Connect with us

Buyer’s Guide

Need to update your Buyers Guide Listings?

Click Here

Not Listed? Add your company information.

Click Here

Mohawk Resources, Ltd.

Phone: 800-833-2006Phone: 518-842-1431Fax: 518-842-1289 P.O. Box 110
Amsterdam NY 12010

Recent Products

Raise Medium-Duty Vehicles with Mohawk 18,000-lb. Capacity Two-Post Lift

by TechShop Staff Writers - 08-28-2017

Mohawk’s TP-18 two-post lift is a clear-floor, above-ground lift capable of raising medium-duty vehicles up to 18,000 lbs. This is a two-post, medium- to heavy-duty lift that handles the wide...

Mohawk Offers 12,000-Lb. Low-Ceiling Two-Post Lift

by TechShop Staff Writers - 01-25-2017

Mohawk’s LC-12 is a low-ceiling, clear-floor, above-ground lift capable of raising light- and medium-duty vehicles up to 12,000 lbs. Two 4” heavy-duty cylinders make for safer, steadier lifti...

Service Turf Equipment with Mohawk Lifts Dual Trough Accessory

by TechShop Staff Writers - 12-07-2016

Mohawk Lifts has released a new accessory to service cars, trucks, zero turn mowers, turf equipment and four wheelers. The turf kit with dual trough has a 6,000-lb. capacity and can be used on ...

Doing Transmission Work? Mohawk Lifts Helps with 2,000-lb. Capacity Scissor Lifting Table

by TechShop Staff Writers - 07-20-2016

  Mohawk’s SLT-2000 is a 2,000-lb. capacity scissor lifting table made to remove or install large transmissions, rear ends or differentials. The SLT platform is 4′ long by 2′ wide...

Mohawk Helps You Turn A Two-Post Lift Into A Quick Drive-On Lift

by TechShop Staff Writers - 11-13-2015

Mohawk Lifts’ SPEEDLANE is a drive-on adaptor for a two-post lift to quickly convert the frame-engaging swing arm lift into a drive-on pad lift to leave the wheels hanging free for tire, brake and u...

Mohawk Offers Complete Lift Installation in 5 Hours

by TechShop Staff Writers - 09-24-2014

  Mohawk Resources Ltd. offers the 18,000-lb. capacity model TP-18 and the 26,000-lb. capacity model TP-26. These two-post, frame contact lifts are made to suit the needs of heavy-duty ...

Mohawk Lifts’ USL-6000 Is a Space-Saving Scissor Lift

by TechShop Staff Writers - 08-12-2014

Mohawk Lifts’ USL-6000 universal scissors lift is a 6,000-lb. capacity full-rise, no-post, portable lift, giving shops full side and under-vehicle access. The USL-6000 features all the benefits o...

Recent News


BendPak, Inc.

BendPak logo
Phone: 805-933-9970Fax: 805-933-9160 1645 E. Lemonwood Drive
Santa Paula CA 93060

Recent Products

Bend-Paks $199 Two-Post Lift

by TechShop Staff Writers - 10-10-2019

Small In Scale, But Not In Awesomeness Your dream of bringing a full-sized BendPak car lift to your desktop, shop or shelf has finally arrived. Introducing the world’s first fully-functio...

BendPak R-134A Recovery, Recycling and Recharging Machine

by TechShop Staff Writers - 07-09-2019

There's nothing easier than programming your A/C settings and walking away to let the machine do its job. The same intuitive thinking that Ranger has brought to more shops worldwide than arguably...

BendPak 12,000-lb. Capacity 2-Post Lift

by TechShop Staff Writers - 06-17-2019

BendPak's XPR-12CL-LTA two-post lift gives you the ability to reach lift points on long wheelbase commercial trucks with its super-long 72-in. maximum arm reach. The three-stage telescoping lift...

BendPak to Showcase New Lift Technology at SEMA

by TechShop Staff Writers - 10-19-2018

BendPak will attend SEMA for four full days of car enthusiast heaven in Las Vegas. BendPak's low-ceiling GrandPrix lift will be on full display, as well as QuickJack and the Autostacker parking lift. ...

Maximum Alignment Convenience with BendPak’s HDS-Series Alignment Lifts

by TechShop Staff Writers - 08-21-2017

BendPak’s HDS-Series alignment lifts are engineered to meet the strenuous demands of even the toughest professional lifting jobs, says the company. The HDS-14LSX alignment system features fro...

BendPak Wins Bid to Supply Automotive Service Equipment to Government

by TechShop Staff Writers - 03-10-2017

BendPak Inc. recently won a contracted bid to provide municipalities and government buyers with lifts, wheel balancers, tire changers and brake lathes. The bid was awarded through the National ...

Ranger Wheel Balancer Features Faster Speeds While Taking Up Less Space

by TechShop Staff Writers - 02-06-2017

The DST30P is a cost-effective hybrid unit that offers the most precise readings you’ll ever generate from a wheel balancer, says the company. The DST30P handles wheels up to a 30” diameter...

BendPak Enhances Two-Post Car Lift Line

by TechShop Staff Writers - 06-06-2016

BendPak recently unveiled an entirely new series of two-post lifts that feature two-stage telescoping screw pads. The recent total model overhaul includes other design enhancements that focus on str...

BendPak-Ranger Introduces 3D Wheel Alignment System

by TechShop Staff Writers - 07-22-2015

Ranger Products recently introduced its new Target 3DPro 3D Imaging Wheel Alignment System for domestic and import cars and trucks. Lightweight impact-resistant wheel targets and high-resolution to...

BendPak's Powerful Ranger Oil Filter Crusher Goes Green To Save Green

by TechShop Staff Writers - 05-19-2015

In just 20 seconds, Ranger Products’ high-powered RP-20FC Oil Filter Crusher applies 10 tons of pure, air-operated pressure to just about any used oil filter, easily reducing it to 25% of its origin...

Ranger Introduces New Automatic Leverless Tire Changer

by TechShop Staff Writers - 07-23-2014

Ranger Products, a division of BendPak Inc., is bringing another new tire changer to market. Its latest R80DTXF tire changer features an automatic bead lifter, variable speed turntable and bilateral b...

Ranger Introduces New Automatic Leverless Tire Changer

by TechShop Staff Writers - 04-15-2014

Ranger Products, a division of BendPak Inc., is bringing another new tire changer to market. Its latest R80DTXF tire changer features an automatic bead lifter, variable-speed turntable and bilateral b...

Ranger Introduces New Multi-Speed Tire Changer

by TechShop Staff Writers - 02-18-2014

Ranger Products, a division of BendPak Inc., is bringing another new tire changer to market. The company’s new R980ATF is a variable-speed model that performs masterfully on a wide variety of wh...

BendPak's New Low-Rise Lift Picks Up Where Others Leave Off

by TechShop Staff Writers - 01-30-2014

BendPak recently unveiled its new LR-5T — a 10,000-lb. capacity low-rise lift that accommodates passenger cars and trucks thanks to a newly designed lift platform, specialty adapters, wider drive-...

The QuickJack By Ranger Is the Ultimate Motorsports Jack System

by TechShop Staff Writers - 10-15-2013

Ranger Products, a division of BendPak, recently unveiled its new QuickJack portable jack system that makes vehicle maintenance — on the track and off — convenient and lightning fast. The 3,500-lb...

