Mohawk’s SLT-2000 is a 2,000-lb. capacity scissor lifting table made to remove or install large transmissions, rear ends or differentials.
The SLT platform is 4′ long by 2′ wide and has anchoring points to safety secure the loads being lifted. The SLT-2000 operates on a 110-volt power unit to hydraulically raise the load. Minimum lifting height is 3′, with full height being 8′ tall for access under the tallest vehicles, or the highest lifts (or pits) in the marketplace.
Safety systems include 12-position mechanical locks, and hydraulic safeties consisting of velocity fuses and pressure compensated flow control valving.
This lift table handles powertrain components like engines and their transmissions, engines with transaxle assemblies, rear ends and large electric vehicle batteries. It will also serve as a work table where components can be lowered to a convenient work height for repairs.
Features include:
• An air/hydraulic foot pump includes a metered valve for safe lowering of the load.
• 5’ extension hose with quick disconnect fittings stores in the lift base. The foot pump can be removed from its holder and hydraulic hose quickly and easily extended using the extension hose. This provides hands-free operation of the pump anywhere around the lift’s perimeter.
• Scissors lift design provides easy 360° access to any component.
• Two heavy-duty ratchet tie-downs are included to safely secure the load on the lift table.
• Table top height from 31″ to 80-1/2″.
• Four 8″ diameter swivel caster wheels for easy maneuverability. Front wheels can be locked in position for steering. Rear wheels can be locked to prevent the lift from rolling.
For additional information, visit www.mohawklifts.com or call 1-800-833-2006.