S & G TOOL AID Introduces 10-lb. Slide Hammer and Pullers
New from S & G TOOL AID CORP. is the #66370, 10-lb. Slide Hammer and Pullers for front wheel hubs and rear axles. This set is used to easily remove front wheel hubs and flange-type rear axles. The pullers fit 4-, 5- and 6-bolt patterns found on most domestic and import cars and light trucks.
KTI ‘Separates’ Itself by Introducing Line of Pullers and Separators
K-Tool International (KTI), a leading manufacturer of tools for the automotive aftermarket and professional mechanic, will add a number of reversible pullers and bearing separators to its product line.
Gray Tools Introduces Made-in-USA Insulated Socket Sets
Two new insulated socket sets are available in 1/4″ and 3/8″ drive sizes.
ProMAXX Debuts Air-Hammer-Powered Fuel Injector Puller Kits
The Base Kit and ProKit Plus versions include a unique air-hammer-powered punch rod to pop injectors free.
Milton Industries Acquires ProMAXX Tool
This expands Milton’s reach into ProMAXX’s truck and automotive specialty hand tool product offerings and market channels.
Commercial Truck Specialty Tools & Equipment from ESCO
These new tools are designed to safely install and remove components in the driveline, steering and suspension line.
Killer Tools Announces New Steel Electrode Dent Puller
This is the first steel dent pulling system complete with an integrated seated cart, and all weld on pulling capabilities.
Snap-on Releases HD, LD Interchangeable Master Puller Sets
The tough one-piece jaw construction of both sets does not use pins or bolts. This provides a stronger, safer jaw with six jaw sets.
OTC Pitman Arm Puller Set Saves Techs Time on Removal, Installation
This set contains three Pitman arm pullers for a wide range of applications on 1993 and later GM, Ford, Dodge and Jeep models.
OEMTOOLS A/C Clutch Tool Kit for Ford, GM, Chrysler Systems
The kit provides all the tools necessary for the removal and installation of A/C clutches on most GM, Ford and Chrysler models.