Directions: Jet-Setting Across the Country
On a visit to Akron, OH, you may get a glimpse of the leisurely traveling, faint-humming Goodyear blimp hovering overhead as it floats gracefully over the Rubber City. And just miles away from where the Goodyear blimp rests, you may hear the thundering roar of a jet-powered turbine screaming to life. Yes, that’s right, the
Who’s at Fault?…Top 10 Domestic Diagnostic Codes & Fixes
A Check Engine Light that’s illuminated is always a sign that something is wrong. But what? You usually can’t tell until you plug in a code reader or scan tool and read out the code(s) that have turned on the light. At least then you have a starting point for further diagnosis. Some people think
Foreign Affairs: VW P Codes — … Putting Out The MIL
After 10-plus years of dealing with OBD II, it should be apparent that we are on a learning curve that probably has no end. Almost daily we have a Volkswagen model come into the shop with a check engine light on, or a “state OBD II failure” form. Although we have the latest scanner software
Carley’s Corner: No Time for Training? Read This
I may not fix cars for a living anymore, but I do make my living writing about auto repair. For me, training is absolutely essential to keep my knowledge up-to-date. So I can’t imagine how anybody who spends the better part of his or her day hunched over a fender can get by without it.
Point Of View: ‘Upon My Honor…’
In our June issue of TechShop, I asked our readers, “What’s your motto?” I told you my proposed motto for the Universal Independent Shop Owner and Professional Technician: “I will do my best to be honest and fair, friendly and helpful, considerate and caring, responsible for what I say and do, and to respect myself
Rotary Improves SmartLift Inground Lifts
Rotary Lift has improved its twin-post SmartLift inground lifts to offer technicians smoother working conditions and greater efficiency. SmartLift inground lifts are installed a quarter inch above the shop floor to help prevent water from infiltrating the lift housing. This installation had previously created a quarter inch bump that made it inconvenient for technicians to roll equipment, such as jacks or carts, over the lift.
National Cylinder Head Specializes in Rebuilt Cylinder Heads for Import and Domestic Vehicles
National Cylinder Head specializes in completely rebuilt cylinder heads made of aluminum and cast iron. Cylinder heads are available in both import and domestic, for only $199. Most heads are complete with cams, lifters, rocker arms, valves and springs.
Toyota Racing Development Puts Inefficient Storage in Rear View Thanks to Lista International
A finely tuned engine is what the people at Toyota Racing Development (TRD) strive for. It’s also how they’d like their entire operation to run – smoothly and efficiently with maximum performance and no wasted energy or time. Today, TRD is operating on all cylinders, but this was not always the case – particularly in regards to their workspace and storage equipment.
AAPEX to Have First-Ever ‘Green’ Zone
The Automotive Aftermarket Products Expo (AAPEX) will have its first-ever "Green" Zone at this year’s event to highlight environmentally-friendly products, tools and services. AAPEX will be held Tuesday, Oct. 30 through Thursday, Nov. 1, at the Sands Expo Center in Las Vegas, NV.
Tech Tip: Ready-to-Install Struts Save Time and Increase Profits
It should come as no shock that preassembled, ready-to-install struts have been a huge hit lately. The pros like them because they are much easier, faster and more profitable to install than ordinary struts. They don’t need a spring compressor to disassemble and reassemble the strut and they can get the customer back on the road much faster because of the time saved by not replacing the entire strut assembly.