Recent News

BendPak Set to Begin Construction on New Facility Early 2018

by TechShop Staff Writers - 10-27-2017

  BendPak Inc. is set to expand for the second year in a row with a 50,000+ sq. ft. facility. The move, coming on the heels of a massive expansion just months prior, marks a new chapter fo...

BendPak Opens New 70,000-sq.-ft. Warehouse

by TechShop Staff Writers - 03-06-2017

   BendPak Inc. has added yet another large-scale expansion to its complex. After nearly seven months of construction, the completed 70,000 sq. ft. shipping and receiving facility, which sits jus...

Blue No More, BendPak Goes Gray

by TechShop Staff Writers - 11-17-2016

BendPak is switching the color of its lifts from its traditional blue to gunmetal gray. According to the company, “People know us well enough that we don’t need to announce our presence eve...

Bendpak Breaks Ground On New Warehouse and Shipping Complex

by TechShop Staff Writers - 10-30-2014

    BendPak, Inc. announced the recent groundbreaking to celebrate beginning construction of a 67,000 square-foot multipurpose warehouse and shipping center located on 3.7 acres of...


Cutting Edge Automotive Solutions

Phone: 855-839-2626 22703 Racine Street
Robertsdale AL 36567

Recent Products

Recent News

Cutting Edge Automotive Solutions Launches New Online Store

by TechShop Staff Writers - 06-18-2019

In keeping with the tradition of providing world-class customer experience, Cutting Edge Automotive Solutions launched a brand-new online store CEASUSA.COM. The main emphasis of the new website i...


Hunter Engineering Company

Hunter Engineering logo
Phone: 314-731-3020Fax: 314-731-0000
Contact: Maddie Laviolette
11250 Hunter Drive
Bridgeton MO 63044

Recent Products

Hunter Engineering unveils new BL Series bench lathe at the 2019 SEMA Show

by TechShop Staff Writers - 11-13-2019

Hunter Engineering unveiled their new BL Series bench lathe at the 2019 SEMA Show in Las Vegas. The BL Series bench lathe adds new capabilities to their previous generation models. The BL Seri...

Hunter Engineering Releases Harsh-Duty Option for Standard RX Lift Racks

by TechShop Staff Writers - 06-17-2019

Hunter Engineering has released an optional harsh-duty variation for its standard RX scissor lift racks. First in the industry to introduce powder-coating on runway-style lift racks, Hunter no...

Hunter Engineering Announces Inspection Integration with Dealer-FX

by TechShop Staff Writers - 05-29-2019

Hunter Engineering has announced a new integration partnership with Dealer-FX and its ONE Platform service experience. A service dashboard that provides control over dealership workflow and creat...

Hunter Engineering's Tool Brings In More Revenue by Reporting Alignment Machine Utilization

by TechShop Staff Writers - 03-12-2019

Hunter’s Push Reports are available for shops with Hunter’s HawkEye Elite alignment machine. Push Reports have proven to increase shop productivity and performance by providing managers with ...

Hunter Engineering to Showcase Quick Tread Edge at NADA Show

by TechShop Staff Writers - 01-23-2019

Hunter Engineering will showcase its next-generation drive over tire tread depth measuring tool, Quick Tread Edge, at the 2019 NADA Show, Jan. 25 – 27 (Booth No. 4605N) in San Francisco, CA. ...

Hunter Engineering Releases Performance-Driven Tool for Inspection Equipment

by TechShop Staff Writers - 01-09-2019

Hunter Engineering’s new performance-driven tool, Push Reports, is now available for shops with Hunter inspection equipment. Push Reports boost shop performance by automatically providing manage...

Hunter Engineering Launches Public Merchandise Shop

by TechShop Staff Writers - 12-18-2018

Hunter Engineering has launched a new merchandise website through for anyone who would like to purchase Hunter promotional and merchandise products, such as hats, apparel, die cast mode...

Hunter Engineering SmartWeight Pro Offers Premium Features

by TechShop Staff Writers - 12-11-2018

Hunter Engineering Company's SmartWeight Pro is latest intuitive, mid-range wheel balancer that offers upscale, premium features. The wheel balancer is equipped with a no-touch wheel measureme...

Hunter Engineering Introduces Quick Tread Edge at SEMA

by TechShop Staff Writers - 10-30-2018

Hunter Engineering Company will showcase its next-generation drive over tire tread depth measuring tool, Quick Tread Edge, at the 2018 SEMA Show on Oct. 30 – Nov. 2 (South Hall, Booth 41013). ...

Hunter Engineering to Showcase Touchless Inspection Technology at SEMA

by TechShop Staff Writers - 10-30-2018

Hunter Engineering Company will showcase its new unmanned alignment inspection system, Quick Check Drive at the 2018 SEMA Show on Oct. 30 – Nov. 2 (South Hall, Booth 41013). Released in July ...

Hunter Engineering Launches 2 Center-Clamp Tire Changer Models

by TechShop Staff Writers - 08-16-2018

Hunter Engineering Company has launched its latest family of center-clamp tire changer models, the TC37 and TC39. Both models offer immense features and value in the growing segment of mid-rang...

Hunter Engineering Launches Quick Check Drive — a Touchless Alignment Inspection System

by TechShop Staff Writers - 07-18-2018 Hunter Engineering Co. launched its latest vehicle service innovation, Quick Check Drive – a touchless alignment inspection system that provides insta...

Hunter Engineering Introduces Quickgrip Adaptors for Fast Alignment

by TechShop Staff Writers - 05-14-2018

Hunter introduced the WinAlign HD QuickGrip adaptors that provide faster installation to speed alignment service and prevent rim damage with no metal-to-metal contact. With the WinAlign and QuickG...

Hunter Introduces New Low-profile, High-capacity Lift Rack

by TechShop Staff Writers - 04-20-2018

Hunter's new RX14 Scissor Lift provides massive capacity with a small footprint. The RX14 Fully Integrated Alignment speeds alignment service by 60 percent with synchronized aligner and lift ra...

Hunter's Revolution Tire Changer Offers Autonomous Operation

by TechShop Staff Writers - 04-18-2018

The Revolution tire changer with WalkAway capability from Hunter Engineering features 80 seconds of autonomous bead breaking and demounting that can be performed without an operator present. Th...

Hunter Engineering Presents Tire Changer T.K.O. Video Series

by TechShop Staff Writers - 03-15-2018

See the TCX Table-Top Tire Changer series in action in this informative new video series. Hunter's tire changer scientists conducted a series of comparison tests to demonstrate the mass, power, spee...

Hunter Releases Educational Video to Answer the Question: Why Do Cars Need Wheel Alignment?

by TechShop Staff Writers - 02-07-2018

Hunter has released an educational video to answer the common question: "Why do cars need wheel alignment?" to explain the purpose and function of wheel alignment procedures and the importance of pr...

Hunter Road Force Elite Balancer Update 4.0 Released

by TechShop Staff Writers - 11-29-2017

Miscentering during wheel balancing is a major cause of improper balancing and customer comebacks. Hunter’s Road Force Elite features Automatic CenteringCheck technology with new 4.0 software th...

