Servicing Maintenance-Friendly VW Engines
Volkswagens have always been maintenance friendly. From the very first models, ease of repair and durability have been built into the design. VW has managed to keep basic maintenance procedures relatively uncomplicated throughout the years. In this article, I’ll cover some of the more common underhood procedures on common VW models and include some tips
Automatic 4WD Hub Replacement
Automatic hubs are used on many 4×4 trucks to disengage the front wheels when four-wheel drive is not needed. Disconnecting the front wheels reduces friction and may improve fuel economy as much as one mile per gallon depending on the vehicle. A one mpg difference may not sound like much, but with gas costing around
CV Joints & Halfshafts
Rear-wheel drive has made a comeback on many large luxury import nameplates, but more than 80% of all cars on the road today are front-wheel drive. Most small- and mid-size cars are FWD, and all import minivans have FWD. What’s more, most of the full-size and crossover 4WD SUVs have halfshafts with CV joints front
Hunter Offers Wide Variety of Training Classes
Hunter Engineering Company annually trains thousands of students and experienced service technicians at the Research and Training Center in St. Louis, MO, at other regional training centers located throughout the country and through local Hunter representatives.
Rotary Lift Four-Post Vehicle Lifts Updated to Improve Technician Convenience
Rotary Lift has updated its complete line of light-duty four-post vehicle lifts to offer technicians greater convenience. The power unit and controls on each of the 12,000-lb. capacity lifts has been moved to the driver’s side front of the lift.
Tie Rod Geometry
Keeping the angles in line with Ackermann Most people consider the common tire rod to be low tech. But, when you consider how front suspensions have evolved from straight axles to independent designs, the tie rod has had to adapt to new angles and geometry. Keeping it on the road was simple with the straight
Steering Stabilizers: Suspension Geometry
Big rims or tires can look good and give a vehicle a unique look. But what is invisible becomes real ugly is the alignment and suspension angles that become altered. Also, that extra weight in stylist alloy rims or thick off-road tires can create a gyroscopic problem. Lifting Why do people lift trucks? The primary
A Brief History
In 1931, people thought Edward S. Babcox was insane for launching a magazine in the middle of the great depression. But, 75 years and almost 900 issues later, BRAKE & FRONT END is still going strong. For the past few months, I have been reading back issues of BRAKE & FRONT END non-stop. In musty
Management: Tools for Selling Ride Control
It has been estimated by one ride control manufacturer that 80 percent of vehicles in junkyards still have their original shocks or strut units. Part of the reason is that selling shocks and struts is difficult. It is an item that when it wears, it does not cause the vehicle to stop running. When it does wear, the driver is usually not aware of how bad it really has become.
Tech Tip: Clutch Replacements – Don’t Turn Them Away
Clutch replacement does not have the prestige of driveability diagnostics, but at times, it pays better. Some shops turn away clutch replacements in fear of comebacks and lost productivity. But, clutch replacement offers the shop opportunities to sell additional services that might slip past the bottom line.