Tech Tip: Toyota Rear Brakes Are Pulling in One Direction

Tech Tip: Toyota Rear Brakes Are Pulling in One Direction

If you encounter a 2000 Toyota Camry 3.0L that pulls in one direction when applying the brakes, one of the scenarios covered in this Tech Tip could be the likely cause.

If you encounter a 2000 Toyota Camry 3.0L that pulls in one direction when applying the brakes, one of the following scenarios could be the likely cause.

1. A sticking or seized brake caliper can cause the vehicle to pull in one direction when applying the brakes.

2. Rusty, corroded brake caliper hardware can restrict brake caliper movement.

3. Contaminated, damaged or excessively worn brake pads can cause a loss of friction between the brake pad and brake rotor.

4. A damaged, rusted, heat checked or glazed disc brake rotor can result in a loss of friction between the brake pads and brake rotor.

5. Deteriorated, soft or damaged brake hoses can expand during brake application, reducing brake pressures to the directed component.

Courtesy of IDENTIFIX.

For additional tech tips, visit www.identifix.com.

You May Also Like

Mullen Road Tests Solid-State Polymer Battery Pack

The results met or exceeded all requirements targeted for the first drive cycles for energy usage and driving range.

Mullen Automotive began Class 1 EV cargo van road testing with an integrated solid-state polymer battery pack. Vehicle road testing began on Feb. 26 at Mullen’s Commercial Tech Center in Troy, MI.

Mullen’s latest phase of solid-state polymer battery testing began in January with the installation of the battery pack into the Class 1 EV cargo van for testing system compatibility between the vehicle and pack. Recent performance testing has included on-road drive cycles as well as Dyno testing at an EPA-certified lab located in Northville, MI, Mullen said.

TEXA Releases IDC5 CAR 76.5.0 Update

IDC5 CAR 76.5.0 is characterized by over 2600 new possible selections for the major makes on the market worldwide.

TurnOnGreen, Endliss Power Team up to Expand EV Charging

TurnOnGreen said it will leverage EPI’s expertise in administering and executing power purchase agreements with commercial clients.

Autel’s ADAS Bay Max Vehicle Lift

Learn how this lift integrates mechanical repair, four-wheel alignment, and ADAS calibration, prioritizing efficiency and space utilization in your shop.

Switch EV Trainer Provides Tailored EV Tech Training

The Switch EV Trainer includes all of the components of a modern EV drivetrain on a compact, insulated, mobile platform.

Other Posts

Tool Time Podcast: SATA USA

In this all new episode of the Tool Time Podcast, Nadine and Eric sit down with Chris Springer of SATA USA.

Elywhere Launches in North America

Elywhere chargers can be configured to support power in the 1 MW range, providing solutions for electric fleets.

#3 Screwdriver “Tips”

What appears as one of the most basic tools in your box is far from it.

#2 Calipers & Micrometers

Calipers and Micrometers are essential measuring tools when exact precision is required.