Hyundai Tech Tip: Diagnosing Unstable Idle Conditions

Hyundai Tech Tip: Diagnosing Unstable Idle Conditions

Some Hyundai vehicles with 2.4L or 3.5L engines may experience an intermittent unstable idle condition. Follow this simple procedure to diagnose an intermittently sticking closed EGR solenoid valve.

Some Hyundai vehicles with 2.4L or 3.5L engines (see affected models below) may experience an intermittent unstable idle condition with the following symptoms:
• Intermittent unstable/rough idle condition;
• The check engine light may or may not be on. If it is on, code P0401 (EGR insufficient flow) may be stored; and
• The condition may not be present when the engine is cold. Once the engine warms up, the unstable idle condition may appear.

AFFECTED MODELS:
• 1999-2004 Sonata 2.4L;
• 2001-2004 XG300/XG350; and
• 2001-2004 Santa Fe 2.4/3.5L.

If a vehicle has the above-described condition, follow the simple procedure below to diagnose an intermittently sticking closed EGR solenoid valve. The EGR solenoid valve is a normally open-type valve. If the solenoid is not energized, the valve is open and allows the vacuum to bleed off (not opening the EGR valve). At idle, the EGR solenoid valve is not energized and, thus, the EGR valve is not open.

Note: For detailed information on EGR system function and diagnosis, refer to TSB #01-36-021.

DIAGNOSTIC PROCEDURE:
1. Duplicate the unstable/rough idle condition (warm up the engine).
2. While the engine is idling roughly, disconnect the green striped vacuum hose from the top of the throttle body.
3. If the idle becomes normal, the EGR solenoid valve is sticking closed.

Technical service bulletin courtesy of ALLDATA. For additional information, visit www.alldata.com.

You May Also Like

Honda to Establish EV Value Chain in Ontario, Canada

It will strengthen EV supply system and capability with an eye toward a future increase in EV demand in North America, Honda said.

Honda Motor Co., Ltd. announced it plans to build a comprehensive EV value chain in Canada with an approximate investment of CAD$15 billion (USD$11 billion), including investment by joint venture partners, to strengthen its EV supply system and capability to prepare for a future increase in EV demand in North America.

Tool Time Podcast: CTA Tools

In this episode, Nadine Battah and Eric Garbe sit down with CTA Tools’ Alex Borghard and Alberto Roland to discuss the specialty tools their company offers.

#8 Shop Air Systems

An aging air system can affect the output of air tools and equipment.

Shop Aire Systems
Mobis Starts Construction of EV Battery System Plant in Spain

The new EV battery system plant will supply Volkswagen and is aiming for mass production by 2026.

#7 Wrenches

Wrenches are the core of every tool collection.

Wrenches

Other Posts

Maverick Tire Changer: Bead Massage

The bead massage feature on the Maverick tire changer helps with better tire and wheel fitment for balancing.

Navistar Surpasses 100 Authorized EV Dealers

Navistar will have more than 30% of its dealer locations ready to support the sale and service of both International and IC Bus EVs.

ADAS: Coming of Age

ADAS are categorized into levels, determined by the amount of automation for any given system.

Hunter Maverick Tire Changer: 19.5-inch Tire Service

Learn to handle 19.5-inch wheels, which are common on some delivery vehicles, with Hunter’s Maverick tire changer.