CTA Manufacturing Corporation

The special angled extensions with a locking design allow access in hard-to-reach applications.

When paired with the #7015 Pressure Bleeder Tank, this set will service most makes and models.

These piston ring compressors feature an enlarged crimped edge to prevent the compressor from entering the cylinder.

These adapters are used for re-filling ATF during service. A wide range of adapters are included.

With these tools, technicians can service newer Dodge/Chrysler/Jeep models with Pentastar VVL 3.6L engines.

The stand features a magnetic bottom for secure placement on metal surfaces anywhere around the shop.

The unit has a vacuum release button for quick and easy release.

The CTA Injector Puller Kit removes frozen or stuck on injectors without removing the electrical components.

The Glow Plug Puller Kit is especially useful in narrow engine bays, with glow plugs nearest the fire-wall. Remove broken glow plugs from the top of the cylinder head without damage.

The CTA Injector Seat and Chamber Cleaning Set (7810) cleans injector seats and holes prior to installation of new injector.

The tap, drill bit and extractor holders are fitted to the body of the original plug and slide in for perfect centering.

CTA's two brake bleeding bottles with a built in heavy-duty magnet (7786) allows for secure placement to allow the user to complete a brake service quickly, easily and without mess or damage.

The Lug Driller from CTA Tools removes the most difficult locking lug bolts quickly, safely and without damage to the wheel or rim.

The CTA Tools Deep Metric Socket Set features 120mm long metric sockets for extra-deep reach to provide access to recessed areas with extra long bolts, as found on some bumpers, rear lamps, glow plugs and door hinge fittings.

These new Hose Clamp Pliers from CTA Tools feature a 30mm circle head with multi-directional diamond pattern for secure grip and a wide application range

Wrenches seal to the bleeder valve, and tighten or loosen the valves without breaking the seal.

CTA's kit flushes out impurities in the oil that could cause extra wear and tear on the transmission.

The kit allows users to effortlessly analyze voltage, continuity, impedance and current.

The sockets adjust to the proper angles around the direct fuel line for a reassured grip without losing torque.

The kit fits both import and domestic vehicles and trucks, and includes special tools for coolant sensors, wiring harnesses and terminal blocks on most modern vehicles.

This tool's patented design and grooved pins hold the camshaft pulley stationary, while loosening and tightening the center shaft bolt.

The lock ring tool is great for CV shafts, wheel hubs, axle shafts, cam shafts and other lock ring applications.

The scissor design and angled tongs fit into tight and deep spots where fingers can’t.

Included in the kit are seven 3/8” square drive metric sockets, for the most common applications, and the Vibro-shaft with built-in articulated wrench. Each socket includes an “internal edge,” allowing the socket to seat on the hex drive of the fastener.