Tech Tip: When to Change the Automatic Drive Belt Tensioner

Tech Tip: When to Change the Automatic Drive Belt Tensioner

While CARDONE water pumps, alternators, smog pumps and power steering pumps all do different jobs, they all have one thing in common: they are belt-driven. Without a properly functioning belt-drive system, these units can't work as designed. Most late-model vehicles use an automatic belt-tensioning device of some design.

Application:
All vehicles with serpentine belt-driven accessories (water pumps, alternators, smog pumps and power steering pumps).

Problem:
Premature failure or improper operation of belt-driven units.

Cause:
Possible failure of the belt-tensioning device.

Solution:
While CARDONE water pumps, alternators, smog pumps and power steering pumps all do different jobs, they all have one thing in common: they are belt-driven. Without a properly functioning belt-drive system, these units can’t work as designed. Most late-model vehicles use an automatic belt-tensioning device of some design. An over-tensioned belt causes premature failure of the unit, belt or both. An under-tensioned belt prevents these units from working reliably, sometimes causing them to not work at all. Both scenarios can lead to unnecessary replacement of the wrong component, increased warranties and cause customer dissatisfaction.

Installation Tip:
Follow the instructions below to see if your tensioner needs replacing.

1. Engine running, drive belt on (Remember, safety glasses and caution are required):
A. Listen for rattles and squeaks.

B. Inspect the drive belt alignment as it tracks from pulley to pulley:
• If the belt is tracking dead center on the pulleys, the tensioner is good.
• If the drive belt is tracking from one side to the other (belt wandering) or belt edge-wear is observed, replace the tensioner.

2. Engine off, drive belt off:
A. Look for signs of rust, especially between the tension arm and base. Replace tensioner.

B. Move the arm on the tensioner:If it feels rough and tight, replace the tensioner.If it’s smooth and easy to move, don’t replace the tensioner.

C. Manually spin idler pulley by hand:
• If it’s smooth with no wobble, no tensioner replacement needed.
• If the pulley turns rough, grinds or wobbles, replace the tensioner.

Please refer to your vehicle’s service manual for specific instruction concerning proper operation of the belt system, its servicing, replacement and adjustment.

Note: This Pro Tech bulletin is supplied as technical information only and is not an authorization for repair.

Tech Tip courtesy of CARDONE.

For additional information on products offered by CARDONE, visit www.cardone.com.

You May Also Like

#8 Shop Air Systems

An aging air system can affect the output of air tools and equipment.

Shop Aire Systems

An aging air system can affect the output of air tools and equipment. Often the tools are blamed when a lack of air from corroded, restrictive piping is the culprit. Testing the efficiency of your air system is important, and restoring proper airflow and pressure leads to improved equipment and technician efficiency, as well as energy savings. Updating old or building new, your air system is the heart of your shop.

Mobis Starts Construction of EV Battery System Plant in Spain

The new EV battery system plant will supply Volkswagen and is aiming for mass production by 2026.

#7 Wrenches

Wrenches are the core of every tool collection.

Wrenches
Maverick Tire Changer: Bead Massage

The bead massage feature on the Maverick tire changer helps with better tire and wheel fitment for balancing.

Navistar Surpasses 100 Authorized EV Dealers

Navistar will have more than 30% of its dealer locations ready to support the sale and service of both International and IC Bus EVs.

Other Posts

ADAS: Coming of Age

ADAS are categorized into levels, determined by the amount of automation for any given system.

Hunter Maverick Tire Changer: 19.5-inch Tire Service

Learn to handle 19.5-inch wheels, which are common on some delivery vehicles, with Hunter’s Maverick tire changer.

#6 Multimeter DC Voltage Testing

Diagnosing electrical system problems isn’t always easy, and guessing is never an option.

LG Energy Solution’s Battery Facility to be Completed by 2026

LG Energy Solution said the cylindrical battery plant, called LG Energy Solution Arizona, will produce 46-Series batteries for EVs.