Three AGM, Gel Cell Battery Myths

Three AGM, Gel Cell Battery Myths

Chances are if the battery is not under the hood, it is an absorbent glass mat (AGM) or gel cell battery. These batteries pack a lot of power for their size and weight, which allows manufacturers to shave off a few pounds from the vehicle. That’s a big ­reason why they are being found more and more on late-model vehicles. Here are three AGM/gel cell myths.

Have you noticed more batteries are moving into the trunks and under the seats of some vehicles? Chances are if the battery is not under the hood, it is an absorbent glass mat (AGM) or gel cell battery. AGM eliminates acid spilling in an accident because it is sealed. They can be installed at odd angles. 
 

These batteries pack a lot of power for their size and weight, which allows manufacturers to shave off a few pounds from the vehicle. That’s a big ­reason why they are being found more and more on late-model vehicles. 
Here are three AGM/gel cell myths:
 
You can use your regular battery charger on AGM or gel cell batteries.
 
False. These batteries like to be charged slow and low. Many AGM/gel cell battery chargers have microprocessors that collect information from the battery and adjust the current and voltage accordingly. Some have different settings for charging flooded, gel and AGM batteries. Overcharging can kill these batteries. Also, alternators are not chargers. Don’t rely on an alternator to do the work of a ­charger. If a battery is discharged to the point that it cannot start the vehicle, use a charger as soon as ­possible to make sure the battery gets fully charged.
AGMs and gel cells can be tested the same way as conventional batteries.
 
False. These types of batteries have lower internal resistance than flooded batteries. Older capacitance battery testers/analyzers may not be able to ­accurately read these batteries. Most new battery analyzers have a special mode for AGM/gel cell ­batteries. Old-school load testers might not provide conclusive results. 

AGM or gel cell battery replacement is the same as flooded battery replacement. 
 
True and False. While the installation of the ­battery may be the same for the two battery styles, some vehicles require an extra step to tell the vehicle that the battery has been replaced. Newer GM vehicles have a Battery Sensor Module on the negative ­battery cable. Ford has the Battery Monitoring System (BMS). Other manufacturers have similar systems. These systems require recalibration with a scan tool if the battery is replaced. If the system is not recalibrated, the alternator might overcharge the new battery and cause the battery to fail soon after replacement.

You May Also Like

Utilizing Fully Automatic A/C Equipment on Today’s Cars

As technology evolves, fully automatic A/C equipment becomes a greater necessity.

A/C knob

As auto technicians, we rely on our tools and equipment to help us perform our jobs efficiently and accurately. Much of the modern equipment designed for automotive service features automatic operation, or, at minimum, some automatic aspects. While this is often beneficial to technician productivity, it’s not always a necessity.

Brake Lathe Basics

Resurfacing drums and rotors is a machining process with its own specific guidelines.

Refrigerant Oil Has to Be Right

Oil type is just as important as oil capacity.

Three bottles of refrigerant oil
Top 5 Tools: Steve Coffell, Auto World, Hazelwood, MO

Steve Coffell, a technician at Auto World in Hazelwood, MO, says his Top 5 Favorite Tools are: Related Articles – New Colors for Mac Tools 2-pc. Silicone Tray Sets – Philips Xperion 6000 UV Pillar Earns Best New Tool Award – Continental Bundles Autodiagnos TPMS Tools, Sensors   OTC Genisys Touch – Quick scan, bidirectional control

Wheel Bearing Adjustment Tools & Equipment

A wheel bearing that’s out of adjustment can reduce bearing life and can affect more than just the bearing. It’s important to adjust the wheel bearing endplay to the proper specifications. If the bearing set is adjusted too loose or too tight, it can cause the bearing to fail prematurely. There are a few types of assemblies, so using correct procedures and tools will ensure a comeback-free wheel bearing installation.

Other Posts

How To Pick The Right Battery For Your Customers’ Needs

Providing your customer with the correct group size and type of replacement battery is more important than ever.

Battery Chargers: Which one do you need?

Modern battery chargers adapt to diverse battery types and needs.

charging a car battery
Your Shops’ Online Presence is Your Strongest Tool

Having a strong online presence is a crucial tool for shops in the industry to thrive in the digital age.

The Human Connection

The human connection beats self-checkout when it comes to understanding and helping in forgetful moments.

Sales associate at auto parts store helping customer