Remove Seized Hardware and More with the MINI-DUCTOR

Main Navigation

Advertisement
Social Connect
Resources
Our Brand Family
Techshop Magazine
The automotive industry’s knowledge base for equipment, tools and supplies
Uncategorized

Remove Seized Hardware and More with the MINI-DUCTOR

Originators of the 'INDUCTOR,' the High Performance Magnetic Induction Heat System, Induction Innovations now offers an affordable option to every tech with the MINI-DUCTOR. The patented MINI-DUCTOR is a 1000 watt hand-held induction power inverter. It instantly heats and removes seized nuts, bearings, pulleys and other metal or mechanical hardware and ....

TechShop Staff Writers
By TechShop Staff Writers
Published:

Originators of the ‘INDUCTOR’, the High Performance Magnetic Induction Heat System, Induction Innovations now offers an affordable option to every tech with the MINI-DUCTOR. The patented MINI-DUCTOR is a 1000 watt hand-held induction power inverter. It instantly heats and removes seized nuts, bearings, pulleys and other metal or mechanical hardware and parts without the danger of an open flame or potential damage to nearby plastics. Also great for hail dent removal.

Related Articles

The MINI-DUCTOR COIL KIT comes with eight pre-formed coils, with an I.D. ranging from 3/4” to 1-3/4” giving the MINI-DUCTOR a larger array of applications. All the attachments come in a compact case for easy identification and storage of all coils. They also now offer new Mini-Pads for stripes, body side molds, stress relieving and heating other smaller objects as an option.

As seen on Two Guys Garage, award winning MINI-DUCTOR is an affordable ‘must have’ for all mechanics, mobile, body, tire and PDR techs (Paintless Dent Repair). The INDUCTOR Mini-Ductor can also be seen in the I-CAR On-Line Induction Heating Program, Induction Heaters, good towards 1/4-pt of the Gold Class Certification.

Leading the industry in patented Magnetic Induction Heating tools for more than eight years, Induction Innovations is a family owned, American manufacturer. They have a model for every customer, so call toll free (877) 688-9633 or visit www.theInductor.com.

You May Also Like

Features

Pulling Codes: Multiple Misfire Personalities

A vehicle fails an emission test due to a series of codes, with misfire activity found on cylinders 2, 4, 6, 8 and 3 – and a strange metallic sound can be heard when the rpms are raised. See how Carlton Banks solves this latest Pulling Codes case.

Avatar
By Carlton Banks
Technical Contributor for TechShop, Carlton is an emissions trainer for three Midwest states. He's made it a mission to find the truth in emissions-related codes.
Published:

A Story of Codes P0302, 04, 06, 08 & 03
 

This month’s diagnostic journey begins with a 2008 Land Rover Discovery that is taken in to a local testing facility for an emission test and fails due to a series of misfire codes.

Misfire activity is found on cylinders 2, 4, 6, 8 and 3; at first glance this series of codes implies that there may be bank 2 issues, but the cylinder 3 code throws a wrench into that mode of thought.

Read Full Article

More Uncategorized Posts
Using Volumetric Efficiency to Determine the Health of an Engine

Using an OBD II scan tool/dynamometer simulation/calculation program that can graph volumetric efficiency (VE) over rpms, contributor Glen Beanard devised a test sequence using real-world vehicles. This article takes you step by step through his diagnostic process.

By Glen Beanard
Intermittent Engine Misfire Analysis

Even for an experienced diagnostic technician, attempting to diagnose an intermittent misfire condition that occurs only under specific driving conditions can be a frustrating exercise. Contributor Gary Goms breaks it down, and includes tips for using a scan tool and a lab scope.

By Gary Goms
5 Mistakes Newbie Tire Techs Make

Nothing can turn a new tech into a veteran but time and experience, and often that experience is going to come from making mistakes – sometimes real bad ones – and learning from them (you hope). By addressing these most common mistakes right away with new tire techs, the worst of them can be avoided.

By Sean Phillips
Rivet Bonding Comes Full Blast

Now that rivet bonding is in the mainstream with the Ford F-150, it’s time for shops to look into training and equipment for this repair process.

By TechShop Staff Writers

Other Posts

‘Test Before Touch’ – It’s No Waste of Time

To help reduce the headaches involved in servicing TPMS, it’s important to use the “Test Before Touch” procedures in your shop. Used properly, TBT can form a strong foundation for everything else you do regarding TPMS, reduce complexity and help you educate and keep your customers.

By TechShop Staff Writers
The Right Diagnostic Tools Save You From Extensive Disassembly Time

It can sometimes be difficult to make the correct diagnosis for a hard-to-start complaint. And diagnostic time may be extensive — and expensive. This article shows how certain tools have the ability to automatically analyze waveforms for you.

By TechShop Staff Writers
Know the Specs for Your Social Media Accounts

If you’re doing social media, are you doing it effectively? Are your accounts set up correctly? Are you posting often enough? Mark Claypool answers some questions.

By Mark Claypool
Top 5 Tools: Kenny Younkins, Ken’s Auto Service Center

Kenny Younkins, owner Related Articles – Lisle 61860 Oil Filter Housing Torque Adapter – Mueller Kueps Presents Redesigned Sensor Tap Series – Lisle Low Profile Fuel Line Disconnect Ken’s Auto Service Center Akron, OH While Ken first said his favorite tool is his fishing rod, he said in the shop he prefers these five:  

By TechShop Staff Writers