Road to AAPEX Season 2 Ep. 5

Road to AAPEX Season 2 Ep. 5

See how Babcox Media's Joe Keene prepares the Lincoln Blackwood for the road.

To know where you’re going, you have to know where you’ve been. For Babcox Media’s Joe Keene, an ASE-certified technician charged with fixing up a rare Lincoln Blackwood, it means heading back to Transtar Autobody Technologies in Detroit to put the finishing touches on the Blackwood. Then, he’ll put Babcox Media HQ in the rearview mirror as he heads out on the Lincoln Highway on his way to AAPEX. One of his first stops is the Studebaker Museum in South Bend, Ind., where he hopes to bridge the connection between the automotive industry’s past and its future.

“What most people don’t know about Packard is that between 1902 and 1912, they produced 1,841 electric Packard cars,” Keene explained as he observed the classic cars. “From 1900 to 1912, a third of all U.S. cars were electric. So, seeing this resurgence of electric cars today is pretty interesting.”

In 1919, Henry Ford introduced an electric starter, generator and lighting to the Model T. This made the vehicle much easier to start compared to hand cranking, and it was more affordable than the electric car. The rest is history.

Fast forward to today. While Keene continues down the historic highway in the refurbished Lincoln, Babcox Media Editor David Sickels sets off to visit Proterra, a company leading the charge in today’s battery-driven EVs.

“I think we are at the tip of the iceberg in terms of EV adoption,” said Chris Bailey, chief business officer at Proterra. “I believe the single greatest force we’ll encounter over the next five to 10 years is the rate at which we expect the market to adopt this technology. Along the way, we’ll undoubtedly see several new innovations and technologies emerging to address the varied commercial market segments.”

Watch the video above to see how Keene prepares the Lincoln Blackwood for the road (with assistance from Transtar), and get a glimpse into the automotive future as Sickels explores Proterra.

This episode is sponsored by United Motor Products.

You May Also Like

Introduction to the Maverick Tire Changer

Joe Keene speaks with Hunter Engineering service rep Rick Marzen on Hunter’s premium center-clamp Maverick tire changer.

Joe Keene, automotive content video producer at Babcox Media, speaks with Hunter Engineering service rep Rick Marzen on Hunter’s premium center-clamp Maverick tire changer and runs thorough a demonstration of a typical low-profile sidewall procedure. This video is sponsored by Hunter Engineering Co.

Hyundai Front Windshield Camera Sensor and Blindspot Calibration

Joe Keene discusses the calibration procedure for a Hyundai Santa Cruz that needed a windshield replacement and rear bumper repair.

Autel’s ADAS Bay Max Vehicle Lift

Learn how this lift integrates mechanical repair, four-wheel alignment, and ADAS calibration, prioritizing efficiency and space utilization in your shop.

Tool Time Podcast: SATA USA

In this episode of Tool Time, Nadine and Eric sit down with Chris Springer of SATA USA.

How-to Complete Emissions Monitors Faster

This video will focus on how a product like CAT COMPLETE can improve the chances of completing the monitors faster. This video is sponsored by Rislone.

Other Posts

Tool Time Podcast: Clore Automotive

Jim O’Hara from Clore Automotive joins Nadine Battah and Eric Garbe.

ADAS Calibrations: Limited Space

Babcox Media’s Joe Keene provides a quick overview of many examples that demonstrate ADAS work should be in play for almost everyone.

Software Focus: Efficient Diagnostics

Discover how to quickly retrieve codes, access exclusive repair information, and develop a strategic plan for optimal diagnostic results. This video is sponsored by Bosch.

Taking Advantage of Vital Software Tools: Special Tests

The Special Test menu has functions that can help you diagnose a problem, finish a repair, and confirm the fix. This video is sponsored by Bosch.