Connect with us

Buyer’s Guide

Need to update your Buyers Guide Listings?

Click Here

Not Listed? Add your company information.

Click Here

Mac Tools

Phone: 800-MAC-TOOLS 505 N. Cleveland Ave.
Westerville OH 43082

Recent Products

Mac Tools Offers 6 New Impact Wrenches

by TechShop Staff Writers - 05-01-2018

Mac Tools added six new tools to its air impact family. Four high-performance impact wrenches were added with two standard air impact wrenches, both consisting of 1/2” and 3/8” drive sizes. The ...

Advanced Digital Multimeter from Mac Tools

by TechShop Staff Writers - 03-12-2018

Mac Tools offers its Advanced Digital Multimeter (EM823), which offers Bluetooth and USB communication, battery and charging system analysis and advanced measure for sensor and actuators. The h...

Mac Tools Jacket: Stay Warm with the Push of a Button

by TechShop Staff Writers - 02-07-2018

  The 20V MAX* Soft-Shell Heated Jacket from Mac Tools features a durable wind- and water-resistant shell; four heat zones: neck, chest, waist and middle-back; and an LED controller offers thr...

Variety of Pliers Sets Available from Mac Tools

by TechShop Staff Writers - 01-08-2018

Mac Tools offers a variety of pliers sets including: 5-PC. Next Generation Pliers Set (FPS5) Patented rack and pinion design encourages slot engagement and reduces blocking points Large...

Mac Tools .401" Shank Long and Short Barrel Air Hammers

by TechShop Staff Writers - 12-05-2017

Mac Tools’ .401” Shank Long and Short Barrel Air Hammers are for use in separating ball joints and tie-rod ends, breaking loose frozen bolts, removing bushings in control arms, cutting applicati...

Store Tools Right Where You Need Them with Mac Tools Utility Carts

by TechShop Staff Writers - 11-29-2017

The MB198UC / MB198UCCOMBO Utility Carts from Mac Tools feature a sliding top lid with stainless steel top surfaces and a rear grommet for power access. The carts are available in three-drawer (MB1...

Mac Tools New Macsimizer Workstation for Efficient Tool Storage

by TechShop Staff Writers - 07-17-2017

The new Mac Tools mid-size MB5930 Macsimizer Workstation features the benefits of the company’s 30” depth unit, while its 59” width is more conducive to some work spaces. Two extra-wide t...

Mac Tools Introduces New Cordless Brushless Impact Wrench and Impact Driver

by TechShop Staff Writers - 06-05-2017

As part of the 2017 Mac Tools Tool Fair, Mac Tools announces the launch of its new 20V MAX* ¼” Brushless Impact Driver (MCF886) and 20V MAX* ⅜” Brushless Impact Wrench (MCF891). These new tools...

Mac Tools Offers R134a Semi-Auto A/C Service

by TechShop Staff Writers - 05-02-2017

Recover, vacuum and charge A/C systems with the Mac Tools ACR220M R134A Semi-Auto A/C Service Machine. Its longer 12’ hoses allow more versatility when raising vehicles and working on large truck...

Mac Tools Introduces Pro Eye Light

by TechShop Staff Writers - 05-01-2017

The Pro Eye Light (SPL1500M) from Mac Tools is an exclusive design rechargeable area light. It features three power settings: low/medium/high, offering 500/1000/1500 lumens. It features a ru...

Mac Tools New Tool Storage Selections

by TechShop Staff Writers - 04-13-2017

At the recent 2017 Mac Tools Tool Fair, the company introduced new tool storage options. The MB1004-STEALTH 10-Drawer Workstation features 5” and 3” Xtra-Wide top drawers for convenient acc...

Mac Tools Announces New Reversible Ratcheting Wrench Sets

by TechShop Staff Writers - 04-03-2017

  Mac Tools offers two 12-piece Ratcheting Wrench Sets – one SAE (SRWO212PTB) and one metric (SRWMO212PTB), as well as a six-piece Metric Large Reverse Ratchet Wrench Set (SRWMO26PT). ...

