Naperville IL 60540
How Dirty Is Your 'Clean' Radiator?
The LTI Radiator Rocket safely cleans with a 4” slot in a brush head that is always positioned 90° toward radiator fins.
Loosen Rusted Sensors with LTI's Shockit Socket Kit
Each Shockit Socket has three driving ears with 8mm indexed holes for tightening and loosening.
Remove O2 Sensors with LTI Shockit Socket Kit
Shockit Sockets access, loosen and remove frozen O2 sensors.
Lock Technology Offers Shockit Crows Foot & Line Wrench Sets
Air hammer-powered offset self-centering punches connected to interlocking Shockit Crows Feet and Line Wrenches offer access to buried fasteners.
LTI's Kentucky Kicker Shockit Driver Kits Access, Remove Frozen Nuts and Bolts
The tool utilizes hypersonic air hammer repetitive vibrations to free bolts and nuts without galling fastener threads.
LTI Radiator Rocket Coil and Line Cleaner
The 4-in. air slot in the brush head puts out maximum air cleaning volume and pressure without damaging coils, lines or fins.
Easily Remove Obstructed O2 Sensors, Diesel NOx Sensors
The Shockit Socket O2 Sensor Removal Kit from Lock Technology features a low-profile design for limited access and long-profile design for deep recessed applications.
Loosen and Remove Frozen O2 Sensors with LTI's Kit
The kit includes a low-profile design for limited access and long profile design for deep recessed applications.
Get the Edge in Auto Repossession with LTI
Speed and ease of use highlight the operation of this lock-out kit.
Universal Seal/Bearing Puller from LTI Tools
Use with your air hammer for easy one-person operation on 90% of all seals and race bearings.
Lock Technology's German Vehicle Rotating Ring Security Lug Nut Removal Tool Kit
Lock Technology has developed a simple, low-cost tool kit to remove these impenetrable lug nut locks.
LTI Tools Offers German Vehicle Rotating Ring Lug Nut Removal Kit
This kit allows technicians to remove German vehicle lug nuts without the factory key.
Hollow End Line Taps from LTI Tools
Hollow end line taps rethread female fittings without line removal. The hollow end tap slides over the flared end of the line easily, rethreading the female connector.
Don’t Damage Rims to Remove Frozen Lug Nuts – Get LTI Tools’ Lug Ripper II
The tool only drills out the internal threads of the lug nut and the external threads of the stud, so you can easily replace a damaged lug nut/stud.
Texas Twister Air Hammer Pulling Kit
Convert your air hammer into a pneumatic slide hammer with this set. Utilize air hammer pulling power where slide hammers won’t fit, and extend the reach of the tool by using the 20” extension.
LTI Tools Offers Brake Line/Brake Cylinder Fitting Re-Threading Kit
Techs can re-thread brake wheel cylinders, master cylinder fittings, ABS control module fittings and brake line fittings on the vehicle.
LTI Tools Offers Universal Wheel Bearing Hub Removal Tool
Safely remove all frozen hubs instantly with LTI Tools’ Universal Hub Shocker Wheel Bearing Hub Removal Tool.
LTI Tools Radiator Rocket
The kit comes complete with everything you need.
LTI Shockit Socket O2 Sensor Removal Kit
A new way to remove stubborn O2 sensors.
LTI Kentucky Kicker Shockit Driver Kits
Put some extra "kick" into your air hammer.
LTI Shockit Line Wrench Sets
A new method for fastener access and removal.
LTI Shockit Crows Foot Sets
The LT1900 and LT1910 series Shockit Crows Foot Sets offer a new method for fastener access and removal.
Is this your listing?
Need to update your listing? Click the link below to visit the update listing form. Please make sure to have your "PIN" number on hand. If you don't remember your "PIN" please contact us.