Hunter's Revolution Tire Changer's WalkAway Capability Reduces Tire Changing and Balancing Times

by TechShop Staff Writers - 11-06-2017

The Revolution tire changer with WalkAway capability features 80 seconds of autonomous bead breaking and demounting that can be performed without an operator present. The Revolution allows the operato...

Hunter Releases Next-Generation WinAlign Consoles

by TechShop Staff Writers - 08-28-2017

Hunter introduces the next generation of WinAlign consoles, WA500 and WA600. The new consoles feature Hunter’s new HW2 PC running Windows 10 and WinAlign 15.1 software. The HawkEye Elite aligner ...

Hunter Releases New Quick Tread Console for Automatic Inspection Technology

by TechShop Staff Writers - 08-16-2017

Hunter’s Quick Tread inspection technology automatically measures tire tread depth and captures vehicle identification in seconds as motorists drive into the service lane. The new, compact console p...

Hunter Quick ID Vehicle Identification Technology Accelerates Inspection Times

by TechShop Staff Writers - 06-13-2017

Technicians can accelerate Hunter vehicle inspections with Quick ID. The new technology automates vehicle identification, saving valuable time and labor. Quick ID instantly identifies the vehic...

Time-Saving and Ease-of-Use Accessories Included with Hunter TCX625 Plus HD Tire Changer

by TechShop Staff Writers - 05-26-2017

Hunter’s TCX625 Plus HD combines compact size with a unique mount/demount roller mechanism to provide high performance servicing of heavy-duty, over-the-road truck assemblies and includes severa...

Hunter Engineering Offers Compact Inspection Lane Footprint Option

by TechShop Staff Writers - 04-26-2017

The Quick Check inspection lane and Quick Tread drive-over tread depth system from Hunter Engineering Company now feature a 25% smaller footprint option. Now customers with tighter space requir...

Hunter Releases New Mount Head for Table-Top Tire Changers

by TechShop Staff Writers - 01-03-2017

Hunter’s new plastic mount head for tabletop tire changers is optimized for today’s wheels. Raised spoke wheels and clad wheels that can challenge other mount heads are simple for Hunter’...

Hunter Engineering’s Updated Tire Changer Features Enhanced Split-Bead Roller System

by TechShop Staff Writers - 12-05-2016

Updates to Hunter Engineering Company's TC3700 tire changer enhance ease-of-use with a new bead roller positioning system, says the company. The new controls allow the operator to easily pre-posit...

Hunter Engineering Releases New AutoComp Elite Brake Lathe

by TechShop Staff Writers - 11-16-2016

Hunter has released the new AutoComp Elite brake lathe featuring automatic compensation technology. The patent-pending AutoComp compensation system directly determines the position of the internal...

Perform Alignment Checks with Proper Tire Pressure on Hunter Engineering's Inflation Station

by TechShop Staff Writers - 10-25-2016

Hunter Engineering Co. has launched a new Inflation Station that is compatible with its Quick Check system. The station may also be installed as an independent system, the company said. The Inf...

Hunter Quick Tread Adds Enhanced Flush Mount Design

by TechShop Staff Writers - 10-10-2016

Hunter Engineering Co.’s Quick Tread system is now available in a new flush mount design. According to Hunter, the new design eliminates obstructions or obstacles in the inspection lane and h...

Hunter HD PowerSlide Turnplates Available In Flush Mount Configuration

by TechShop Staff Writers - 06-22-2016

Hunter Engineering’s WinAlign HD alignment system now offers PowerSlide turnplates in a flush mount configuration as a component of Fully Integrated Alignment (FIA). New flush mount PowerSlide ...

Hunter's Road Force Elite Features Patented Vision System

by TechShop Staff Writers - 04-28-2016

The new Road Force Elite is Hunter’s fastest diagnostic wheel balancer and performs both a traditional balance and Road Force Measurement in less time than it takes to complete a conventional balanc...

Updates to Hunter's TCX625 Heavy-Duty Tire Changer Reduce Service Speeds

by TechShop Staff Writers - 02-23-2016

The updated TCX625HD from Hunter Engineering features a drop down inner roller to reduce service time by 25% and increase ease-of-use. The pedal-controlled inner roller saves the operator time and ...

Hunter's Quick Check Now Includes Heavy-Duty Battery Clamps

by TechShop Staff Writers - 02-03-2016

Hunter’s battery tester now offers optional heavy-duty clamps. These new battery clamps were designed with increased strength and durability, to hold-up in today’s tough shop environment. H...

Hunter Engineering Showcases New Aligner Console Handheld Remote With Enhanced Features

by TechShop Staff Writers - 01-06-2016

At SEMA 2015, Hunter previewed its enhanced aligner console handheld remote, which features an integrated flashlight and numeric keypad to increase functionality. Handheld remote improvements allow...

Hunter WinAlign Consoles Now Controlled From Any Mobile Device

by TechShop Staff Writers - 12-08-2015

  Hunter’s WinAlign consoles can now be viewed and operated remotely from any mobile device, making the aligner console more convenient and flexible than ever. Using the Splashtop rem...

Hunter’s New Auto34S Features Slim Design, Enhanced Controls

by TechShop Staff Writers - 11-16-2015

Hunter’s new Auto34S features a space saving, functional design that makes this powerful tire changer even easier to use. The ergonomic Auto34S features an air powered, push-button control that o...

Hunter’s Updated Revolution Tire Changer Features Smaller Footprint, Expanded Capabilities

by TechShop Staff Writers - 11-03-2015

  New updates to the Revolution, Hunter’s fully automatic tire changer, have reduced the unit’s footprint by 25% and enhanced ease-of-use. The Revolution’s updated console is now inte...

Extra-Wide Runways Featured On Hunter’s Four-Post Lift

by TechShop Staff Writers - 10-13-2015

Hunter’s L451 four-post lift now features extra-wide 26” runways. The new generation four-post lift family is available in long or standard runway length and open- or closed-front configurations. ...

Hunter’s QuickComp Lathe's Computerized Compensation Adjusts For Lateral Runout

by TechShop Staff Writers - 09-17-2015

Hunter Engineering Company’s QuickComp lathe features a two-way adjustable compensation adaptor that works with Hunter’s patented ProComp computerized compensation to adjust for lateral runout of ...

Hunter’s Quick Tread Now Available In Flush Mount Configuration

by TechShop Staff Writers - 09-08-2015

First previewed for customers at NADA 2015, Hunter Engineering Company announce the Quick Tread drive-over tread depth unit is now available in a flush mount configuration. The flush mount system feat...

Hunter Offers Leverless, Center-Clamp Tire Changer

by TechShop Staff Writers - 06-22-2015

Hunter Engineering Company has introduced the TC3900 tire changer, a high-performance center-clamp tire changer with a bead press arm to assist in mounting difficult assemblies. The TC3900 also fea...

New Enhancements Made to Hunter's Tire Changer

by TechShop Staff Writers - 05-21-2015

Hunter Engineering’s popular TC3700 model center-clamp tire changer has been upgraded to handle today’s tires and wheels even better. A new split roller, bottom bead demount system assists demo...

Hunter Offers New Generation Advanced Tabletop Tire Changers

by TechShop Staff Writers - 05-05-2015

New generation TCX57 tabletop tire changers from Hunter Engineering include several enhanced features for tremendous power and control, according to the company. Building on the TCX575 family, the ...