Mac Tools’ MDT 10 Diagnostic Tools Delivers Enhanced Performance Boost for Techs

by TechShop Staff Writers - 01-03-2017

The Mac Tools MDT 10 is an ergonomically designed vehicle diagnostic tool built specifically for technicians. The MDT 10 features best-in-class coverage for more than 25,000 vehicle systems, and ca...

Mac Tools Offers Hi Vis Combination Screwdriver Set

by TechShop Staff Writers - 06-01-2016

The six-piece Mac-Grip Combination Screwdriver Set from Mac Tools features a 360° ergonomic textured grip for maximum comfort. The tools feature “tip ID” for easy recognition of tip type when ...

Mac Tools Cordless Tools Let You Break Free

by TechShop Staff Writers - 01-22-2016

Built from glass-filled nylon and other quality materials, Mac Tools’ cordless tools, including impact wrenches, ratchets and drills, are built to withstand harsh automotive fluids in a shop en...

Mac Tools Delivers Next Generation Of Die Grinders

by TechShop Staff Writers - 12-16-2015

Mac Tools introduces the next generation of pneumatic die grinders. The Die Grinder line was designed for the professional automotive technician with a powerful design that provides optimal comfor...

Make A Big Impact With Mac Tools New 1" Impact Tools

by TechShop Staff Writers - 10-28-2015

Mac Tools presents new 1" impact tools that are available in inline and pistol configurations. The new impact tools provide excellent power, while also being lightweight for less fatigue when working ...

Raise Awareness With Mac Tools New Breast Cancer Awareness Tool Box

by TechShop Staff Writers - 10-06-2015

Mac Tools presents the MB1000A-BCA 2015 Breast Cancer Awareness Tool Box. Mac Tools is a proud supporter of The Stefanie Spielman Fund for Breast Cancer Research and the Breast Cancer Society of Canad...

Mac Tools Offers 3 New Cordless Impacts

by TechShop Staff Writers - 09-04-2015

Mac Tools presents three new and innovative cordless impacts that are available in several variations to meet a technician’s impact tool needs. The new impacts offer reliable power, comfort for more...

Get Full Access with Mac Tools’ Line of Axis Ratchets

by TechShop Staff Writers - 07-29-2015

Mac Tools presents a line of Axis ratchets designed to allow full access for every user. The new line features a compact pear head design and a 4° arc swing that provides users ultimate access in eve...

Mac Tools Torque Sockets Remove Fasteners Rounded Up to 85%

by TechShop Staff Writers - 06-18-2015

Precision Torque performance from Mac Tools has been expanded to include a line of hand and impact sockets that won’t slip on fasteners rounded up to 85%. The unique inner geometry of the 6-p...

Mac Tools' Mentor Touch Scout Provides Diagnostics at Your Fingertips

by TechShop Staff Writers - 03-09-2015

Mac Tools’ Mentor Touch Scout is a professional scan tool built into a durable Android tablet with a 7” capacitive, high-resolution touch-screen display. It offers full access to Google Play an...

Mac Tools Is Wrenching for a Cure

by TechShop Staff Writers - 10-22-2014

In support of Breast Cancer Awareness month, Mac Tools is featuring a variety of Wrenching For A Cure products available for purchase in the Flyer 11 through Nov. 2. Featured pink products include clo...

Break Free With the Mac Tools Line of Cordless Tools

by TechShop Staff Writers - 08-13-2014

Mac Tools’ cordless tools includes impact wrenches, ratchets and drills that are designed and built tough for automotive technicians. Built from glass-filled nylon (GFN) and other quality materials,...

Illuminate Your Work Space with Lights from Mac Tools

by TechShop Staff Writers - 07-23-2014

Mac Tools presents a new line of corded shop lights for professional technicians that feature a higher wattage of light output to illuminate the work area brighter than normal work lights. Availabl...

Recent News

Mac Tools Ranks in the Top 10 Fastest Growing Franchises

by TechShop Staff Writers - 03-09-2018

Entrepreneur magazine has ranked Mac Tools the No. 8 Fastest-Growing Franchise, nationwide, for 2018. Over 1,000 companies applied for the 39th annual Franchise 500 ranking, making this year th...

