Wynn's Introduces New Transverse III Automatic Transmission Service Machine

Wynn’s Introduces New Transverse III Automatic Transmission Service Machine

Wynn's, a division of Illinois Tool Works, Inc., recently introduced its new TranServe III Automatic Transmission Service Machine - a better, more convenient way to perform a comprehensive transmission service. Wynn's portable new TranServe III, which operates off the vehicle battery, completely flushes contaminated fluid from ....

Wynn’s, a division of Illinois Tool Works, Inc., recently introduced its new TranServe III Automatic Transmission Service Machine — a better, more convenient way to perform a comprehensive transmission service.

Wynn’s portable new TranServe III, which operates off the vehicle battery, completely flushes contaminated fluid from the transmission, torque converter, transmission cooler and cooler lines and refills with fresh automatic transmission fluid (ATF) in 10 minutes or less, even on low-flow vehicles.

Traditional drain and fill machines typically do not drain transmission fluid from the torque converter, transmission coolers or lines. In fact, traditional systems can leave up to 75 percent of the contaminated fluid in the system.

The new Wynn’s TranServe III connects to the transmission through the cooler lines so most of the old, contaminated fluid is removed, including fluid from the torque converter, transmission cooler and lines. And the TranServe III automatically adds the same amount of new ATF as is removed from the vehicle, so no monitoring or adjustments are needed.

Here are some competitive advantages of Wynn’s new TranServe III Automatic Transmission Service Machine:

  • 150 psi capability for virtually all passenger car and light truck applications.
  • Compact size uses minimal floor space.
  • Versatile new fluid reservoir allows service facilities to exchange an exact volume of fluid, up to 12 gallons, or to perform multiple services.
  • Automatic safety switch sends ATF through its normal loop route back to the transmission when the TranServe III tank is empty.
  • Tilt-open chassis and modular equipment deck allows for quick maintenance and repair.
  • Backed by a national distribution network of 300+ service representatives, providing on-site training, repair and maintenance.

“Since many vehicle manufacturers recommend regular transmission fluid service intervals, transmission maintenance can be a solid, profit opportunity for service providers,” said Arnold Gacita, Wynn’s director of U.S. sales and marketing. “And with Wynn’s new TranServe III Service Machine, service centers will be able to provide a more complete, and much more effective, service than could ever be possible with a traditional transmission drain and fill service.”

In addition, all transmission services performed using the Wynn’s TranServe III are covered by Wynn’s new Titanium Warranty. This exciting FREE warranty protects covered components for up to 210,000 miles or eight vehicle model years. Three levels of coverage are available: Gold, Silver and Bronze, with coverage to $4,000. Complete terms and conditions for the Titanium Warranty are available on www.wynnsusa.com.

For more information on Wynn’s new TranServe III Service Machine, as well as the complete line of Wynn’s automotive car care products, visit www.wynnsusa.com.

You May Also Like

Pulling Codes: Multiple Misfire Personalities

A vehicle fails an emission test due to a series of codes, with misfire activity found on cylinders 2, 4, 6, 8 and 3 – and a strange metallic sound can be heard when the rpms are raised. See how Carlton Banks solves this latest Pulling Codes case.

A Story of Codes P0302, 04, 06, 08 & 03
 

This month’s diagnostic journey begins with a 2008 Land Rover Discovery that is taken in to a local testing facility for an emission test and fails due to a series of misfire codes.

Misfire activity is found on cylinders 2, 4, 6, 8 and 3; at first glance this series of codes implies that there may be bank 2 issues, but the cylinder 3 code throws a wrench into that mode of thought.

Using Volumetric Efficiency to Determine the Health of an Engine

Using an OBD II scan tool/dynamometer simulation/calculation program that can graph volumetric efficiency (VE) over rpms, contributor Glen Beanard devised a test sequence using real-world vehicles. This article takes you step by step through his diagnostic process.

Intermittent Engine Misfire Analysis

Even for an experienced diagnostic technician, attempting to diagnose an intermittent misfire condition that occurs only under specific driving conditions can be a frustrating exercise. Contributor Gary Goms breaks it down, and includes tips for using a scan tool and a lab scope.

5 Mistakes Newbie Tire Techs Make

Nothing can turn a new tech into a veteran but time and experience, and often that experience is going to come from making mistakes – sometimes real bad ones – and learning from them (you hope). By addressing these most common mistakes right away with new tire techs, the worst of them can be avoided.

Rivet Bonding Comes Full Blast

Now that rivet bonding is in the mainstream with the Ford F-150, it’s time for shops to look into training and equipment for this repair process.

Other Posts

‘Test Before Touch’ – It’s No Waste of Time

To help reduce the headaches involved in servicing TPMS, it’s important to use the “Test Before Touch” procedures in your shop. Used properly, TBT can form a strong foundation for everything else you do regarding TPMS, reduce complexity and help you educate and keep your customers.

The Right Diagnostic Tools Save You From Extensive Disassembly Time

It can sometimes be difficult to make the correct diagnosis for a hard-to-start complaint. And diagnostic time may be extensive — and expensive. This article shows how certain tools have the ability to automatically analyze waveforms for you.

Know the Specs for Your Social Media Accounts

If you’re doing social media, are you doing it effectively? Are your accounts set up correctly? Are you posting often enough? Mark Claypool answers some questions.

Top 5 Tools: Kenny Younkins, Ken’s Auto Service Center

Kenny Younkins, owner Related Articles – Lisle Low Profile Fuel Line Disconnect – Dent Fix Soft-Shock Mallet DF-SM76 Reduces Damage – New ProMAXX Diesel Fuel Injector Seal Puller/Saver ProKits Ken’s Auto Service Center Akron, OH While Ken first said his favorite tool is his fishing rod, he said in the shop he prefers these five: