Volkswagen Tech Tip: Humming Noise During Cornering

Main Navigation

Advertisement
Social Connect
Resources
Our Brand Family
Techshop Magazine
The automotive industry’s knowledge base for equipment, tools and supplies
Post

Volkswagen Tech Tip: Humming Noise During Cornering

A humming sound coming from the general area of the front end of an affected vehicle (see article for list) may be noticeable during slow speed turns with the steering wheel almost to full-turning position. The noise goes away when the steering wheel is returned to the center position.

TechShop Staff Writers
By TechShop Staff Writers
Published:

A humming sound coming from the general area of the front end of an affected vehicle (see below) may be noticeable during slow speed turns with the steering wheel almost to full-turning position. The noise goes away when the steering wheel is returned to the center position.

Related Articles

Affected Models:
• 1998-on New Beetle w/02J transmission; and
• 1999-on New Golf, New Jetta w/02J transmission.

The noise may be generated from a differential spider gear contacting the one-piece thrust washer under load.

Service Procedure:
If a vehicle exhibits this condition, do the following:
1. Drain the transmission fluid.
2. Refill the transmission with oil P/N G 052 171 (see VESIS for fill quantities).
Note: Part numbers are for reference only. Always check for the latest parts information.
3. Road-test the vehicle to confirm that the noise has been eliminated.

Technical service bulletin courtesy of ALLDATA.

For additional information, visit www.alldata.com.

You May Also Like

Tool Intel

#8 Shop Air Systems

An aging air system can affect the output of air tools and equipment.

Eric Garbe
By Eric Garbe
Eric Garbe is a graduate of Columbus State Community College with a degree in Automotive Maintenance Technology. He has extensive independent and dealership field experience as a technician and shop owner and is an ASE Certified Master Technician and former Adjunct Automotive Professor. He has been professionally writing automotive technical articles and documents for many years and in his free time enjoys restoring old cars and creating custom interiors and upholstery.
Published:
Shop Aire Systems

An aging air system can affect the output of air tools and equipment. Often the tools are blamed when a lack of air from corroded, restrictive piping is the culprit. Testing the efficiency of your air system is important, and restoring proper airflow and pressure leads to improved equipment and technician efficiency, as well as energy savings. Updating old or building new, your air system is the heart of your shop.

Read Full Article

More Posts
Mobis Starts Construction of EV Battery System Plant in Spain

The new EV battery system plant will supply Volkswagen and is aiming for mass production by 2026.

By TechShop Staff Writers
#7 Wrenches

Wrenches are the core of every tool collection.

By Eric Garbe
Wrenches
Maverick Tire Changer: Bead Massage

The bead massage feature on the Maverick tire changer helps with better tire and wheel fitment for balancing.

By TechShop Staff Writers
Navistar Surpasses 100 Authorized EV Dealers

Navistar will have more than 30% of its dealer locations ready to support the sale and service of both International and IC Bus EVs.

By TechShop Staff Writers

Other Posts

ADAS: Coming of Age

ADAS are categorized into levels, determined by the amount of automation for any given system.

By Eric Garbe
Hunter Maverick Tire Changer: 19.5-inch Tire Service

Learn to handle 19.5-inch wheels, which are common on some delivery vehicles, with Hunter’s Maverick tire changer.

By TechShop Staff Writers
#6 Multimeter DC Voltage Testing

Diagnosing electrical system problems isn’t always easy, and guessing is never an option.

By Eric Garbe
LG Energy Solution’s Battery Facility to be Completed by 2026

LG Energy Solution said the cylindrical battery plant, called LG Energy Solution Arizona, will produce 46-Series batteries for EVs.

By TechShop Staff Writers