Mac Tools Welcomes New President Ken Hartman

by TechShop Staff Writers - 12-19-2017

Mac Tools has announced Ken Hartman as president, Mac Tools, North America. Hartman and his leadership team will advance Mac Tools’ focus on innovation and Made in the USA with Global Materia...

Mac Tools Named Top New Franchise In 2015 By

by TechShop Staff Writers - 12-09-2015

Mac Tools, an international company with distributors and franchisees in the United States, Europe, Canada and Japan, has been named the No. 1 Top New Franchise for the second straight year by Entrepr...

Race For The Cure - Mac Tools New Breast Cancer Awareness Dragster

by TechShop Staff Writers - 10-05-2015

Mac Tools unveils the newly wrapped Mac Tools Top Fuel Dragster to bring awareness to Breast Cancer. Top Fuel driver, Doug Kalitta and crew will be wearing matching Breast Cancer Awareness crew shirts...

Mac Tools Donates to Breast Cancer Research Fund through Sales of ‘Wrenching for a Cure’ Products

by TechShop Staff Writers - 04-28-2015

Mac Tools has made donations of more than $30,000 to The Stefanie Spielman Fund for Breast Cancer Research and over $4,000 to The Breast Cancer Society of Canada. Mac Tools would like to thank ...



Phone: 847-719-5600

Recent Products

Recent News


Magid Glove and Safety Manufacturing Co.

Phone: 800-867-1083 2060 North Kolmar Ave.
Chicago IL 60639

Recent Products

Magid's Work Glove Series Offers Comfort, Durability

by TechShop Staff Writers - 12-10-2015

Magid introduced mGard gloves at this year’s AAPEX. Designed with innovative blended materials and coatings, this series sets a new standard in unprecedented comfort, combined with unrelenting, ...

Recent News


MagnoGrip Inc.

Phone: 305-330-6863Phone: 888-751-5975Fax: 415-373-3840 904 22nd Street
San Francisco CA 94107

Recent Products

Recent News



Phone: 303-468-0662Fax: 303-690-8144 621 Southpark Drive, Unit 1900
Littleton CO 80120

Recent Products

Recent News



Phone: 1-866-MAHA-USAFax: 334-983-1094 2404 East Highway 134
Pinckard AL 36371

Recent Products

MAHA USA Presents Mobile 2-Post Lift

by TechShop Staff Writers - 03-07-2018

MAHA USA presents its FHB 6500 Mobile 2-Post Lift, which is a battery-operated, completely mobile automotive lift. Providing maximum versatility, the lift easily moves from bay to bay, indoors or...

Recent News


MAHLE Aftermarket

Phone: 248-347-9719Fax: 248-596-8899 23030 Mahle Drive
Farmington Hills MI 48335

Recent Products

MAHLE Scan Tool Features Reflashing Capability

by TechShop Staff Writers - 09-11-2015

The MAHLE TechPRO Diagnostic Scan Tool features an optional SAE J-2534 pass-thru capability for reflashing and reprogramming emissions-related modules (ECM/TCM). The tool’s vehicle communication ...

New A/C Machines from MAHLE Help 
Shops Safely Service R134a and R1234yf

by TechShop Staff Writers - 05-19-2015

MAHLE Service Solutions has released ACX, the company’s new line of ArcticPRO A/C service equipment. The ACX1280 series is designed to competently, efficiently and safely service R1234yf refriger...

New Machines From MAHLE Service Solutions Help 
Shops Safely Service R134a And R1234yf Refrigerants

by TechShop Staff Writers - 02-03-2015

MAHLE Service Solutions has announced the release of ACX, its new line of ArcticPRO A/C service equipment. The ACX1280 series is designed to competently, efficiently and safely service the new R1234y...

MAHLE Service Solutions Introduces TechPRO Diagnostic Scan Tool

by TechShop Staff Writers - 11-05-2014

  At a news conference yesterday at its AAPEX booth, MAHLE Service Solutions introduced the TechPRO diagnostic scan tool, a versatile, software-based, laptop- or tablet-enabled tool to hel...

Recent News

MAHLE Becomes Solutions Provider with New Innovations Presented at Automechanika Frankfurt

by TechShop Staff Writers - 09-12-2018

At Automechanika Frankfurt, MAHLE Aftermarket presented its service and solutions expertise for "Workshop 4.0" and a wide range of drive types. Efficient and intuitive solutions that save time and...

