In this tip clip, instructor Jim Wilson talks about P0300 codes and misfire testing using your scan tool. He talks about how you would look at certain things such as RPM, MAP, changes in load, and long term fuel trims. He goes on to mention some things technicians should be aware of on Ford and Chrysler vehicles.
This clip is an excerpt from the 90 minute comprehensive “Functional Scanner Testing” training program with Jim Wilson, available from Automotive Video.
Joe Keene speaks with Hunter Engineering service rep Rick Marzen on Hunter’s premium center-clamp Maverick tire changer.
Joe Keene, automotive content video producer at Babcox Media, speaks with Hunter Engineering service rep Rick Marzen on Hunter’s premium center-clamp Maverick tire changer and runs thorough a demonstration of a typical low-profile sidewall procedure. This video is sponsored by Hunter Engineering Co.
Joe Keene discusses the calibration procedure for a Hyundai Santa Cruz that needed a windshield replacement and rear bumper repair.
Learn how this lift integrates mechanical repair, four-wheel alignment, and ADAS calibration, prioritizing efficiency and space utilization in your shop.
In this episode of Tool Time, Nadine and Eric sit down with Chris Springer of SATA USA.
This video will focus on how a product like CAT COMPLETE can improve the chances of completing the monitors faster. This video is sponsored by Rislone.
Jim O’Hara from Clore Automotive joins Nadine Battah and Eric Garbe.
Babcox Media’s Joe Keene provides a quick overview of many examples that demonstrate ADAS work should be in play for almost everyone.
Discover how to quickly retrieve codes, access exclusive repair information, and develop a strategic plan for optimal diagnostic results. This video is sponsored by Bosch.
The Special Test menu has functions that can help you diagnose a problem, finish a repair, and confirm the fix. This video is sponsored by Bosch.
