Tech Tip: J2788 Test Equipment Needed to Diagnose and Recharge Today's A/C Units

Tech Tip: J2788 Test Equipment Needed to Diagnose and Recharge Today’s A/C Units

In order to remove all the refrigerant from later-model vehicles during the recovery process, a J2788-compliant A/C machine is required. This is due to later-model vehicles using less refrigerant, which older A/C machines cannot fully recover, leading to potential problems.

In order to remove all the refrigerant from later-model vehicles during the recovery process, a J2788-compliant A/C machine is required.  This is due to later-model vehicles using less refrigerant, which older A/C machines cannot fully recover, leading to potential problems.

For example, if an older A/C machine leaves behind 30 percent of the refrigerant after a Recovery, Vacuum, Hold and Recharge, and one then performs a full charge, the A/C system  becomes overcharged, which will cause performance issues and cause premature component failure.

Machines such as the Bosch ACS-615 are designed to exceed the J2788 standard, consistently recovering the maxium old refrigerant, preparing the A/C system for recharging.

If a shop already has a J2788-compliant machine, make sure it is ready for hot weather A/C service by changing the vacuum pump oil, keeping a spare filter on hand, and keeping the tires properly inflated. Underinflated tires can cause the refrigerant scale to be out-of-calibration — not an issue with machines which use foam filled tires, such as the Bosch ACS-615.

Other tips include:
• Use a refrigerant identifier and check virgin cans of refrigerant. A mixture of 134a and R22 can damage J2788 machines.
• Check for sealant leaks. Sealants can kill the A/C machine. (a very inexpensive sealant tester is available from Neutronics).
• Use a filtration system to handle vehicles with traces of seal. Keep in mind that you need to open the cleanout drain after every service to measure the amount of oil removed. (AirSept offers an inline filtration system called RecycleGuard. These filters are quickly installed inline and remove sealant, dye and lubrication).

There is also a new standard for leak detectors: J2791, and current equipment is certified to catch leaks as small as a 1/4 ounce. The companies making these detectors are also required to tell you about chemicals that provide a false positive.

In addition, some A/C repair issues cannot be resolved without reprogramming the vehicle’s computer system. On that note, it’s always a good idea to take some refresher courses to get up-to-date with the latest diagnostic techniques for air conditioning weather.

Bosch is a proud supporter of the Automotive Aftermarket Suppliers Association’s Know Your Parts education and awareness campaign. This initiative promotes the importance of quality brand name aftermarket parts backed by full service suppliers, and its impact on delivering reliable products to today’s motorists. For more information visit: http://kyp.aftermarketsuppliers.org.

Source: Bosch Diagnostics Business Unit    
www.boschdiagnostics.com

You May Also Like

Maximize Your Scan Tool

Are you maximizing your scan tools to their full potential? Don’t let them be just an expensive code reader.

Scan Tool

If there’s a truth that extends across all computerized devices, it’s that we likely utilize only a fraction of the things they have the ability to do. Mobile phones are a great example. How many people do you know who only use them for calls, voicemail and text messages? We all know they do so much more.The scan tools we use every day fall into the same category. Are you maximizing yours to their full potential? Don’t let them be just an expensive code reader. That may be easier said than done, because it takes a lot of time to understand both the scan tool and how well it interacts with the vehicles you’re working on, but there are a few factors that can help you dive a little deeper into the functions at your fingertips.

Brake Lathe Basics

Resurfacing drums and rotors is a machining process with its own specific guidelines.

Refrigerant Oil Has to Be Right

Oil type is just as important as oil capacity.

Three bottles of refrigerant oil
Top 5 Tools: Steve Coffell, Auto World, Hazelwood, MO

Steve Coffell, a technician at Auto World in Hazelwood, MO, says his Top 5 Favorite Tools are: Related Articles – Lisle Low Profile Fuel Line Disconnect – Dent Fix Soft-Shock Mallet DF-SM76 Reduces Damage – New ProMAXX Diesel Fuel Injector Seal Puller/Saver ProKits   OTC Genisys Touch – Quick scan, bidirectional control Snap-on VANTAGE Pro

Wheel Bearing Adjustment Tools & Equipment

A wheel bearing that’s out of adjustment can reduce bearing life and can affect more than just the bearing. It’s important to adjust the wheel bearing endplay to the proper specifications. If the bearing set is adjusted too loose or too tight, it can cause the bearing to fail prematurely. There are a few types of assemblies, so using correct procedures and tools will ensure a comeback-free wheel bearing installation.

Other Posts

2024 Is Your Year to Be the Technician You Always Wanted to Be

As we enter 2024, strategic career planning is essential for success in the automotive repair industry.

happy new year 2024
Impact Wrench Technology

Interchangeable anvils are a feature on some new impacts.

Tools in the Eye of the Beholder

We’re here to help you see all the tools, so you can invest wisely.

Multimeter Accuracy: How Important Is It?

Multimeter accuracy is critical for EV diagnostics.

multimeter