MAHLE Celebrates 30 Years of AC Service

by TechShop Staff Writers - 08-30-2018

This year, MAHLE Aftermarket looks back at 30 years of providing reliable A/C service equipment. This product group is continuously being expanded to meet every need. At Automechanika Frankfurt...

MAHLE Service Solutions' New R1234yf Recovery Machine Named 'Best Use Of Technology' At MACS 2015

by TechShop Staff Writers - 03-03-2015

The ArcticPRO ACX1280 machine from MAHLE Service Solutions received the “Best Use of Technology” new product award at the 2015 Mobile Air Conditioning Society (MACS) Worldwide Trade Show. The awar...

MAHLE Service Solutions Will Introduce New Touch Screen Displays 
And A/C Machines At MACS 2015 In Orlando

by TechShop Staff Writers - 01-29-2015

MAHLE Service Solutions showcases its new interactive touch screen displays and new A/C units for processing R1234yf and R134a refrigerants at the 2015 MACS (Mobile Air Conditioning Society) Training ...

MAHLE Service Solutions Unveils New Website

by TechShop Staff Writers - 11-12-2014

MAHLE Aftermarket, Service Solutions, formerly MAHLE RTI, has introduced its new website at The site contains updated information on MAHLE Aftermarket’s newest divisi...


MAHLE Service Solutions (a division of MAHLE Aftermarket)

Phone: 717-840-0678 10 Innovation Drive
York PA 17402

Recent Products

MAHLE Next Generation ArcticPRO A/C Handling Systems for R134a and R1234yf Refrigerants Now Available

by TechShop Staff Writers - 04-01-2019

The next generation of ArcticPRO A/C refrigerant handling systems from MAHLE Service Solutions are now available for sale. The six newly designed machines were introduced to the industry at AAPEX...

MAHLE Service Solutions ArcticPRO Unit Helps Safely Recover A/C Refrigerants

by TechShop Staff Writers - 02-09-2018

The MAHLE Service Solutions ArcticPRO ROU250 is a recovery-only unit designed to safely remove the new mildly flammable R1234yf refrigerant even if it is contaminated. It will also safely recover ...

MAHLE Service Solutions Offers TechPRO VDS Combo Kit for Light and Commercial Vehicle Diagnostics

by TechShop Staff Writers - 08-30-2017

  Earlier this year at Heavy Duty Aftermarket Week (HDAW), MAHLE Service Solutions announced its collaboration with Noregon to introduce a new in-shop diagnostic and repair solution for commer...

MAHLE Service Solutions Offers SAE Certified Unit for R134a Heavy-Duty Vehicle A/C Service

by TechShop Staff Writers - 08-22-2017

The ArcticPRO ACX1180C refrigerant handling system from MAHLE Service Solutions is an SAE-certified unit to service heavy-duty vehicles that use R134a refrigerant. Easy to service and maintain,...

New A/C Service Unit from MAHLE Service Solutions Helps Aftermarket Shops Economically Service R1234yf Vehicles

by TechShop Staff Writers - 06-13-2017

  The new ArcticPRO ACX1250 air conditioning (A/C) service unit by MAHLE Service Solutions economically services R1234yf vehicles. R1234yf A/C refrigerant is designed to be environmentally ...

MAHLE Refrigerant Identification Tools Help Prevent Contamination of A/C Service Equipment

by TechShop Staff Writers - 11-29-2016

Utilizing a refrigerant identification tool is highly recommended and required on some air conditioning (A/C) service equipment. According to Andreas Huber, general manager, MAHLE Service Solut...

Increased Vehicle Coverage for TechPRO Diagnostic Scan Tool

by TechShop Staff Writers - 10-26-2016

MAHLE Service Solutions has added vehicle coverage for its TechPRO diagnostic scan tool. Continuing the plan for aggressive coverage expansion, TechPRO now covers most Ford vehicles back to model ...

FluidPRO Offers Complete Brake System Service in Less Than 10 Minutes

by TechShop Staff Writers - 10-19-2016

The FluidPRO BFX-3 Brake Flush System from MAHLE Aftermarket Inc., Service Solutions delivers complete brake fluid exchange in a simple, three-step process, says the company. Compatible with b...

