Tech Tip: Mercedes-Benz Low Range Light Flashes, Code P1831

Tech Tip: Mercedes-Benz Low Range Light Flashes, Code P1831

If you receive customer reports in the affected model vehicles of the low-range light flashing rapidly (18 times) after vehicle start with fault code P1831 (positioner motor, position sensor or power supply is faulty) in the transfer case ECU, do not replace the transfer case motor. This is caused by a temporary loss of communication between the transfer case control module and the shift motor position sensor.

If you receive customer reports in the affected model vehicles of the low-range light flashing rapidly (18 times) after vehicle start with fault code P1831 (positioner motor, position sensor or power supply is faulty) in the transfer case ECU, do not replace the transfer case motor. This is caused by a temporary loss of communication between the transfer case control module and the shift motor position sensor. To resolve the problem, read out fault codes and cycle the transfer case shift motor using the following procedure.

Affected Models: 163.154/157/174/175, as of chassis # A346835.

Service Procedure:
1. Read out and erase fault codes.
2. If fault codes other than P1831 are present, diagnose and repair accordingly.
3. If fault code P1831 is present, start the vehicle.
4. Shift the transmission into neutral (N).
5. Push the “low range” switch. Depress the brake pedal.
6. After the shift motor has cycled, push the “low range” switch again. The “low range” light should go out at this time.
7. Confirm proper transfer case shift function by cycling the ignition and repeating steps 2-5.

Warning: While performing the transfer case shift adaptation described above, take all necessary safety measures such as applying the parking brake and holding the service brake firmly. (Failure to do so can result in unintended vehicle movement.)

For additional tech tips, visit www.identifix.com.

Technical service bulletin courtesy of IDENTIFIX.

You May Also Like

Ryder Deploys First BrightDrop Electric Vans into Rental Fleet

The electric vans have been deployed at four strategic Ryder facilities in California, Texas and New York.

Ryder Systems announced the deployment of its first BrightDrop Zevo 600 electric vans at four strategic Ryder facilities in California, Texas and New York.

The introduction of BrightDrop’s electric vans within Ryder’s rental fleet marks an important step in the company’s ongoing efforts to meet the rising demand and adoption of commercial electric vehicles (EVs) in the United States, the company said.

Making a Living with a Scope

Getting past “scope phobia” can help you make a better living and unlock your potential.

oscilloscope
Hyliion, Cummins Approved for Hypertruck ERX Powertrain

The companies worked together to meet California regulations to sell the Hypertruck ERX Electric powertrain in the state.

Hunter Engineering Wins Two 2023 MOTOR Top 20 Contest Awards

Awards are  22nd and 23rd since 1994.

Sensata Introduces Bidirectional Contactors for EV Charging

The new contactors are for high-power applications like energy storage systems, DC fast charging and HD vehicles.

Other Posts

A Rare Lincoln Blackwood Means A Hunt For Rare Parts

Episode 3 of Season 2 of The Road To AAPEX sets Joe Keene off on a search for parts to help restore the Blackwood.

Report: U.S. EV Investments Rapidly Increasing

Electric vehicle and battery manufacturing grew by a reported $92.3 billion over the past 12 months.

ADAS Calibration Tips

Here are 10 tips to follow during ADAS Calibration.

AISIN Spotlights Electrification Tech at Detroit Auto Show

AISIN’s expanded booth will include a mini EV demo car, connected solutions, eAxle and more.