Tech Tip: Save Time and Replacement Cost by Installing an OE-Match Timing Belt

Tech Tip: Save Time and Replacement Cost by Installing an OE-Match Timing Belt

Many domestic and import car makers use timing belts instead of timing chains because they are quiet, inexpensive, durable and can be replaced without violating the oil tightness of the engine. Vehicle manufacturers usually indicate regular replacement intervals in order to avoid catastrophic engine failure.

Many domestic and import car makers use timing belts instead of timing chains because they are quiet, inexpensive, durable and can be replaced without violating the oil tightness of the engine.

Vehicle manufacturers usually indicate regular replacement intervals in order to avoid catastrophic engine failure. These intervals for timing belts can vary from 10,000 miles for a simple belt tension adjustment to well over 100,000 miles for replacement.

Research by Gates Corporation engineers indicates that the average replacement interval is 60,000 miles.

Many timing belt replacement intervals have been increased because belts last longer than they once did, partly due to improved belt tooth design and the use of heat and oil resistant rubber compounds. Belts may look alike, but they are not interchangeable, and installing the wrong belt can result in premature failure and expensive engine damage.

To avoid comebacks when servicing an import car with a timing belt drive, Gates engineers offer two recommendations.

First, always replace the timing belt at the manufacturer’s recommended interval, or at 60,000 miles.

Second, replace the belt with an OE-match product.

You don’t need to pay dealers’ prices or wait for the dealer to deliver, however. Through its jobbers, Gates Corporation has nearly 260 SKUs of OE-match timing belts for import engine applications ranging from Acura to Yugo vehicles. Because Gates is the only manufacturer approved by virtually every major OEM to provide timing belts for new engines, it is able to cover the aftermarket with timing belts that meet or exceed tough OE performance specifications in fit, form and function.

For additional information, visit the Gates Corporation website at www.gates.com/imports.

You May Also Like

Mullen Road Tests Solid-State Polymer Battery Pack

The results met or exceeded all requirements targeted for the first drive cycles for energy usage and driving range.

Mullen Automotive began Class 1 EV cargo van road testing with an integrated solid-state polymer battery pack. Vehicle road testing began on Feb. 26 at Mullen’s Commercial Tech Center in Troy, MI.

Mullen’s latest phase of solid-state polymer battery testing began in January with the installation of the battery pack into the Class 1 EV cargo van for testing system compatibility between the vehicle and pack. Recent performance testing has included on-road drive cycles as well as Dyno testing at an EPA-certified lab located in Northville, MI, Mullen said.

TEXA Releases IDC5 CAR 76.5.0 Update

IDC5 CAR 76.5.0 is characterized by over 2600 new possible selections for the major makes on the market worldwide.

TurnOnGreen, Endliss Power Team up to Expand EV Charging

TurnOnGreen said it will leverage EPI’s expertise in administering and executing power purchase agreements with commercial clients.

Autel’s ADAS Bay Max Vehicle Lift

Learn how this lift integrates mechanical repair, four-wheel alignment, and ADAS calibration, prioritizing efficiency and space utilization in your shop.

Switch EV Trainer Provides Tailored EV Tech Training

The Switch EV Trainer includes all of the components of a modern EV drivetrain on a compact, insulated, mobile platform.

Other Posts

Tool Time Podcast: SATA USA

In this all new episode of the Tool Time Podcast, Nadine and Eric sit down with Chris Springer of SATA USA.

Elywhere Launches in North America

Elywhere chargers can be configured to support power in the 1 MW range, providing solutions for electric fleets.

#3 Screwdriver “Tips”

What appears as one of the most basic tools in your box is far from it.

#2 Calipers & Micrometers

Calipers and Micrometers are essential measuring tools when exact precision is required.