Turn to New Rislone Power Steering Stabilizer to Restore System Performance

Turn to New Rislone Power Steering Stabilizer to Restore System Performance

New Rislone Power Steering Stabilizer with Stop Leak contains a special blend of performance additives, anti-wear agents and viscosity improvers to solve most common power steering problems, including slack, noise and squeals, hard/tight steering and fluid loss.

New Rislone Power Steering Stabilizer with Stop Leak contains a special blend of performance additives, anti-wear agents and viscosity improvers to solve most common power steering problems, including slack, noise and squeals, hard/tight steering and fluid loss.

One 12.5 oz. bottle treats two to three quarts of any type of power steering fluid. It works on all domestic and import cars, trucks, vans, SUVs and heavy-duty vehicles.

“Many older, high-mileage vehicles develop problems with their power steering systems as seals leak, valves stick and the fluid breaks down quickly,” says Clay Parks, vice president of marketing and development. “Rislone Power Steering Stabilizer with Stop Leak helps to prevent and stop these problems while enhancing the useful life of the power steering system. We guarantee it will provide smoother steering with no power steering system leaks.”

Rislone Power Steering Stabilizer restores seal size, flexibility and elasticity lost due to heat, age and high mileage. It also builds a polymeric film around the seal or O-ring, while filling in any grooves that have been worn into the sector shaft. This stops most leaks in the power steering system, including those in the pitman arm and sector shaft seals.

By renewing the O-rings and preventing fluid from bypassing grooves in the shaft, Power Steering Stabilizer also eliminates most cases of “morning sickness,” a condition where the vehicle is hard to steer in the mornings or when cold.

Rack and pinion performance is restored by eliminating hard spots and loose steering caused by worn racks. At the same time, special lubricity additives smooth out rough, hard and tight steering. Power Steering Stabilizer also contains friction modifiers that stop bearing, piston and valve noises inside the power steering pump. Most results are noticeable immediately or within a few days.

Rislone Power Steering Stabilizer with Stop Leak is part of the new Rislone stabilizer line. These products restore vehicle fluids with performance additives and detergents to improve high-mileage vehicle performance. Other products in the line are Rislone Oil Stabilizer with Engine Treatment and Rislone Transmission Stabilizer with Stop Slip.

Rislone Power Steering Stabilizer with Stop Leak (part number 4603) is available in case packs of six.

For more information about Rislone Power Steering Stabilizer or other Rislone products, call (800) 521-7475, e-mail [email protected] or visit their website at www.rislone.com.

You May Also Like

Pulling Codes: Multiple Misfire Personalities

A vehicle fails an emission test due to a series of codes, with misfire activity found on cylinders 2, 4, 6, 8 and 3 – and a strange metallic sound can be heard when the rpms are raised. See how Carlton Banks solves this latest Pulling Codes case.

A Story of Codes P0302, 04, 06, 08 & 03
 

This month’s diagnostic journey begins with a 2008 Land Rover Discovery that is taken in to a local testing facility for an emission test and fails due to a series of misfire codes.

Misfire activity is found on cylinders 2, 4, 6, 8 and 3; at first glance this series of codes implies that there may be bank 2 issues, but the cylinder 3 code throws a wrench into that mode of thought.

Using Volumetric Efficiency to Determine the Health of an Engine

Using an OBD II scan tool/dynamometer simulation/calculation program that can graph volumetric efficiency (VE) over rpms, contributor Glen Beanard devised a test sequence using real-world vehicles. This article takes you step by step through his diagnostic process.

Intermittent Engine Misfire Analysis

Even for an experienced diagnostic technician, attempting to diagnose an intermittent misfire condition that occurs only under specific driving conditions can be a frustrating exercise. Contributor Gary Goms breaks it down, and includes tips for using a scan tool and a lab scope.

5 Mistakes Newbie Tire Techs Make

Nothing can turn a new tech into a veteran but time and experience, and often that experience is going to come from making mistakes – sometimes real bad ones – and learning from them (you hope). By addressing these most common mistakes right away with new tire techs, the worst of them can be avoided.

Rivet Bonding Comes Full Blast

Now that rivet bonding is in the mainstream with the Ford F-150, it’s time for shops to look into training and equipment for this repair process.

Other Posts

‘Test Before Touch’ – It’s No Waste of Time

To help reduce the headaches involved in servicing TPMS, it’s important to use the “Test Before Touch” procedures in your shop. Used properly, TBT can form a strong foundation for everything else you do regarding TPMS, reduce complexity and help you educate and keep your customers.

The Right Diagnostic Tools Save You From Extensive Disassembly Time

It can sometimes be difficult to make the correct diagnosis for a hard-to-start complaint. And diagnostic time may be extensive — and expensive. This article shows how certain tools have the ability to automatically analyze waveforms for you.

Know the Specs for Your Social Media Accounts

If you’re doing social media, are you doing it effectively? Are your accounts set up correctly? Are you posting often enough? Mark Claypool answers some questions.

Top 5 Tools: Kenny Younkins, Ken’s Auto Service Center

Kenny Younkins, owner Related Articles – Mayhew Introduces New 14-Piece Micro Hand Tool Set – New Small Stud Extractor Now Available from Mayhew Tools – Matco Debuts 5-Piece Purple Screwdriver Set Ken’s Auto Service Center Akron, OH While Ken first said his favorite tool is his fishing rod, he said in the shop he prefers