Faster and Easier Caster Measurements with Hunter’s new WinAlign 14.3 Software

by TechShop Staff Writers - 02-13-2015

Hunter’s new WinAlign 14.3 software reduces the number of steers required to obtain caster measurements, increasing the efficiency and speed of the alignment procedure. Rather than installing the...

Hunter’s Quick Tread Produces Fast, Accurate Tread Depth Readings

by TechShop Staff Writers - 11-25-2014

Hunter Engineering Company announces its new Quick Tread drive-over tread depth system, which uses point cloud technology to automatically measure the tread depth of each tire without a time loss....

New Foot-Pedal-Operated Wheel Lift for Fast and Accurate Wheel Placement

by TechShop Staff Writers - 11-05-2014

Hunter’s new style wheel lift, which is an optional feature on all Hunter wheel balancers, is now operated by a foot pedal, allowing the operator to lift and lower the tire hands free. New wheel ...

Hunter Debuts New HawkEye Elite Alignment

by TechShop Staff Writers - 03-08-2011

Hunter’s HawkEye Elite systems bring Hunter customers unprecedented productivity and other profitable advantages. New and patented QuickGrip adaptors and three-dimensional targets accelerate serv...

Recent News

Hunter Engineering Earns 300th Patent

by TechShop Staff Writers - 12-06-2019

Hunter Engineering is extremely proud to have been granted its 300th US patent this October and to reach this milestone in the undercar equipment industry. Hunter has a team of 75+ mechanical, el...

Hunter Engineering to Participate in SCRS Repairer Driven Education Series at 2019 SEMA Show

by TechShop Staff Writers - 11-01-2019

Hunter Engineering is participating in SCRS Repairer Driven Education: Using Wheel Alignment to Diagnose Suspension (RD22) at the 2019 SEMA Show on Wednesday, Nov. 6, from 3 p.m. to 5 p.m. in Upp...

Hunter Engineering and Bush Specialty Vehicles Partner in Mobile Service at SEMA 2019

by TechShop Staff Writers - 10-31-2019

Hunter Engineering will be hosting Bush Specialty Vehicles in-booth at the 2019 SEMA show to highlight mobile tire service solutions. Anyone interested in learning more about the benefits of mobi...

Hunter Engineering is Now Shipping Quick Tread Edge with Release of WinAlign 16.1

by TechShop Staff Writers - 08-27-2019

Hunter Engineering’s next-generation drive-over tread depth measuring tool, Quick Tread Edge, is now available for order. This announcement comes with Hunter’s latest release of WinAlign 16.1...

Hunter Engineering Releases Difficult Tire and Wheel Fitment Data Trends

by TechShop Staff Writers - 02-28-2019

Hunter Engineering has released data illustrating difficult tire and wheel fitment trends. This data shows a significant shift in growth of difficult tire and wheel assembly fitments throughout th...

Hunter Engineering Now Provides Online Safety System Alignment Information

by TechShop Staff Writers - 02-22-2019

Hunter Engineering Company now provides online safety system alignment information in Hunter’s online business intelligence tool, HunterNet. Safety system reset (or safety system alignment) ...

Hunter Engineering Enhances Connected Equipment Capabilities

by TechShop Staff Writers - 10-09-2018

Hunter Engineering Co. has announced advancements to its online business intelligence tool, HunterNet. First introduced in 2002, HunterNet provides real-time data to shops through equipment re...

Hunter Engineering, AutoVitals Announce New Inspection Integration

by TechShop Staff Writers - 10-02-2018

Hunter Engineering Company and AutoVitals announced a new integration with their vehicle inspection technology. The joint integration empowers service providers to quickly present inspection findi...

Hunter Announces Integration of FrogData Action Analytics to Quick Check Inspection System

by TechShop Staff Writers - 03-21-2018

Hunter Engineering Co. has announced the integration of FrogData Action Analytics into the Quick Check inspection system. According to the company, the new system will help shops to maximize serv...

Hunter Engineering Featured on Performance TV and Velocity

by TechShop Staff Writers - 01-24-2018

  Hunter Engineering is being featured by Masters Entertainment: Perfomance TV and Brenton Productions: Velocity through February 2018. Hunter Engineering showcased 20 new and enhanced product...

Hunter Releases Revolution with WalkAway Operation Video

by TechShop Staff Writers - 12-28-2017

See the Revolution tire changer with WalkAway operation in action with a new video that features autonomous bead breaking and demounting that can be performed without an operator present. Click...

Hunter Engineering Offers Online Self-Study Program

by TechShop Staff Writers - 08-02-2017

Hunter Engineering is now offering Hunter University, a free, comprehensive online self-study program for technicians and industry professionals. “This educational tool is an easy and effecti...

Hunter Engineering Launches Completely Redesigned

by TechShop Staff Writers - 07-10-2017

Hunter Engineering has launched a completely redesigned The new site places even better emphasis on Hunter’s local teams and industry leading products, says the company. One click...

Hunter Quick Tread Console Measures Tire Tread Depth in Seconds

by TechShop Staff Writers - 06-27-2017

Hunter Engineering Co. has released a new console for its Quick Tread inspection technology that automatically measures tire tread depth and captures vehicle identification in seconds. The new, com...

Hunter’s Quick Check and Quick Tread Integrate with BOLT ON TECHNOLOGY

by TechShop Staff Writers - 03-08-2017

Hunter Quick Check and Quick Tread inspection systems now feature integration with Mobile Manager Pro by BOLT ON TECHNOLOGY, a digital multi-point inspection tool featuring color-coded results and...

Hunter Engineering Showcases WinAlign 15.0 Software

by TechShop Staff Writers - 01-30-2017

Hunter Engineering has introduced WinAlign version 15.0, which has many enhancements including support for Safety System Alignment and Quick ID. In addition to a mechanical alignment, manufactu...

Provide Customers with a Diagnostic Health Report from Hunter and Identifix

by TechShop Staff Writers - 12-20-2016

    Hunter Engineering’s Quick Check inspection system is now enhanced with a state-of-the-art Diagnostic Health Report powered by Identifix. Quick Check, along with the Ident...

Hunter’s Quick Check and Quick Tread Fully Integrate with AutoServe1

by TechShop Staff Writers - 12-09-2016

Hunter Engineering’s Quick Check and Quick Tread systems now fully integrate with the AutoServe1 complete vehicle inspection and customer communication system. This allows shops to immediatel...

Hunter Kicks Off Social Media Contest

by TechShop Staff Writers - 08-11-2016

Hunter Engineering is giving away trips to the 2016 SEMA Show as well as the chance to win a SmartWeight Touch wheel balancer as part of a social media contest. Shop owners can enter the contest by...

Hunter Quick Check and Quick Tread Are Integration-Ready

by TechShop Staff Writers - 05-18-2016

  Hunter Engineering announces the Quick Check inspection system and Quick Tread tread depth measurement system are integration-ready. Quick Check instantly sends vehicle inspection data t...

Hunter Quick Check and Quick Tread Now Seamlessly Integrate with AutoPoint

by TechShop Staff Writers - 04-14-2016

Hunter Engineering’s Quick Check and Quick Tread now seamlessly integrate with Solera's AutoPoint. The Hunter inspection results are automatically paired with the complete electronic MultiPoint i...

