FJC’s Kwik Seal Stop Leak (P/N 9165) seals most leaks in all metal and rubber components, and creates a permanent seal.
Kwik Seal Stop Leak will not damage A/C recovery/recycle equipment.
Stops leaks in:
• Condensers
• Evaporators
• Hose connections
• Gaskets
• O-rings
The easy-to-install 4 oz. aerosol can includes an easy-to-install hose — no other tools are needed. For use in R-134a A/C systems only.
For more information, visit www.fjcinc.com.
Designed for Ford vehicles with limited clearance between fuel line and high-pressure pump.
Designed for 5/16" and 3/8" fuel lines found in 2010 and newer Ford vehicles with 1.6L, 2.0L & 3.5 GTDI, and 6.2L Boss engines, this low profile fuel line disconnect tool is designed to work better than two-piece disconnect tools.
The low profile fuel line disconnect may work on other 5/16" and 3/8" applications, and the double ended tool is designed to fit the limited clearance between the fuel line and high-pressure fuel pump. Made from durable, flexible acetal.
Apply firm precision taps for dashboards, head- or tail-light assemblies, windshield placement, plastic bumper covers, interior or exterior decorative trim, emblems, and GPR/PDR work.
The dryer has a flow rating of 35 SCFM and maximum working pressures of 150 PSI.
New Rislone DEF Crystal Clean Diesel DEF & SCR Emissions System Cleaner scrubs away crystal contaminants from the selective catalytic reduction (SCR) systems of diesel cars, trucks, and SUVs to cost-effectively restore power and performance.
Ford Power Stroke 6.7L & GM Duramax 6.6L ProKits easily remove compression seals and shorten repair times
The new OE 0W-40 is primarily for newer RAM HD trucks equipped with the 6.4-liter Hemi engine.
SP-7XE scissor lift lays flat and raises a vehicle six feet with an open center below.
Applications included are for 2011-2022 Chrysler, Dodge & Jeep models.
This new set is a compilation of all the current micro line products from Mayhew; including pry bars, picks, hooks and screwdrivers.