Analyze, Diagnose and Repair with MAHLE's Diagnostic Scan Tool

by TechShop Staff Writers - 04-20-2016

The MAHLE TechPRO Diagnostic Scan Tool helps technicians work smarter, not harder. The most advanced technology available for professional technicians, this versatile, Cloud-based, PC- or tablet-en...

MAHLE Announces ArcticPRO A/C Machine Lineup Additions; Includes Two Machines With TechPRO Integrated

by TechShop Staff Writers - 11-03-2015

  MAHLE Service Solutions announced Tuesday at AAPEX 2015 additions to its line of ArcticPRO air conditioning (A/C) service units. The ArcticPRO ACX1185 is a unit that offers integration of th...

Recent News

MAHLE Service Solutions Launches New Facebook Page

by TechShop Staff Writers - 05-21-2019

MAHLE has announced the official launch of its MAHLE Service Solutions Facebook page. The company will use this platform to provide automotive service professionals in the U.S. and Canada with te...

MAHLE to Host AAPEX Meet and Greet with EricTheCarGuy and Charles the Humble Mechanic

by TechShop Staff Writers - 10-09-2018

MAHLE Service Solutions will host auto repair experts Eric “TheCarGuy” Cook and Charles “Humble Mechanic” Sanville during meet and greet events at AAPEX 2018 in Las Vegas. MAHLE Service So...

From Mustang Giveaway to Training Sessions at New Mobility Park, MAHLE Plans Full Schedule for AAPEX 2017

by TechShop Staff Writers - 10-25-2017

MAHLE Aftermarket Inc. and MAHLE Service Solutions will be holding a number of events and training sessions at this year’s Automotive Aftermarket Product Expo (AAPEX) in Las Vegas. The activ...

MAHLE Service Solutions Broadens Tool & Equipment Offering for U.S. Heavy Duty Aftermarket

by TechShop Staff Writers - 01-27-2017

  MAHLE Service Solutions has announced new partnerships with Gray and Noregon to strengthen its product portfolio of tools and equipment for the heavy-duty aftermarket. Under the agree...

MAHLE Service Solutions Introduces SmartACX Smartphone Application

by TechShop Staff Writers - 11-16-2016

MAHLE Service Solutions has introduced its SmartACX Smartphone App, a new productivity-enhancing application program that helps technicians view the status of the company’s ArcticPRO machines du...

MAHLE Service Solutions To Feature TechPRO Demos at VISION 2016

by TechShop Staff Writers - 03-01-2016

MAHLE Service Solutions will showcase its new TechPRO diagnostic scan tool during the 2016 VISION Hi-Tech Training & Expo in Overland Park, KS (Kansas City area), March 3-6. Located at booth #912,...


Makita USA

Phone: 800-4 MAKITAFax: 513-398-3527 1450 Feehanville Drive
Mount Prospect IL 60056

Recent Products

3 New 18V Impact Wrenches from Makita Combine Torque with Precise Fastening Control

by TechShop Staff Writers - 03-30-2016

Makita has released three new 18V LXT Lithium-Ion Brushless High Torque Impact Wrenches: the 3/4” Square Drive (XWT07M/Z), 1/2” Square Drive (XWT08M/Z) and 7/16” Hex Chuck (XWT09T/Z). Ea...

Makita Tools Hammer Driver-Drill, Impact Driver and Batteries Are Included in Kit

by TechShop Staff Writers - 01-22-2016

Makita technology delivers category-leading charge time, according to the company, so the battery spends more time working and less time sitting on the charger. Makita’s XT211MB kit includes a va...

Makita Tools' Brushless Impact Driver Offers More Features

by TechShop Staff Writers - 09-03-2015

Makita has released the new 18V LXT Lithium-Ion Brushless Quick-Shift Mode 3-Speed Impact Driver, model XDT09M. It is Makita’s most powerful and most compact impact driver. The tool features Quic...