Choose the Right Tire Changer for Your Shop with Hunter's Decision Guide

by TechShop Staff Writers - 03-11-2016

Hunter has released a new Tire Changer Decision Guide to highlight the benefits and features of different tire changer models. It is important for shops to find a tire changer that is a good match for...

Hunter's Social Media Contest Includes Trips to SEMA 2015

by TechShop Staff Writers - 08-04-2015

Hunter Engineering has launched a new, two-part social media contest that offers trips to SEMA 2015 and the chance to win a free SmartWeight Touch wheel balancer at the show. Before SEMA, two shops...

Hunter’s HawkEye Elite Alignment System Approved by Mercedes-Benz

by TechShop Staff Writers - 03-18-2015

Mercedes-Benz has approved Hunter’s HawkEye Elite alignment system for use in their workshops worldwide. HawkEye Elite uses four precision cameras to measure the position and orientation of targe...

Hunter Releases New Technical and Training-Specific Channel on YouTube

by TechShop Staff Writers - 01-27-2015

Hunter Engineering Company has launched a new technical and training channel on YouTube, called the Hunter Learning Channel. The Hunter Learning Channel features extensive training video playlists ...


Pinnacle Automotive Systems

Phone: 855-839-2626 22703 Racine Street
Robertsdale AL 36567

Recent Products

Pinnacle Automotive Systems Presents Next Generation Heavy Truck Aligner

by TechShop Staff Writers - 12-17-2019

Pinnacle Automotive Systems is proud to present the next generation Jumbo 3D Heavy Truck Aligner (J3DHDA) with the ability to align six axles simultaneously in under three minutes, which can also...

Recent News


Zendex Tool Corp.

Zendex logo
Phone: 203-778-0400Fax: 203-778-0036 4 Larson Drive
Danbury CT 06810

Recent Products

GoJak Air's Design to Replace Hydraulic Floor Jacks

by TechShop Staff Writers - 09-22-2018

The newest member of the Zendex Tool family, GoJak Air, a revolutionary designed lifting system to replace hydraulic floor jacks is powered by compressed air and built for durability. The secret i...

Zendex SUV Jack Accommodates Large Vehicles

by TechShop Staff Writers - 05-31-2018

Gojak SUV Model 7016 Jack is equipped with four heavy-duty G.F. nylon casters and a unique steel roller design that pushes the limits of what can be moved with an auto-positioning dolly. The jack ...

Zendex Tool Offers RakJAK Pneumatic Jack

by TechShop Staff Writers - 05-16-2014

RakJak is compact, powerful and very fast to use. In the body shop, it is an easy and fast way to install pinch weld clamps on the frame machine. In tire and repair shops RakJak’s proven reliability...

New Lifting Solutions Introduced by Zendex Tool Corporation at SEMA

by TechShop Staff Writers - 12-03-2013

Zendex Tool Corporation, the manufacturer of GoJak, introduced its new Gator Power Jaks Lift at SEMA. The Gator is a flat-nosed, low-profile pneumatic jack that is virtually maintenance-free and ...

Recent News


Allpart Supply

Phone: 877-216-0083 3508 Avenue F East
Arlington TX 76011

Recent Products

New Auto Lift Hydraulic Power Unit for Two- and Four-Post Lifts from Allpart Supply

by TechShop Staff Writers - 08-21-2017

Allpart Supply is now offering an advanced-technology power unit product for two- and four-post auto lifts. Auto lift power units provide the hydraulic pressure required for raising and lowering v...

Recent News

Allpart Supply Opens New Wheel Balancing and Automotive Lift Training Center with TIA Certified ATS Training

by TechShop Staff Writers - 03-02-2017

Allpart Supply has launched new, advanced training for wheel balancing and automotive lift industry owners, operators and employees. The first training program at the new Allpart Supply Wheel B...

Allpart Supply Launches New Website

by TechShop Staff Writers - 12-15-2014

The new website for Allpart Supply, a North American supplier of automotive lift parts based in Arlington, Texas, is now live. According to the company, the new site represents the first phase of Allp...


Automotive Lift Institute, Inc.

Phone: 607-756-7775Fax: 607-756-0888 PO Box 85
Cortland NY 13045

Recent Products

ALI’s 2017 Vehicle Lifting Points Guide Now Available

by TechShop Staff Writers - 01-03-2017

The Automotive Lift Institute, Inc. (ALI) announces the availability of the 2017 edition of ALI’s Vehicle Lifting Points For Frame Engaging Lifts. This updated guide is a quick-reference sing...

2015 Vehicle Lifting Points Guide Now Available

by TechShop Staff Writers - 01-21-2015

The Automotive Lift Institute, Inc. (ALI) announces the availability of the 2015 edition of ALI’s “Vehicle Lifting Points for Frame Engaging Lifts.” This updated guide is a quick-reference si...

Recent News

Automotive Lift Institute Names Interim Board Chairman

by TechShop Staff Writers - 05-22-2019

Stet Schanze of Gray Manufacturing Company (St. Joseph, Missouri) will serve as chairman of the Automotive Lift Institute Board of Directors effective May 22, following the retirement of Jerry Le...

Keep Lift Safety in View with New Automotive Lift Institute Safety Tips Poster

by TechShop Staff Writers - 09-27-2017

The Automotive Lift Institute (ALI) has updated and expanded its popular Automotive Lift Safety Tips Card and has created an all-new Safety Tips Poster to make it even easier to keep lift safety i...

International Building Code Reinforces Importance of Only Installing Certified Lifts

by TechShop Staff Writers - 03-31-2016

  New commentary in the latest edition of the International Building Code (IBC), the building code in use or adopted by all 50 U.S. states, clarifies that all installed vehicle lifts must conf...

ALI Lowers Price of Lifting It Right Online Lift Safety Training Course

by TechShop Staff Writers - 02-08-2016

  The Automotive Lift Institute (ALI) has lowered the price of its Lifting It Right online lift safety training course from $29 to $24 per person. The interactive course, hosted by NASCAR ...

ALI's 2016 Vehicle Lifting Points Guide Available

by TechShop Staff Writers - 01-13-2016

The Automotive Lift Institute, Inc. (ALI) announces the availability of the 2016 edition of ALI’s Vehicle Lifting Points for Frame Engaging Lifts. This updated guide is a quick-reference single-s...

More Than 70 Inspectors Perform 833 Lift Inspections During 2015 'Five Days To Victory' Event

by TechShop Staff Writers - 11-23-2015

More than 70 people worked toward Automotive Lift Institute (ALI) Lift Inspector Certification during the “Five Days to Victory” event held from Nov. 1-5 on the Cheyenne Campus of the College of S...

ALI Lift Inspector Certification Program Accredited By ANSI

by TechShop Staff Writers - 10-06-2015

The Automotive Lift Institute (ALI) Lift Inspector Certification Program has earned accreditation from the American National Standards Institute (ANSI), providing assurance that the program conforms t...

Earn ALI Lift Inspector Certification at ‘Five Days to Victory’

by TechShop Staff Writers - 07-07-2015

Participants in the Automotive Lift Institute (ALI) Lift Inspector Certification Program can fast-track their certification by attending the “Five Days to Victory” training, testing and practi...

Easily Find All You Ever Wanted To Know About Vehicle Lifts On New Automotive Lift Institute (ALI) Website

by TechShop Staff Writers - 06-01-2015

The Automotive Lift Institute (ALI) has launched a completely redesigned website at The new site brings together information lift buyers, owners and users need, including: • The...

