Video: Collision Blueprinting with Alignment Equipment

Video: Collision Blueprinting with Alignment Equipment

Learn how the ADASLink scan tool leads a tech through the pre-scan and use of extenders and ride height targets.

An alignment is usually called for prior to ADAS calibrations, because if the wheels aren’t going straight, then neither are the cameras or radar. This means the system won’t work as intended, which can have serious results. Blueprinting, as Babcox Media’s Joe Keene explains, helps ensure that all collision damage has been properly repaired and the vehicle is ready for alignment and calibration.

Joe demonstrates in detail how the ADASLink scan tool leads the technician through the pre-scan, including use of extenders for a more comprehensive view and ride height targets to make sure the vehicle is level. As systems change and more thorough documentation is required, Hunter will meet the demands. The step-by-step onscreen guidance of ADASLink ensures no steps are missed, eliminating guesswork and providing a precise and thoroughly documented calibration for more than 25 million vehicles.

For more information, click HERE.

You May Also Like

TPMS Tools and Sensors

Transform TPMS with advanced diagnostics and sensor programming. This video is sponsored by Bosch.

When the first tire pressure monitor system or TPMS tools were introduced in the late 2000s, cell phones looked like this. Today, a cell phone looks like this and is more than just a phone. The same is true for the next generation of TPMS tools and sensors. 

Mazda Front Radar Calibration

Watch to learn how to calibrate the front radar on a Mazda.

BMW Front Radar Sensor Calibration

Joe Keene discusses how to calibrate a radar sensor on a 2017 BMW 750i xDrive.

Audi Driver Assistance System Front-facing Camera Calibration

Joe Keene discusses how to calibrate the front camera on an Audi Q3 after the windshield was replaced.

VIDEO: Mazda Front Camera Calibration

Joe Keene discusses how to calibrate the front camera on a Mazda 6 after the windshield was replaced.

Other Posts

Embracing Cutting-Edge Solutions the Industry has to Offer

Embracing cutting-edge solutions is strategic and imperative for technicians navigating the constantly changing landscape of automotive maintenance and repair.

Nadine Battah
Hunter Engineering Ultimate ADAS System Test at SEMA 2023

Hunter Engineering showed off how Ultimate ADAS works on a 2021 Acura TLX.

Hunter Engineering, UpdatePromise Announce Partnership

Strategic alliance to make top-tier solutions more accessible to service providers.

Autel’s TS900 TPMS Tool

Beyond TPMS, the Autel TS900 shines as a full-service and maintenance tool. Sponsored by Autel.