office” on wheels. But it’s different. We have no “work from home” option. We can’t take it with us and work at a coffee shop. Our “office space” becomes far more important. This is where we make our living.The size of a toolbox and the features we choose depend on multiple factors, which have changed over the years along with automotive and tool technology. Here’s a look at some of the core features and modern frills to consider when it’s time to move into a new office.

Embracing Cutting-Edge Solutions the Industry has to Offer

Embracing cutting-edge solutions is strategic and imperative for technicians navigating the constantly changing landscape of automotive maintenance and repair.

Nadine Battah
TPMS: Are Retrofits in Your Future?

Installing a retrofit kit can be performed with the tools and equipment you already own and use on a daily basis.

Tire tread
Maximize Your Scan Tool

Are you maximizing your scan tools to their full potential? Don’t let them be just an expensive code reader.

Scan Tool
2024 Is Your Year to Be the Technician You Always Wanted to Be

As we enter 2024, strategic career planning is essential for success in the automotive repair industry.

happy new year 2024

Other Posts

Repairify Announces Executive Leadership Changes

The company has named Craig Edmonds as president of asTech among other executive appointments.

PRT Launches 22 New Products on Complete Strut Assemblies

The new items come to expand the PRT portfolio in North American Market and represents more than 12 Million vehicles in new coverage.

Autel to Bring OEM Repair Data to its Ultra Series Tablets

Autel partners with MOTOR Information Systems to provide an improved experience for users and more streamlined access to OEM repair information using MOTOR’s TruSpeed Repair.

Upgrade Your Air System: It’s Easier Than You Think

Improving your shop airflow is only a benefit, unless you like to spend more time, work harder and make less money.

air flow tubes