Notice: Annual Lift Inspection Labels Stolen

by TechShop Staff Writers - 05-04-2015

The Automotive Lift Institute, Inc. (ALI), an ANSI accredited product certification body, has announced that 200 of its Annual Inspection labels were stolen when the vehicle of an ALI Certified Li...


Automotive Service Equipment

Phone: 800-229-6218Fax: 419-831-0245 379 Cardinal Circle
Torrington CT 06790

Recent Products

Recent News


Challenger Lifts

Phone: 800-648-5438Fax: 502-625-0711 200 Cabel Street
Louisville KY 40206

Recent Products

Express Service Pad for Challenger In-Ground Lifts

by TechShop Staff Writers - 07-08-2019

Challenger Lifts has redesigned our in-ground express service lift to maximize quick vehicle spotting in express bays. The signature EV1020 in-ground lift series will now be available with a 9,00...

Challenger 4-Post Series Lifts

by TechShop Staff Writers - 06-19-2019

Challenger’s 4015 4-post series lifts have a 15,000 lb. capacity and are available in several configurations. The company offers general service flat deck or dedicated alignment capabilities. C...

Recent News


Chief Automotive Technologies

Phone: 800-445-9262Fax: 866-275-0173 996 Industrial Drive
Madison IN 47250

Recent Products

Chief Automotive Live Mapping System with Galileo Laser Scanner

by TechShop Staff Writers - 05-28-2018

Chief introduced the new Meridian Live Mapping System that’s uses new Galileo multi-point laser scanner to provide real-time, full-picture measurements of collision-damaged vehicles. Chief’s M...

Chief Globaljig Is Versatile Bench for Most Common Structural Work

by TechShop Staff Writers - 07-06-2017

Globaljig Presented by Chief’s Koala bench can handle most of the structural work, including the center section holding, required to repair the latest generation of vehicles. The Koala struct...

Americans Love Their Trucks: Is Your Shop Equipped to Repair Them?

by TechShop Staff Writers - 10-19-2016

To repair frame damage to light-duty trucks, you need a frame rack. The American love affair with trucks continues, with sales of pickups outpacing declining car sales month after month. Through ...

Chief Extractor Helps Protect Technicians From Weld Fume Particulates

by TechShop Staff Writers - 11-24-2015

Chief Automotive Technologies introduces a heavy-duty weld fume extractor, which collects weld fumes at their source, protecting technicians against breathing harmful airborne particulates. The Chi...

Recent News



Phone: 615-641-7533Fax: 615-641-6069 1601J P Hennessy Dr
La Vergne TN 37086

Recent Products

Coats Direct Drive Wheel Balancer

by TechShop Staff Writers - 05-28-2019

Coats’ 1600-3D Direct Drive Wheel Balancer was designed to deliver a performance balance for your customers. Powered by Direct Drive ProBalance Technology, the balancer features a touchscreen w...

Coats RC-55 Rim Clamp Tire Changer Built for High Speed Service

by TechShop Staff Writers - 05-09-2018

The Coats RC-55 Rim Clamp Tire Changer is built for today's high-speed, general service repair shops. The RC-55 features the RC-Robo-Arm, which allows technicians to efficiently change difficult w...

Coats Introduces New Automotive Lift Line

by TechShop Staff Writers - 10-02-2017

Hennessy Industries Coats brand is offering a new comprehensive automotive lift line. The new line ranges from commercial light- and medium-duty lifts, all the way to heavy-duty and mobile colu...

Coats Offers Direct Drive Series of Wheel Balancers

by TechShop Staff Writers - 09-12-2017

The Direct Drive Series of Coats wheel balancers offers an exclusive set of easy-to-use balancing features designed to get the job done right the first time, every time. The Stop & Lock fea...

Coats Rim Clamp Tire Changer Provides Efficient Operation

by TechShop Staff Writers - 12-14-2015

The new Coats RC Series Rim Clamp tire changers are built upon the same time-honored traditions Coats has brought its customers over the years, according to the company. The RC Series machines repr...

Coats GTS Series Tire Changers Grow With Your Shop's Needs

by TechShop Staff Writers - 09-16-2015

Coats reliability and durability meets tiltback in the Coats GTS Series tire changers. These machines are capable of servicing tires from 6 to 24 inches.  The GTS Series will feature three differe...

Coats’ Double-Sided Collets Capable of Fitting Most Car and Light Truck Wheels

by TechShop Staff Writers - 03-02-2015

As opposed to standard cones, the design provides technicians with a durable and precise mounting method, replicating the mounting of the wheel on the vehicle. When back coning, the shallow depth a...

Coats Wheel Balancers Combine Accuracy and Durability

by TechShop Staff Writers - 12-23-2014

The Coats 1150-2D wheel balancers combine the accuracy and durability of Coats’ Direct Drive system with an exclusive set of easy-to-use balancing features. The 1150-2D offers a redesigned user i...

Reduce Risk of Tire Damage with Coats’ ProGuard Plus

by TechShop Staff Writers - 10-07-2014

The Coats ProGuard Plus Leverless tire changer, developed as a fast, easy-to-use tire changer specifically engineered for oversized, run-flat, and low profile applications, features a revolutionary de...

Recent News


Cornwell Quality Tools

Phone: 800-321-8356Fax: 330-336-3337 667 Seville Road
Wadsworth OH 44281

Recent Products

Cornwell Bolsters Platinum Series Toolbox Line

by TechShop Staff Writers - 09-30-2019

Several new paint and trim color combinations have been added to the Cornwell Quality Tools Platinum Series line of toolboxes. Introduced in early 2019, the Platinum Series tool boxes have been c...

Cornwell Quality Tools Platinum 84 in. Triple Bank Cabinet

by TechShop Staff Writers - 04-26-2019

Cornwell Quality Tools’ Platinum 84 in. Triple Bank Cabinet features a cage frame construction and six 6 in. x 2 in. spring-loaded heavy-duty casters. Drawers are supported by 260 lb. capacity ...

Cornwell Tools Automotive DMM with Rapid Auto Range

by TechShop Staff Writers - 03-25-2019

Cornwell Tools’ new product, CBPDM200 Automotive DMM with Rapid Auto Range incorporates the new function Rapid Auto Range. This DMM features True RMS accuracy and is designed for advanced autom...

Cornwell: Platinum Series Tool Box Line

by TechShop Staff Writers - 02-18-2019

Cornwell Quality Tools has introduced a new line of high-end tool boxes, called the Platinum series. Currently rolling out and available now is an 84 in. double bank cabinet. In development and sche...

Complete Starting and Charging System Analysis from Cornwell Quality Tools

by TechShop Staff Writers - 05-02-2017

Cornwell Tools introduces the ESC725 Digital Battery and Electrical System Analyzer, which performs a complete starting and charging system analysis along with a diagnosis of battery condition. ...

Cornwell Tools Digital Battery & Electrical System Analyzer with Printer

by TechShop Staff Writers - 02-08-2017

Cornwell Tools introduces the ESC726 Digital Battery & Electrical System Analyzer with printer. ESC726 performs a complete starting and charging system analysis along with a diagnosis of ba...

