Ready-To-Install Struts: Saving Time & Adding Profits
It should come as no shock that preassembled, ready-to-install struts have been a huge hit lately, not only with do-it-yourselfers, but even more so with professional technicians. The pros like them because they are much easier, faster and more profitable to install than ordinary struts. They don’t need a spring compressor to disassemble and reassemble
Better Breathing: EGR Improvements
So Why Do We Have EGR? By Glen Beanard, technical contributor The Exhaust Gas Recirculation (EGR) system was created in the early 1970s for the same No. 1 ranking motivation that drives every other engine management system design — to reduce emissions. The EGR valve targets one specific pollutant, oxides of nitrogen (NOx). Under normal
Alignment Equipment
From the brake pad to the shock absorber, every product that you come in contact with at a shop has a history that goes back at least 75 years. We will look at different product categories and track the innovations that have shaped these products and the future for these segments. Alignment Retrospective In the
Under Pressure: Maintaining Ford’s Electronic Returnless Fuel System
By Glen Beanard, Technical Contributor Here we go again. A simple electric pump pushing fuel up to the engine, with its pressure being controlled by a little valve, and returning the unused fuel to the tank was not good enough. Now, we need to make that all fancy by adding a new controller, adding a