SAE J2534 Vehicle Communication Interface

The Ins and Outs of SAE J2534 Vehicle Communication Interface

For many of us, J2534 is a nebulous term or one that brings fears of “bricked” modules and hours of frustration to perform what should be a simple firmware update on a vehicle’s module.

By Donny Seyfer

For many of us, J2534 is a nebulous term or one that brings fears of “bricked” modules and hours of frustration to perform what should be a simple firmware update on a vehicle’s module.

The ultimate goal of J2534 for 2018 model year and, in some cases, much earlier vehicles is for shops to be able to run OEM and aftermarket scan tool software and programming applications to include vehicle security over a common standardized Vehicle Communication Interface (VCI).

To help relieve your trepidation with J2534, let’s first start at a high level and talk about what it can do. Our industry has lots of gurus on this topic and, in my experience, they assume a high level of understanding on the part of technicians when they talk about the topic.

The name itself is an SAE (Society of Automotive Engineers) number assigned to a project, protocol or standard. In reality, J2534 is all of the above. It has five different iterations intended to perform different functions when applied to an OBDII-equipped vehicle. That is as deep as I am going to go into SAE for this article.

The original intended use for J2534 protocols was to create a standardized way to update software (firmware) on the powertrain control module on OBDII vehicles. The problem back then, and still present in your bays today, is that the vehicle development cycle was already in motion when J2534-1 was moving from infancy to usefulness.
This means that you have some brands that could not support this type of programming well into the early 2000s. There are workarounds for that group of vehicles, but let’s say they are not very user friendly. In those situations, a factory scan tool is pretty much the only solution.

As time passed, J2534 evolved to include additional capabilities and incorporate some ISO (International Standards Organization) protocols and techniques. This effectively brought more Asian and European cars to the table. During this time, discussions about a standard interface for diagnostics were occurring throughout the industry, and J2534 was chosen as the basis for the “universal” VCI.

As it sits in 2018, automakers have agreed through a Memorandum of Understanding (MOU) to make their diagnostic and reprogramming capabilities available over the J2534 platform.

So, is it truly universal? The short answer; not yet. This is a big topic, so I am going to give you a fairly broad answer from my experience working with toolmakers, technicians and automakers at NASTF. Due to the requirements of making a J2534 tool work as a complete diagnostic solution, there has been impressive collaboration between all the parties and, in my opinion, more has been done in the last 18 months than in any other period since SAE began the project.

The reason that we are not fully universal lies in all the variations of hardware and some legacy protocols that exist on vehicles. With that said, the requirement was for 2018 and beyond models to be fully compliant. Some automakers had such a big change to make that they decided to create a completely new tool to meet the criteria — for example, Ford, Hyundai and Kia. Others have been working on J2534 for some time and are backward compatible for many years of vehicles —Toyota, GM, BMW, Jaguar/Land Rover, to name a few.

So, depending on what you are tooling up for, a complete solution may be available for the VCI portion. This leads me to the last issue we have not talked about, and that is the PC. It would be ideal to be able to run one PC and have every OEM vehicle you work on to be set up on it. There are problems with this from both an IT and pragmatic standpoint.

First, the IT issue. Familiar companies, for example Bosch and Snap-on, develop many of these applications. GM and Ford use a nearly identical Dealer VCI in their tools and these are basically J-boxes, but there may be specific software components that are not compatible on the same computer, which can make the software inoperable. You can have a pair of VCIs that put their software in the same location on your computer, but are not the same versions and you run into a problem. This means that, for most shops, you would want to run several laptops with more than one Windows partition on the hard drive to facilitate different scan tool software.

There are pragmatic business reasons to support this. First, you can buy refurb Windows machines out there for under $400 with adequate drive space, memory and an i5 processor. With a little planning, you can spread your software out between machines and reduce the bottleneck that could occur when every tech wants the same machine.

 

Donny is the co-owner of Seyfer Automotive Inc. in Wheat Ridge, CO. Donny is an ASE Master and L1 Advanced Diagnostic Certified Technician, ASE Certified Service Consultant, AMI Accredited Automotive Manager, and the current Automotive Service Association chairman.

Link: Underhood Service

You May Also Like

Fine-Tuning Your Wheel Balancing Process

The first step to a smooth ride and well-balanced tire has nothing to do with the balancer.

Courtesy of ShopOwner

The best tire in the world can’t fix a poor balance procedure and worn-out tooling. We have an opportunity to elevate the level of customer experience in our industry that takes nothing more than a few minutes of time and a commitment to using proper procedures and tools. And guess what? Your customer is more than willing to pay for it. Intrigued? Read on to learn what you can do in your shop to generate higher gross profit and lower comebacks.

Smash the Peppermint Pig

What’s the best tool an auto technician can own? Is it really possible to say?

Drywall Pro’s Invention Becomes a Hit with Auto Painters

We love how inventive people are! Here’s a great story of someone who developed a tool auto repair techs can use too!

Drywall Pro’s Invention Becomes a Hit with Auto Painters
On the Job: Eye Protection

Most employees want to work in a safe manner. So why do these preventable eye injuries keep occurring?

The Latest in Auto Repair Workwear

Here’s a look into the many options available in today’s workwear specifically designed for automotive technicians.

Other Posts

TPMS: Are Retrofits in Your Future?

Installing a retrofit kit can be performed with the tools and equipment you already own and use on a daily basis.

Tire tread
Maximize Your Scan Tool

Are you maximizing your scan tools to their full potential? Don’t let them be just an expensive code reader.

Scan Tool
Upgrade Your Air System: It’s Easier Than You Think

Improving your shop airflow is only a benefit, unless you like to spend more time, work harder and make less money.

air flow tubes
Why ECU Reflashing Needs Certain Power Levels

A reflash power supply is not designed to jumpstart the vehicle.