New Snap-on Rechargeable 7.2 Volt LED Work Light is a 'Must Have' to Brighten Up Business

New Snap-on Rechargeable 7.2 Volt LED Work Light is a ‘Must Have’ to Brighten Up Business

Powerful, versatile, long-lasting and most importantly, bright, the new Snap-on Rechargeable 7.2 Volt LED Work Light (CTL761) is a "must have" addition to any service bay or Snap-on tool storage unit.

Powerful,
versatile, long-lasting and most importantly, bright, the new Snap-on Rechargeable
7.2 Volt LED Work Light (CTL761) is a “must have” addition to any service bay
or Snap-on tool storage unit.

“With its
rechargeable 7.2 volt lithium battery, rotating head and four-hour run time,
the new Snap-on Rechargeable 7.2 Volt
LED Work Light is a practical addition to any Snap-on toolbox or work area,”
said Rodger Isetts, product manager for Snap-on. “This extremely bright light
will illuminate the entire engine compartment and is perfect for a mobile work
station.”

Some of the
features and benefits of the new Snap-on
Rechargeable 7.2 Volt LED Work Light (CTL761) include:

• LED output of 200 lumen indicates a
super bright light

• Low battery Red LED illuminates to
inform when the battery needs to be recharged (Patent Pending)

• Four-hour run time provides bright
light for ample working time in dark areas

• Fast battery recharge time in just
30 minutes

• Can be positioned multiple ways for
many different applications

• Light head rotates 120 degrees

• Broad base allows light to stand
upright

• Attach the included hook to hang the
light from above

• Rear resting pad allows the light to
lie on its back to prevent it from rolling

• Tempered glass lens resists breakage

• Glass-filled nylon housing resists
automotive fluids

• Weight with battery pack: 0.8 pounds

• Single bulb LED with bulb life of
50,000 hours

• Aluminum head helps dissipate heat

• Battery and charger sold separately

Customers
can learn more about the new Snap-on
Rechargeable 7.2 Volt LED Work Light (CTL761), by contacting their
participating Snap-on franchisee or representative, visiting www.snapon.com/powertools or by calling toll free 877-SNAPON-4 (877-762-7664).

You May Also Like

New ProMAXX Diesel Fuel Injector Seal Puller/Saver ProKits

Ford Power Stroke 6.7L & GM Duramax 6.6L ProKits easily remove compression seals and shorten repair times

ProMAXX Tool introduces the Ford Power Stroke 6.7L Fuel Injector Copper Compression Seal Puller and Seal Saver ProKit (PMXISPS200PRO). The tool is designed to empower technicians to quickly remove seals from the head effortlessly and securely. In the coming months, a GM 6.6L Duramax Compression Seal Puller/Saver version will be available.

AMSOIL Introduces New OE 0W-40 100% Synthetic Motor Oil

The new OE 0W-40 is primarily for newer RAM HD trucks equipped with the 6.4-liter Hemi engine.

BendPak Full-Rise Scissor Lift Delivers Two-Post Performance

SP-7XE scissor lift lays flat and raises a vehicle six feet with an open center below.

CTA Tools Debuts Chrysler Cam Phaser Master Set – VVT & VVL

Applications included are for 2011-2022 Chrysler, Dodge & Jeep models.

Mayhew Introduces New 14-Piece Micro Hand Tool Set

This new set is a compilation of all the current micro line products from Mayhew; including pry bars, picks, hooks and screwdrivers.

Other Posts

Victor Reinz Reinzosil Sealant Added to Spicer CV Service Kits

Victor Reinz Reinzosil vulcanizing silicone boosts resistance to various fluids, making it sensor-safe for a wide range of applications.

Gray Tools Introduces Insulated Hex Bit Socket Set

The insulated tool sets are backed by a limited lifetime warranty.

Snap-on Debuts New General Service Set 

The company says technicians now have maximized tool concentration in the smallest footprint.

Chevron Introduces New Rykon Formula to Grease Product Line

The new calcium sulfonate complex-based grease is designed for heavy-duty and extreme pressure applications.