Tech Tip: Volvo Camshaft Housing Cover Removal

Tech Tip: Volvo Camshaft Housing Cover Removal

The following tech tip provides information on tools and procedure that should be used to remove the camshaft housing cover. This method prevents damage to the camshaft housing thrust bearing.

The following tools and method should be used to remove the camshaft housing cover. This method prevents damage to the camshaft housing thrust bearing.

Tools:
• 2-valve engines: 999 5508, 999 5454 (x2);
• 4-valve engines: 999 5453, 999 5454 (x2); and
• 2/4 valve engines: 999 5670 (x1).

Service Procedure:
1. Install tool 999 5453 or 999 5508 to secure the front of the camshafts. See Fig. 1.
2. Install tool 999 5454, with a few millimeters of play, to the camshaft housing cover and remove all screws. See Fig. 1.
3. Disconnect the camshaft cover with pliers 999 5670 at the stop lugs. Start with cylinder 1 and work alternately backward. See Fig. 2.
4. Open and slacken off tool 999 5454 step by step so that parallel movement is ensured when removing the camshaft housing cover.

Technical service bulletin courtesy of Mitchell 1.

For more information on Mitchell 1 products and services, automotive professionals can log onto the company’s website at www.mitchell1.com.

You May Also Like

Tool Time Podcast: Clore Automotive

Jim O’Hara from Clore Automotive joins Nadine Battah and Eric Garbe.

TechShop’s Tool Time Podcast Series highlights tool and equipment trends, combined with an educational focus on technology that brings solutions to shop owners and techs as they address the growing complexity of vehicle repair.

In this episode, Tech Shop Editor Nadine Battah and Babcox Media's ASE Certified Master Technician Eric Garbe sit down with Jim O'Hara from Clore Automotive.

TechShop, ShopOwner Offer $50 For Good Guesses

Guess the Tool for a chance at cold hard cash!

GM, Honda Begin Volume Production of Fuel Cell Systems

GM and Honda will produce fuel cells that will be two-thirds less expensive compared to Honda’s 2019 Clarity fuel cell.

Toyota Bringing Battery EV Production to Kentucky

It will invest $1.3 billion at its flagship Kentucky facility for future electrification efforts, including assembly of an all-new, three-row battery electric SUV for the U.S. market.

Repairify Announces Executive Leadership Changes

The company has named Craig Edmonds as president of asTech among other executive appointments.

Other Posts

New Hyundai/Kia Air Skirt Helps to Maximize EV Range

The Active Air Skirt (AAS) helps improve driving range and stability of EVs, the companies said.

StoreDot Introduces Extreme Fast Charging Concept Vehicle

The company’s I-Beam XFC includes a proprietary “100in5” cell technology, which enables charging 100 miles of range in just five minutes.

TPMS: Are Retrofits in Your Future?

Installing a retrofit kit can be performed with the tools and equipment you already own and use on a daily basis.

Tire tread
Clarios, Altris Partner on Low-Voltage Sodium-Ion Batteries

The companies will develop a Na-ion battery with a potential of up to 60 volts to support automotive applications.