BendPak, Inc.

This essential tool quickly pays for itself with new business and customer satisfaction.

Traditional shop safety programs focus on slip, trip and fall hazards. They also should address heat stress because it can be a major contributor to accidents and work-related injuries, especially in the summer months.

BendPak overhauls brand to deliver professional-quality, affordable equipment.

The new lineup includes a variety of lifts and capacities, tire changers, wheel balancers, rolling jacks and accessories.

Failure to check the sticker could void the refrigerant recovery machine’s warranty.

Like all equipment, floor jacks should be inspected regularly for damage and kept clean.

Here are eight tips for maintaining your transmission jacks.

Save up to $500 on car lifts and equipment from BendPak, Ranger, QuickJack and MaxJax

Like any equipment, your brake lathes need regular care and maintenance to operate at peak efficiency. Keep your brake lathe running smoothly by following these 10 daily tips.

If your lift stops working correctly, it’s costing you money. Let’s take a look at how to troubleshoot some common issues and get your lift back to work.

If something doesn’t seem right, stop using the lift until you can get it checked out. Never use a lift if any component is broken or damaged.

The company is adding 120,000 square feet to California headquarters and new Alabama operation.

In this article, we’ll explore how to maintain your lift cables or “wire ropes,” how to look for damage and when to replace a cable.

This acquisition further extends BendPak’s fast-growing portfolio of brands and strengthens its product offering.

The new warehouse will stock all of BendPak’s popular products including its Ranger, QuickJack and Autostacker brands.

The move, coming on the heels of a massive expansion just months prior, marks a new chapter for BendPak in one of the company’s most decisive growth phases.

BendPak hosted a public ribbon-cutting ceremony to commemorate the opening of its new warehouse.

All service and parking lift models will change to the new gunmetal gray color. BendPak will be taking orders for the new color mid-December 2016.

Demand continues to grow for BendPak-Ranger prompting the company to expand its facility one more time.

New and improved models lift more, last longer and are easier to use.

AP Series features unique nested arms, Automatic Swing Arm Restraint System and other safety features.

This work seat offers a range of adjustments to make performing awkward tasks in the shop less uncomfortable.

The lift comes with free-floating, HD turnplates and rear slip plates built right into the runways for maximum convenience.

These portable evaporative air coolers plug into a 110V outlet and continuously cool the air in a 3,000-sq.-ft. area.

The lift’s extra-long frames provide access to a range of lifting points from 47.5-76 in., with a capacity of 6,000 lbs.

Thanks to an innovative design that supports a full line of accessories, it also doubles as a powertrain lift.

Tough and portable rechargeable work light provides hands-free illumination.

Like the electric vehicles it supports, the SL24EVT EV battery pack and powertrain lifting system is battery-powered.

Each unit features an energy-efficient motor and large reciprocating cylinder heads running at slower speeds to provide powerful, cool and energy-efficient compressed air.

These extra-tall asymmetrical lifts provide more under-lift clearance to help reduce neck and back pain.

Unlike traditional two-post lifts, the MaxJax can be used in areas with ceilings as low as 8 ft. and can be put away when the work is done, leaving the garage bay clear.

The Cool Boss pulls in hot air through the back and cools it instantly using an evaporative media that reduces the air temperature by as much as 26°.

Dual-assist, tilt-back design saves time, minimizes technician fatigue.

The parts washers provide a deep clean on even the greasiest and smallest automotive parts.

Your dream of bringing a full-sized BendPak car lift to your desktop, shop or shelf has finally arrived.

The automatic CoolCharge is 100% programmable, so there's no standing over and babysitting the automated recharge and recovery process.

The three-stage telescoping lift arms give you the versatility and power to safely lift any vehicle up to its 12,000-lb. capacity.

BendPak's low-ceiling GrandPrix lift will be on full display, as well as QuickJack and the Autostacker parking lift.

The HDS-14LSX alignment system features front turn plates and rear slip plates built into the runways.

BendPak Inc. recently won a contracted bid to provide municipalities and government buyers with lifts, wheel balancers, tire changers and brake lathes.

The DST30P handles wheels up to a 30” diameter and features the 64-tooth magnetic transducer encoder built in for incredibly precise wheel weight placements.

BendPak’s new XPR “S” series lineup, available in 9,000- and 10,000-lb. capacities, features stackable risers that can be used in conjunction with the adjustable screw pads for greater versatility.

Lightweight impact-resistant wheel targets and high-resolution tower-mounted cameras provide live alignment readings and diagnostic data with pinpoint accuracy.

This high-powered oil filter crusher applies 10 tons of pure, air-operated pressure to just about any used oil filter, easily reducing it to 25% of its original size and removing 95% of the oil. With an integrated collection chamber and collector downspout for simple oil recovery, this no-mess design operates clean and efficiently to significantly reduce spill hazards.

Ranger Products' R80DTXF tire changer features an automatic bead lifter, variable speed turntable and bilateral bead loosener with direct hand-operated controls.

Ranger Products, a division of BendPak Inc., is bringing another new tire changer to market. Its latest R80DTXF tire changer features an automatic bead lifter, variable-speed turntable and bilateral bead loosener with direct hand-operated controls. Other time saving tools include a traveling drop-center tool, top bead assist rollers, dual lower bead lifting discs and a

Ranger Products, a division of BendPak Inc., announces the new R980ATF, a variable-speed model that performs masterfully on a wide variety of wheels, including virtually all OEM and performance tire and wheel configurations.

BendPak recently unveiled its LR-5T, a 10,000-lb. capacity low-rise lift that accommodates passenger cars and trucks thanks to a newly designed lift platform, specialty adapters, wider drive-over capability and increased lifting capacity. Convenient built-in storage trays mean lug nuts and other small parts are always within reach.

The 3,500-lb. capacity lightweight QuickJack from Ranger Products can go anywhere and can be easily stowed in the trunk or back seat of most cars when not in use.