Makita’s Compact Brushless Impact Driver Offers More Features

by TechShop Staff Writers - 07-29-2015

Makita Tools has released the new 18V LXT Lithium-Ion Brushless Quick-Shift Mode 3-Speed Impact Driver, model XDT09M. It’s part of Makita’s expanding 18V Lithium-Ion series, the company’s...

Makita's Cordless Combo Kit Features Compact, Ergonomic Tools

by TechShop Staff Writers - 06-18-2015

The 12V max Lithium-Ion Cordless 3-Pc. Combo Kit (Model LCT319W) from Makita Tools features easy-to-use tools with an ultra-compact, ergonomic design. The Impact Driver offers a variable speed (0-2...

Makita Offers Cordless Metalworking Solution with 18V LXT Brushless Angle Grinder

by TechShop Staff Writers - 06-03-2015

Makita has released a new cordless solution for metalworking with the 18V LXT Lithium-Ion Brushless Cordless Cut-Off/Angle Grinder (XAG03M). The XAG03M is powered by the Makita 18V 4.0Ah battery for l...

Makita Releases 4 New Accessories for Increased Performance and Efficiency

by TechShop Staff Writers - 03-25-2015

Makita recently released four new accessories for fastening, scraping, concrete breaking and grinding. All are engineered for increased efficiency and results.   Hollow Sockets When inst...

Get Longer Run Time and Added Convenience with Makita’s Multi-Tool

by TechShop Staff Writers - 03-06-2015

Makita has released a new 18V LXT Lithium-Ion Cordless Multi-Tool Kit (model XMT035) with tool-less accessory change and longer run time than the previous model. The XMT035 is engineered for fast ...

Makita 18V LXT Hammer Driver-Drill Delivers More Speed and Torque in a Compact Size

by TechShop Staff Writers - 11-17-2014

Makita’s18V LXT Lithium-Ion Brushless Hammer Driver-Drill, model XPH06 delivers 35% more drilling, driving and fastening speed than the previous model, with a minimal increase in size and weight for...

Makita 18V LXT Brushless 1/2" Hammer Driver-Drill Delivers Increased Torque, Speed & Run Time

by TechShop Staff Writers - 10-29-2014

Makita has released its 18V LXT Lithium-Ion Brushless 1/2" Hammer Driver-Drill, model XPH07M. The new Hammer Driver-Drill a full 1,090 in.-lbs. of torque, and is powered by the Makita 18V LXT Lith...

Makita Enhances Polisher with New Features

by TechShop Staff Writers - 09-16-2014

      Makita has launched its new 7" Polisher, model 9237C. The new 9237C combines consistent power and control with improved durability and performance features for high-q...

Makita's Versatile 18V LXT Li-Ion Job Site Fan

by TechShop Staff Writers - 08-26-2014

Makita has released a new 18V LXT Lithium-Ion Cordless 13"Job Site Fan (DCF300Z, tool only). It's the latest addition to the expanding 18V LXT  line-up, the world's largest cordless tool series p...

Makita Expands 18V Li-Ion Lineup with 2.0 Ah and 4.0 Ah Batteries

by TechShop Staff Writers - 07-23-2014

Makita has expanded its 18V lithium-ion cordless tool platform with the 18V Compact Lithium-Ion 2.0 amp-hour battery (BL1820) and the 18V LXT Lithium-Ion 4.0 Ah battery (BL1840). The two new batter...

Recent News

Makita to Travel Across America on Driving Innovation Tour

by TechShop Staff Writers - 07-10-2018

Makita, a leader in cordless tool technology, is hitting the road with the new Driving Innovation Tour, a fleet of fully-custom vehicles with product specialists delivering an interactive and ha...

Makita Notifies Tool Users of the Hazards, Risks of Using Non-Genuine Makita Lithium-Ion Batteries

by TechShop Staff Writers - 12-29-2014

Makita is delivering a clear message to power tool users and dealers regarding the hazards and risks of non-genuine “knock-off” Makita Lithium-Ion batteries: Don’t do it. “Makita has be...


Malco Products, Inc.

Phone: 320-274-8246Fax: 320-274-2269
Contact: Michelle Pippo
P.O. Box 400, 14080 State Highway 55 NW
Annandale MN 55302-0400

Recent Products

Malco Products, SBC Introduces Axial Welding Pliers

by TechShop Staff Writers - 02-28-2019

Malco Products, SBC has bolstered their growing line of professional tools for auto-repair technicians with six different axial welding pliers. The fast, secure clamping and one-finger release ...

