JohnDow Adds SMART Cabinet To Its Smart Storage Solutions Line

JohnDow Adds SMART Cabinet To Its Smart Storage Solutions Line

JohnDow Industries (JDI) has added a second major product to its expanding Smart Storage Solutions product line, following up on the introduction this past December of the SMART Wall parts and tool storage solution.

Now, JDI is adding the SMART Cabinet, a new concept for hose reel storage that makes the installation and servicing of reels fast and easy, the company says. Reels are mounted in the cabinet at the floor level instead of overhead. Each SMART Cabinet tower holds up to eight different reels and can be used with a variety of reel manufacturers.

Features include:
• All-steel construction
• Fully assembled
• Holds up to eight reels, such as:
— Air
— Electrical
— Grease
— Coolant
— Oils
— Water

• Multiple configurations for hose reels
• Durable powder-coat finish (black)
• Spill-preventing drip pans
• Easy installation
• Easy access for maintenance and service
• Measures 28 inches W x 20 inches D x 80 inches H
• Weighs 120 lbs.

One of JDI’s major objectives for 2014 and beyond include the addition of new products and new product lines to its existing offerings with an ongoing commitment to further diversify the JohnDow family of products. The SMART Cabinet fits very well into this strategy.

You May Also Like

AMD-035 Membrane Dryer Provides Ultra-Clean & Ultra Dry Air

The dryer has a flow rating of 35 SCFM and maximum working pressures of 150 PSI.

According to Walmec North America, the WNA AMD-035 Membrane dryer has a 4-stage pre-filtration that is critical to the longevity and function of the membrane dryer.

The first and second stage filters remove moisture, liquids, dust, rust, scale, and other contaminants to 5 microns.  An automatic float drain under the second stage filter opens and expels all collected liquids whenever an ounce or more is present.  It is fully automatic with no continuous air loss.  The third and fourth stages remove any remaining particles down to .01 microns as well as absorbing any remaining moisture or oil vapors.  The Membrane Dryer lowers the humidity level by venting it harmlessly into the surrounding atmosphere.  A flexible input hose assembly eliminates the hazards of damage from vibrations in piped compressed air systems and allows the Membrane Dryer itself, to be installed in any position. 

BendPak Full-Rise Scissor Lift Delivers Two-Post Performance

SP-7XE scissor lift lays flat and raises a vehicle six feet with an open center below.

BendPak to Debut Eight-Armed Car Lift Concept at NADA

Octa-Flex improves technician productivity, convenience and ergonomics, according to BendPak.

Matco’s New Ghost Cart: Where Tools and Style Spookily Align

Haunt your shop with efficiency: Matco’s 2023 Ghost Cart is sleek and functional.

Matco Ghost Cart tool storage
New Cool Boss CB-26: Plug In and Chill Out 

Portable evaporative cooler drops temperature up to 26 degrees at work or play.

Other Posts

New ProMAXX Diesel Fuel Injector Seal Puller/Saver ProKits

Ford Power Stroke 6.7L & GM Duramax 6.6L ProKits easily remove compression seals and shorten repair times

Mayhew Introduces New 14-Piece Micro Hand Tool Set

This new set is a compilation of all the current micro line products from Mayhew; including pry bars, picks, hooks and screwdrivers.

New Small Stud Extractor Now Available from Mayhew Tools

This new stud extractor, 1/4″ drive, allows for stud and bolt removal from tighter spaces with a wide option of driver abilities for job versatility.

TPMS: Are Retrofits in Your Future?

Installing a retrofit kit can be performed with the tools and equipment you already own and use on a daily basis.

Tire tread