Tech Tip: Save Time and Replacement Cost by Installing an OE-Match Timing Belt

Tech Tip: Save Time and Replacement Cost by Installing an OE-Match Timing Belt

Many domestic and import car makers use timing belts instead of timing chains because they are quiet, inexpensive, durable and can be replaced without violating the oil tightness of the engine. Vehicle manufacturers usually indicate regular replacement intervals in order to avoid catastrophic engine failure.

Many domestic and import car makers use timing belts instead of timing chains because they are quiet, inexpensive, durable and can be replaced without violating the oil tightness of the engine.

Vehicle manufacturers usually indicate regular replacement intervals in order to avoid catastrophic engine failure. These intervals for timing belts can vary from 10,000 miles for a simple belt tension adjustment to well over 100,000 miles for replacement.

Research by Gates Corporation engineers indicates that the average replacement interval is 60,000 miles.

Many timing belt replacement intervals have been increased because belts last longer than they once did, partly due to improved belt tooth design and the use of heat and oil resistant rubber compounds. Belts may look alike, but they are not interchangeable, and installing the wrong belt can result in premature failure and expensive engine damage.

To avoid comebacks when servicing an import car with a timing belt drive, Gates engineers offer two recommendations.

First, always replace the timing belt at the manufacturer’s recommended interval, or at 60,000 miles.

Second, replace the belt with an OE-match product.

You don’t need to pay dealers’ prices or wait for the dealer to deliver, however. Through its jobbers, Gates Corporation has nearly 260 SKUs of OE-match timing belts for import engine applications ranging from Acura to Yugo vehicles. Because Gates is the only manufacturer approved by virtually every major OEM to provide timing belts for new engines, it is able to cover the aftermarket with timing belts that meet or exceed tough OE performance specifications in fit, form and function.

For additional information, visit the Gates Corporation website at www.gates.com/imports.

You May Also Like

Marketing To High-Value Customers

Neglecting vehicles could lead to more costly repairs for customers down the line. This video is sponsored by Continental.

Courtesy of Tire Review

I’m sure you appreciate every customer that does business with your shop, but there’s no secret that some are more high-value than others.

For example, let’s say someone comes into your shop looking to spend the least amount of money possible. Saving money is essential in today’s world, but these customers may not know the value of maintaining their vehicles despite the cost. Neglecting vehicles like this could lead to more costly repairs for customers down the line.

Updated John Bean Website Provides More Information

Redesign makes it easier to locate more in-depth information.

Stertil-Koni Reports Record Lift Orders, Sales in 2022 

Superior engineering, customer support and real-world performance fuel accelerated growth.

Prevent Cold Stress with 3 Steps for Choosing Winter PPE

Protect workers from hypothermia, frostbite, and other dangerous illnesses.

New Digital Lifting Points Guide from ALI

Electronic guide makes it easy to find OEM lifting point information.

Other Posts

Auto Techcelerators Joins Opus IVS

Combination opens new opportunities for innovation and productivity advances in ADAS services processes.

OIL EATER Launches Overnight Stain Remover

Pulls out oil stains in 3 effortless steps: apply, dry & sweep away.

New Master Series HL1000 and PL 500 from NEBO Lights

The HL1000 Headlamp and Task Light provide up to 1,000 lumens of bright light and various hands-free lighting option.

Snap-on Butane Torches Offer Unmatched Versatility

The torches allow maximum flexibility in a compact design.

Snap-on butane torches single-handedly offer techs a reliable and portable 350- to 820-watt heat source for quick jobs in and out of the shop.