Walmec Membrane Dryer for Ultra-Clean, Dry Compressed Air

Walmec Membrane Dryer for Ultra-Clean, Dry Compressed Air

The Membrane Dryer lowers the humidity level by venting it harmlessly into the surrounding atmosphere.

The Walmec North America Membrane Dryer (WNA AMD-035) has a four-stage pre-filtration that is critical to the longevity and function of the membrane dryer.   It has a flow rating, of 35 SCFM and maximum working pressures of 150 PSI.

The first- and second-stage filters remove moisture, liquids, dust, rust, scale and other contaminants to 5 microns. An automatic float drain under the second-stage filter opens and expels all collected liquids whenever an ounce or more is present. It is fully automatic with no continuous air loss. 

The third and fourth stages remove any remaining particles down to .01 microns, as well as absorb any remaining moisture or oil vapors. 

The Membrane Dryer lowers the humidity level by venting it harmlessly into the surrounding atmosphere. A flexible input hose assembly eliminates the hazards of damage from vibrations in piped compressed air systems and allows the Membrane Dryer itself to be installed in any position. 

The four-stage pre-filtration includes differential pressure gauges and comes complete with mounting brackets. The differential pressure gauges provide a visual indication of required maintenance, which is easily done by installing the appropriate service kits. No need to remove the unit from the compressed air system.

For more info: walmecna.com

Walmec North America
Phone: 866-764-8377Phone: 507-843-4703Fax: 507-843-4953

You May Also Like

Philips Xperion Work Lights Designed to Save Service Pros Time

The two-part magnetic handles make it easy to aim the light exactly where it’s needed.

Lumileds offers Philips Xperion 6000 LED Flood Lights, designed to help service technicians light up their work area faster and more precisely.

The Xperion 6000 LED Flood and Flood Mini feature pivoting handles with powerful magnets embedded in them, allowing users to mount the Xperion 6000 LED flood lights on most any metallic surface. In addition, the handles are formed from two halves that can be rotated apart to create hooks that can be used to hang the lights. These options make it easy for technicians to quickly aim the light where they need it to get their job done. Both the Flood Audio and Flood mini feature ABS rubber grip surfaces that maintain excellent grip even when covered with oil or grease.

Hunter Engineering Expands Wheelbase for Scissor Lifts

Extra length responds to growing industry needs.

Cementex Debuts New Arc Rated Face Shields

Updated face shield provide classic, reliable arc flash protection.

Hunter Engineering Introduces Hawkeye XL Alignment System

New aligner offers speed, versatility and ease of use, the company says.

Cool Boss Air Coolers Fill Shops with Chilled Air, Tunes

CB-28 and CB-36 evaporative coolers feature air ionizers, Bluetooth players, LED floodlights.

Other Posts

TPMS: Are Retrofits in Your Future?

Installing a retrofit kit can be performed with the tools and equipment you already own and use on a daily basis.

Tire tread
Maximize Your Scan Tool

Are you maximizing your scan tools to their full potential? Don’t let them be just an expensive code reader.

Scan Tool
Upgrade Your Air System: It’s Easier Than You Think

Improving your shop airflow is only a benefit, unless you like to spend more time, work harder and make less money.

air flow tubes
Utilizing Fully Automatic A/C Equipment on Today’s Cars

As technology evolves, fully automatic A/C equipment becomes a greater necessity.

A/C knob