Tech Tip: GM PASSLOCK Relearn Procedure
Connect with us
Close Sidebar Panel Open Sidebar Panel

Features

Tech Tip: GM PASSLOCK Relearn Procedure

Vehicle will not start after the original ECM has been replaced. The original ECM has a security code (PASSLOCK) stored in its memory that matches the vehicle’s instrument panel cluster or security module (if so equipped). The replacement ECM can only receive the PASSLOCK code after it is installed in the vehicle and a relearn performed on the ECM.

Advertisement

Click Here to Read More
Advertisement
Models: All OBD-II (1996 and newer) GM vehicles equipped with the PASSLOCK anti-theft system. 
 
Problem: Vehicle will not start after the original ECM has been replaced.

Cause: The original ECM has a security code (PASSLOCK) stored in its memory that matches the vehicle’s instrument panel cluster or security module (if so equipped). The replacement ECM can only receive the PASSLOCK code after it is installed in the vehicle and a relearn performed on the ECM.

Solution: Because the procedure is vehicle specific, it will be necessary to reference the vehicle service manual for the correct procedure. 
 

Advertisement
Click to comment
Connect
Tech Shop Magazine