Cornwell Tools' Tool Cart Keeps Tools Where You Need Them

by TechShop Staff Writers - 10-03-2016

Cornwell QualityTools’ CTBMM100BL - Pro Series Cart features four bumpers that help prevent dents and dings; an exclusive push handle; four 5” x 2” casters, two locking and two non-locking; and ...

Cornwell Tools Offers Metric Stubby Flex Ratcheting Box Wrench Set

by TechShop Staff Writers - 06-15-2015

Cornwell Tools offers its 5-Piece Metric Stubby Flex Ratcheting Box Wrench Set (CRWSF5MSA). The multi-drive 12-point design can be used on 6-point, 12-point, square, Torx, spline and even rounded f...

Recent News



Phone: 352-754-1117Fax: 352-754-4508 15270 Flight Path Drive
Brooksville FL 34604

Recent Products

ESCO Trolley Jack Features Redesigned Handle

by TechShop Staff Writers - 01-22-2020

ESCO, a leading worldwide manufacturer and supplier of tire changing tools and accessories, announces the redevelopment to the handle on its bestselling 3-ton trolley jack. After lengthy evaluati...

ESCO Introduces Pro Series Trolley Jacks

by TechShop Staff Writers - 08-14-2017

  ESCO (Equipment Supply Company) announced its new Pro Series Trolley Jacks. Available in 2-ton (90520) and 3-ton (90521) lifting capacities, these new jacks are loaded with unique safety...

ESCO Offers Tire Service Equipment And Accessories Catalog

by TechShop Staff Writers - 09-25-2014

ESCO announces the release of its 30th anniversary catalog, available now in digital format on its website at This newest catalog released by ESCO includes an almost 100% increase to its...

Recent News


Forward Lift, a brand of Vehicle Service Group

Phone: 800-423-1722Phone: 812-273-7325Fax: 812-273-7329 996 Industrial Drive
Madison IN 47250

Recent Products

Forward Lift Low Profile Scissor Lift

by TechShop Staff Writers - 06-25-2019

The Forward FS77 scissor lift is an engineered low-profile small package powerhouse. Standing 4-1/8-in. tall when fully lowered and using less than 44 sq. ft. of space, this lift can be worked ar...

Forward Lift's New Two-Post Lift Handles Trucks, Vans and Small Buses with Ease

by TechShop Staff Writers - 12-13-2017

Forward Lift’s new DP15 two-post lift is a robust lift for servicing cars, trucks, vans and small buses weighing up to 15,000 lbs. Low-profile, two-stage arms with lightweight adapters provid...

New Forward Lift DP18 Two-Post Lift Combines Versatility and Durability to Service Wide Range of Vehicles

by TechShop Staff Writers - 11-22-2017

Forward Lift's new DP18 two-post lift provides shops the versatility to service a wide range of vehicles, from cars to medium-duty trucks and buses weighing up to 18,000 pounds. Forward Lift's ne...

Two-Post Lift from Forward Lift Provides Cost-Effective Choice for Servicing Cars, Pickups and Vans

by TechShop Staff Writers - 11-30-2016

  Forward Lift’s new I12PRO two-post lift is a competitively priced lift for servicing cars, pickup trucks and vans. The I12PRO has three-stage arms equipped with low-profile 4.75” ...

Service a Wide Range of Vehicles with Low-Profile Scissor Lift from Forward Lift

by TechShop Staff Writers - 08-08-2016

Forward Lift’s new FS77 scissor lift is packed with advanced efficiency features that make it a reliable lift for smaller service bays and quick-service tasks, says the company. Third-party test...

New Forward Lift F10 Two-Post Lift Combines Versatility with Economy

by TechShop Staff Writers - 07-18-2016

The new Forward Lift F10 10,000 lb. capacity two-post lift gives shop owners a versatile two-post lift designed to service a wide variety of vehicles for a low purchase price. The F10 two-post li...

Adaptable Forward Lift I10 Two-Post Lift Provides Best Lifting Setup for a Variety of Vehicles

by TechShop Staff Writers - 03-12-2015

Versatile equipment that works with many vehicles can help independent repair shops get the most profit out of each work bay. That’s why the Forward Lift I10 10,000-lb. capacity two-post lift comes ...

Recent News


Greg Smith Equipment Sales Inc.

Phone: 317-542-0662Phone: 800-262-1950Fax: 317-542-1448
Contact: John Temple
5800 Massachusetts Ave.
Indianapolis IN 46218

Recent Products

Recent News


Herkules Equipment Corp.

Phone: 248-960-7100Fax: 248-960-7109
Contact: Kevin Prost
2760 Ridgeway Ct.
Walled Lake MI 48390

Recent Products

Two New Lifts Added to Herkules BossLifts Line

by TechShop Staff Writers - 03-23-2016

Herkules Equipment Corporation has two new vehicle lifts joining the company’s BossLifts line this spring. The BossLift VLA06 provides pneumatic lifting power, while the BossLift VLH01 is the low-pr...

Recent News


Hydra-Lift Industries, Ltd.

Phone: 800-387-5718Fax: 604-560-2235 #132-15028-32nd Ave
Surrey BC V4P 1A3

Recent Products

Recent News


JMC Automotive Equipment

Phone: 877-298-7730Fax: 88-318-5395 1521 Concord Pike #303
Wilmington DE 19803

Recent Products

Recent News


Mac Tools

Phone: 800-MAC-TOOLS 505 N. Cleveland Ave.
Westerville OH 43082

Recent Products

Mac Tools Offers 6 New Impact Wrenches

by TechShop Staff Writers - 05-01-2018

Mac Tools added six new tools to its air impact family. Four high-performance impact wrenches were added with two standard air impact wrenches, both consisting of 1/2” and 3/8” drive sizes. The ...

Advanced Digital Multimeter from Mac Tools

by TechShop Staff Writers - 03-12-2018

Mac Tools offers its Advanced Digital Multimeter (EM823), which offers Bluetooth and USB communication, battery and charging system analysis and advanced measure for sensor and actuators. The h...

Mac Tools Jacket: Stay Warm with the Push of a Button

by TechShop Staff Writers - 02-07-2018

  The 20V MAX* Soft-Shell Heated Jacket from Mac Tools features a durable wind- and water-resistant shell; four heat zones: neck, chest, waist and middle-back; and an LED controller offers thr...

Variety of Pliers Sets Available from Mac Tools

by TechShop Staff Writers - 01-08-2018

Mac Tools offers a variety of pliers sets including: 5-PC. Next Generation Pliers Set (FPS5) Patented rack and pinion design encourages slot engagement and reduces blocking points Large...

Mac Tools .401" Shank Long and Short Barrel Air Hammers

by TechShop Staff Writers - 12-05-2017

Mac Tools’ .401” Shank Long and Short Barrel Air Hammers are for use in separating ball joints and tie-rod ends, breaking loose frozen bolts, removing bushings in control arms, cutting applicati...

Store Tools Right Where You Need Them with Mac Tools Utility Carts

by TechShop Staff Writers - 11-29-2017

The MB198UC / MB198UCCOMBO Utility Carts from Mac Tools feature a sliding top lid with stainless steel top surfaces and a rear grommet for power access. The carts are available in three-drawer (MB1...

