Identifix Adds Genuine Volkswagen, Audi and Hyundai Service & Repair Informaton To Direct-Hit
Identifix has added genuine Volkswagen, Audi and Hyundai service and repair information to its award-winning online tool Direct-Hit.
Identifix Adds Genuine Volkswagen, Audi And Hyundai Service And Repair Information To Direct-Hit
Delivering information that comes straight from the factory, Direct-Hit allows professional technicians to diagnose and repair vehicles with greater speed, accuracy and confidence from a single online tool, said the company.
Delphi Announces New Oxygen Sensors For Audi, Volkswagen, BMW, Cooper, Nissan, Infiniti, Mazda And Honda Vehicles
Delphi introduces 19 new oxygen sensors covering more than 1.2 million North American Audi, Volkswagen, BMW, Cooper, Nissan, Infiniti, Mazda and Honda vehicles from 1995 to present.
Audi Tech Tip: Dynamic Steering Light On with DTCs/Needs ReFlash
Dynamic steering light is on and DTCs for overload, overuse or steering lock are stored in the Active Steering Control Module’s memory.
Tech Tip: Audi Has MIL On with Multiple Low Fuel Pressure DTCs
Due to fuel intrusion into the low-pressure system fuel pressure sensor (G410), a false signal may be sent to the controller, resulting in a reading that is out of tolerance.
Ross-Tech’s Software Turns PC into VW/Audi Automotive Diagnostic Tool
With Ross-Tech’s VCDS you can gain full access to all systems in cars from 1990 through the current model year.
Tech Tip: Audi MIL Is On, Misfire DTCs P0300-P0312 Set
If an Audi customer complains that the engine has reduced performance without a significant loss of power or stalling, verify if Campaign 28F2/J1 has been performed (model years 2002-’07 only). Also determine if the vehicle is experiencing rough idle, the MIL is flashing or constantly illuminated, or one or more of the following DTCs are stored: DTC P0300 (Random/Multiple Cylinder Misfire Detected); DTC P0301-P0312 (Cyl. 1-12 Misfire Detected).
New John Bean Alignment Audit System
The new John Bean Alignment Audit System significantly improves shop efficiency as any service technician can perform a fast and easy wheel alignment audit with live readings in approximately 60 seconds, said the company.
Tech Tip: Installation of the Drive Belt Kit CT 919K4/K5 for an Audi A4, 1.8 20 V
When refitting vehicles built before and during 1998, the old version stud bolt must be removed. The new version is then screwed into the same hole with a pre-mounted spacer.
Tech Tip: VW/Audi Calipers Don’t Retract When Replacing Rear Brake Pads
Vehicle Applications: 2004 A8 Quattro 4.2 2005-’06 A6 Quattro 4.2 2005-’07 A6 Quattro 3.2 2005 A8 Quattro 4.2 and 6.0 2006 Passat 3.6 2006-’07 Passat 2.0 2009 Q5 3.2 Customer Concern: When replacing the rear brake pads, the technician cannot get the calipers to retract. Tests/Procedures: 1. With a factory-compatible scan tool, read and