Diesel Injector Cleaner by Prolong Super Lubricants Cleans Injector Tips and Intake Valves

Diesel Injector Cleaner by Prolong Super Lubricants Cleans Injector Tips and Intake Valves

Prolong Super Lubricants offers Fast Fuel Diesel Injector Cleaner designed to improve fuel injector and intake valve performance while increasing fuel economy.

Prolong Super Lubricants offers Fast Fuel Diesel
Injector Cleaner designed to improve fuel injector and intake valve performance
while increasing fuel economy.  

Prolong’s Diesel Injector Cleaner is formulated to use
in TDI (Turbo Diesel Injection) and TDCI (Turbo Diesel Common Rail Injection)
engines to remove gum, deposits and sludge build-up from fuel injectors,
restoring a full spray pattern and allowing for quick starts. Periodic
treatment of the Prolong Diesel Injector Cleaner allows for smooth, efficient
vehicle operation.  

In addition, the Diesel Injector Cleaner helps
maintain diesel emission compliance and protect against corrosion and premature
fuel injector and intake valve malfunction. According to the company, it is
compatible with all grades of diesel fuel and should be used when the vehicle
starts misfiring, running rough or getting poor gas mileage. To use, simply
pour Diesel Fuel Treatment into the vehicle’s empty fuel tank. One 12 oz.
bottle treats up to 20 gallons of diesel fuel. 

Prolong Super Lubricants, a brand of GoldenWest Lubricants, Inc., produces
a wide range of chemicals and car care products, including engine, fuel and
transmission additives; chassis and wheel lubricants; rust, vinyl and leather
protectants; and waxes. Its Anti-Friction Metal Treatment (AFMT) advanced
technology treats and modifies the surface of metal to reduce metal wear, heat
and friction. 

For more information, visit www.prolong.com, or contact
Prolong at 1937 Mount Vernon Ave., Pomona, CA 91768; phone: 800-540-LUBE
(5823); fax: 800-966-LUBE (5823).

You May Also Like

Lisle Low Profile Fuel Line Disconnect

Designed for Ford vehicles with limited clearance between fuel line and high-pressure pump.

Designed for 5/16" and 3/8" fuel lines found in 2010 and newer Ford vehicles with 1.6L, 2.0L & 3.5 GTDI, and 6.2L Boss engines, this low profile fuel line disconnect tool is designed to work better than two-piece disconnect tools.

The low profile fuel line disconnect may work on other 5/16" and 3/8" applications, and the double ended tool is designed to fit the limited clearance between the fuel line and high-pressure fuel pump. Made from durable, flexible acetal.

Dent Fix Soft-Shock Mallet DF-SM76 Reduces Damage

Apply firm precision taps for dashboards, head- or tail-light assemblies, windshield placement, plastic bumper covers, interior or exterior decorative trim, emblems, and GPR/PDR work.

AMD-035 Membrane Dryer Provides Ultra-Clean & Ultra Dry Air

The dryer has a flow rating of 35 SCFM and maximum working pressures of 150 PSI.

New Rislone ‘DEF Crystal Clean’ Clears P20EE Codes

New Rislone DEF Crystal Clean Diesel DEF & SCR Emissions System Cleaner scrubs away crystal contaminants from the selective catalytic reduction (SCR) systems of diesel cars, trucks, and SUVs to cost-effectively restore power and performance.

New ProMAXX Diesel Fuel Injector Seal Puller/Saver ProKits

Ford Power Stroke 6.7L & GM Duramax 6.6L ProKits easily remove compression seals and shorten repair times

Other Posts

AMSOIL Introduces New OE 0W-40 100% Synthetic Motor Oil

The new OE 0W-40 is primarily for newer RAM HD trucks equipped with the 6.4-liter Hemi engine.

BendPak Full-Rise Scissor Lift Delivers Two-Post Performance

SP-7XE scissor lift lays flat and raises a vehicle six feet with an open center below.

CTA Tools Debuts Chrysler Cam Phaser Master Set – VVT & VVL

Applications included are for 2011-2022 Chrysler, Dodge & Jeep models.

Mayhew Introduces New 14-Piece Micro Hand Tool Set

This new set is a compilation of all the current micro line products from Mayhew; including pry bars, picks, hooks and screwdrivers.