Mac Tools New Macsimizer Workstation for Efficient Tool Storage

by TechShop Staff Writers - 07-17-2017

The new Mac Tools mid-size MB5930 Macsimizer Workstation features the benefits of the company’s 30” depth unit, while its 59” width is more conducive to some work spaces. Two extra-wide t...

Mac Tools Introduces New Cordless Brushless Impact Wrench and Impact Driver

by TechShop Staff Writers - 06-05-2017

As part of the 2017 Mac Tools Tool Fair, Mac Tools announces the launch of its new 20V MAX* ¼” Brushless Impact Driver (MCF886) and 20V MAX* ⅜” Brushless Impact Wrench (MCF891). These new tools...

Mac Tools Offers R134a Semi-Auto A/C Service

by TechShop Staff Writers - 05-02-2017

Recover, vacuum and charge A/C systems with the Mac Tools ACR220M R134A Semi-Auto A/C Service Machine. Its longer 12’ hoses allow more versatility when raising vehicles and working on large truck...

Mac Tools Introduces Pro Eye Light

by TechShop Staff Writers - 05-01-2017

The Pro Eye Light (SPL1500M) from Mac Tools is an exclusive design rechargeable area light. It features three power settings: low/medium/high, offering 500/1000/1500 lumens. It features a ru...

Mac Tools New Tool Storage Selections

by TechShop Staff Writers - 04-13-2017

At the recent 2017 Mac Tools Tool Fair, the company introduced new tool storage options. The MB1004-STEALTH 10-Drawer Workstation features 5” and 3” Xtra-Wide top drawers for convenient acc...

Mac Tools Announces New Reversible Ratcheting Wrench Sets

by TechShop Staff Writers - 04-03-2017

  Mac Tools offers two 12-piece Ratcheting Wrench Sets – one SAE (SRWO212PTB) and one metric (SRWMO212PTB), as well as a six-piece Metric Large Reverse Ratchet Wrench Set (SRWMO26PT). ...

Mac Tools’ MDT 10 Diagnostic Tools Delivers Enhanced Performance Boost for Techs

by TechShop Staff Writers - 01-03-2017

The Mac Tools MDT 10 is an ergonomically designed vehicle diagnostic tool built specifically for technicians. The MDT 10 features best-in-class coverage for more than 25,000 vehicle systems, and ca...

Mac Tools Offers Hi Vis Combination Screwdriver Set

by TechShop Staff Writers - 06-01-2016

The six-piece Mac-Grip Combination Screwdriver Set from Mac Tools features a 360° ergonomic textured grip for maximum comfort. The tools feature “tip ID” for easy recognition of tip type when ...

Mac Tools Cordless Tools Let You Break Free

by TechShop Staff Writers - 01-22-2016

Built from glass-filled nylon and other quality materials, Mac Tools’ cordless tools, including impact wrenches, ratchets and drills, are built to withstand harsh automotive fluids in a shop en...

Mac Tools Delivers Next Generation Of Die Grinders

by TechShop Staff Writers - 12-16-2015

Mac Tools introduces the next generation of pneumatic die grinders. The Die Grinder line was designed for the professional automotive technician with a powerful design that provides optimal comfor...

Make A Big Impact With Mac Tools New 1" Impact Tools

by TechShop Staff Writers - 10-28-2015

Mac Tools presents new 1" impact tools that are available in inline and pistol configurations. The new impact tools provide excellent power, while also being lightweight for less fatigue when working ...

Raise Awareness With Mac Tools New Breast Cancer Awareness Tool Box

by TechShop Staff Writers - 10-06-2015

Mac Tools presents the MB1000A-BCA 2015 Breast Cancer Awareness Tool Box. Mac Tools is a proud supporter of The Stefanie Spielman Fund for Breast Cancer Research and the Breast Cancer Society of Canad...

Mac Tools Offers 3 New Cordless Impacts

by TechShop Staff Writers - 09-04-2015

Mac Tools presents three new and innovative cordless impacts that are available in several variations to meet a technician’s impact tool needs. The new impacts offer reliable power, comfort for more...

Get Full Access with Mac Tools’ Line of Axis Ratchets

by TechShop Staff Writers - 07-29-2015

Mac Tools presents a line of Axis ratchets designed to allow full access for every user. The new line features a compact pear head design and a 4° arc swing that provides users ultimate access in eve...

Mac Tools Torque Sockets Remove Fasteners Rounded Up to 85%

by TechShop Staff Writers - 06-18-2015

Precision Torque performance from Mac Tools has been expanded to include a line of hand and impact sockets that won’t slip on fasteners rounded up to 85%. The unique inner geometry of the 6-p...

Mac Tools' Mentor Touch Scout Provides Diagnostics at Your Fingertips

by TechShop Staff Writers - 03-09-2015

Mac Tools’ Mentor Touch Scout is a professional scan tool built into a durable Android tablet with a 7” capacitive, high-resolution touch-screen display. It offers full access to Google Play an...

Mac Tools Is Wrenching for a Cure

by TechShop Staff Writers - 10-22-2014

In support of Breast Cancer Awareness month, Mac Tools is featuring a variety of Wrenching For A Cure products available for purchase in the Flyer 11 through Nov. 2. Featured pink products include clo...

Break Free With the Mac Tools Line of Cordless Tools

by TechShop Staff Writers - 08-13-2014

Mac Tools’ cordless tools includes impact wrenches, ratchets and drills that are designed and built tough for automotive technicians. Built from glass-filled nylon (GFN) and other quality materials,...

Illuminate Your Work Space with Lights from Mac Tools

by TechShop Staff Writers - 07-23-2014

Mac Tools presents a new line of corded shop lights for professional technicians that feature a higher wattage of light output to illuminate the work area brighter than normal work lights. Availabl...

Recent News

Mac Tools Ranks in the Top 10 Fastest Growing Franchises

by TechShop Staff Writers - 03-09-2018

Entrepreneur magazine has ranked Mac Tools the No. 8 Fastest-Growing Franchise, nationwide, for 2018. Over 1,000 companies applied for the 39th annual Franchise 500 ranking, making this year th...

Mac Tools Welcomes New President Ken Hartman

by TechShop Staff Writers - 12-19-2017

Mac Tools has announced Ken Hartman as president, Mac Tools, North America. Hartman and his leadership team will advance Mac Tools’ focus on innovation and Made in the USA with Global Materia...

Mac Tools Named Top New Franchise In 2015 By

by TechShop Staff Writers - 12-09-2015

Mac Tools, an international company with distributors and franchisees in the United States, Europe, Canada and Japan, has been named the No. 1 Top New Franchise for the second straight year by Entrepr...

Race For The Cure - Mac Tools New Breast Cancer Awareness Dragster

by TechShop Staff Writers - 10-05-2015

Mac Tools unveils the newly wrapped Mac Tools Top Fuel Dragster to bring awareness to Breast Cancer. Top Fuel driver, Doug Kalitta and crew will be wearing matching Breast Cancer Awareness crew shirts...

Mac Tools Donates to Breast Cancer Research Fund through Sales of ‘Wrenching for a Cure’ Products

by TechShop Staff Writers - 04-28-2015

Mac Tools has made donations of more than $30,000 to The Stefanie Spielman Fund for Breast Cancer Research and over $4,000 to The Breast Cancer Society of Canada. Mac Tools would like to thank ...


Connect with us