Tech Tip: Kia Experiences Hesitation/MIL On, DTC P0123

Tech Tip: Kia Experiences Hesitation/MIL On, DTC P0123

Some 2001-’06 Optima models equipped with the 2.5L or 2.7L (V6) Delta engine and some Sportage models equipped with the 2.7L (V6) Delta engine, are applicable for this bulletin.

figure 1This bulletin provides information relating to an engine hesitation or the illumination of the Malfunction Indicator Lamp (MIL) for P0123 (Throttle Position Sensor/ Switch “A” Circuit High Input).

 

See Figure 1.

 

Some 2001-’06 Optima (MS) models produced between Oct. 7, 2000 and Aug. 31, 2005, equipped with the 2.5L or 2.7L (V6) Delta engine and some Sportage (KM) models produced between Oct. 28, 2004 and May 18, 2007, equipped with the 2.7L (V6) Delta engine are applicable for this bulletin.

 

figure 2

Improper throttle position sensor (TPS) values may cause the engine to hesitate under loads or cause the illumination of the MIL. To correct this condition, the TPS has been improved.

 

Part Number
Previous            New
35170 37100     35170 37100FFF

 

 

Repair Procedure
1. Turn the ignition key to the Off position. Open the hood and remove the engine cover. figure 3Disconnect the VIS (Variable Induction System) connector and the injector connector if equipped.

 

See Figure 2.

 

2. Disconnect the idle speed control actuator (ISCA) connector and remove the two retaining bolts. Remove the ISCA and gasket.

 

See Figure 3.

  figure 4

 

3. Disconnect the throttle position sensor (TPS) connector and remove the two mounting screws.

 

See Figure 4.

 

4. Install the new TPS sensor onto the throttle body and torque the two screws (1.5-2.5 Nm/13.2-21.6 in.-lbs.) reconnect the TPS connector.

 

figure 5

See Figure 5.

 

5. Install a new ISCA gasket and re-install the ISCA actuator. Torque the ISCA bolts (6-8 Nm/52.8-69.6 in.-lbs.) and reconnect the ISCA connector. Reconnect the VIS connector and the injector ­connector it equipped.

 

 

See Figure 6.

 

 

Figure 66. Reinstall the engine cover.

 

 

Courtesy of ALLDATA.

You May Also Like

Impact Wrench Technology

Interchangeable anvils are a feature on some new impacts.

Technology is defined as the application of scientific knowledge for practical purposes, especially in industry. We often picture technology as something that has computers and electronics attached, and often it does. But, in the world of impacts, both in the realm of pneumatic and cordless, technology bears much deeper roots.

Brake Lathe Basics

Resurfacing drums and rotors is a machining process with its own specific guidelines.

Refrigerant Oil Has to Be Right

Oil type is just as important as oil capacity.

Three bottles of refrigerant oil
Top 5 Tools: Steve Coffell, Auto World, Hazelwood, MO

Steve Coffell, a technician at Auto World in Hazelwood, MO, says his Top 5 Favorite Tools are: Related Articles – Mayhew Introduces New 14-Piece Micro Hand Tool Set – New Small Stud Extractor Now Available from Mayhew Tools – Matco Debuts 5-Piece Purple Screwdriver Set   OTC Genisys Touch – Quick scan, bidirectional control Snap-on

Wheel Bearing Adjustment Tools & Equipment

A wheel bearing that’s out of adjustment can reduce bearing life and can affect more than just the bearing. It’s important to adjust the wheel bearing endplay to the proper specifications. If the bearing set is adjusted too loose or too tight, it can cause the bearing to fail prematurely. There are a few types of assemblies, so using correct procedures and tools will ensure a comeback-free wheel bearing installation.

Other Posts

Fuel Pumps and Cranking

Diagnosing the problem comes down to understanding what causes a loss of fuel pressure.

Tools in the Eye of the Beholder

We’re here to help you see all the tools, so you can invest wisely.

Multimeter Accuracy: How Important Is It?

Multimeter accuracy is critical for EV diagnostics.

multimeter
More Than A Scan Tool

Scan tools serve as indispensable diagnostic hubs, offering access to a wealth of resources, from OEM technical bulletins to community-documented repairs.

scan tool