Malco Sanding Block Holds Hand-Pressed Contours

by TechShop Staff Writers - 03-15-2017

The Malco Conformable Sander is a re-usable sanding block that holds a hand-pressed contour. The unique block design can be set and re-set to match auto body contours throughout the sanding operat...

Malco Offers 4-in-1 Multi-Socket Driver

by TechShop Staff Writers - 08-03-2016

This versatile, compact, multi-socket nut driver from Malco Products Inc. is a handy tool for pocket or pouch, says the company. It is designed for the trade professional and offers superior perf...

Malco Products Offers Air-Actuated Rapid Dent Removal System

by TechShop Staff Writers - 12-17-2014

The RADiTAP Rapid Dent Removal System from Malco Products, Inc. is an air-actuated, long-reach pick solution for paintless dent removal and auto-body panel restoration. Use the RADiTAP to access de...

Malco Tool Attachments Now Even More User/Drill-Friendly

by TechShop Staff Writers - 08-06-2014

TurboShear and TurboXTool Drill Attachments from Malco Products, Inc. are now even more user/drill-friendly with the introduction of a versatile new hex shank drive shaft that fits a broad range of 1/...

Recent News

Malco Products, SBC Begins Production of New Locking Pliers at Former VISE-GRIP Factory

by TechShop Staff Writers - 10-23-2018

After 10 years, tool manufacturing officially returns to DeWitt, Nebraska, as Malco Products, SBC celebrates the grand opening of its new production facility. As part of the company's expansion, M...


Martech Services Company

Phone: 800-831-1525Fax: 507-843-4953
Contact: Jamie Hanson
PO Box 7079
Mazeppa MN 55956

Recent Products

Recent News


Martin Tool & Forge Division

Phone: 817-258-3000Fax: 817-258-3173
Contact: Tom Slife
3600 McCart Avenue
Ft. Worth TX 76110

Recent Products

Martin Tool & Forge Celebrates 100th Anniversary With New Tool Set

by TechShop Staff Writers - 12-19-2018

Martin Tool & Forge is celebrating their 100th anniversary with a limited edition tool set that that was launched and on display at the 2018 SEMA show. The set marks the company's 100 years of...

Repair Aluminum with Martin Tools Hand Tool Set

by TechShop Staff Writers - 06-16-2017

As part of Martin Tools’ Collision Repair Program, the company offers its 647KALFG Body & Fender Repair Set with fiberglass handles. This tool set includes seven U.S. made body and fender rep...

One-Man Operation Easy with Martin Wrench Retainer

by TechShop Staff Writers - 03-06-2017

Martin Wrench Retainers are safe and easy-to-use tools designed to hold a striking wrench (also called a slugging wrench or hammer wrench) on a nut for a safer, hands free, one-man operation. T...

Light-Weight Dinging Hammer Available from Martin Tools

by TechShop Staff Writers - 09-07-2016

Martin Tools now offers its Light Weight Dinging Hammer with wood or fiber glass handles (167G/167FG). These hammers are great for aluminum work, bumping odd fender or bumper contours. The shor...

Martin Offers Wingding Spoon Dolly for Body Issues on High Fins

by TechShop Staff Writers - 03-30-2016

Martin Tools’ Body Spoons are drop forged from high carbon steel, heat treated, quenched and tempered, and are available in a variety of shapes and crowns. These are special-purpose hand tool...

Recent News


Master Appliance Corp.

Phone: 800-558-9413Fax: 262-633-9745 2420 18th Street
Racine WI 53403

Recent Products

Master Proheat STC Dual Mode Heat Gun Senses & Controls Work Surface Temperatures

by TechShop Staff Writers - 12-29-2014

Master Appliance has introduced its new Proheat STC Dual Mode Heat Gun, Model PH-1610, combining its breakthrough Surface Temperature Control (STC) technology with standard electronic heat gun capabil...

Recent News


Master Magnetics, Inc.

Phone: 800-525-3536 747 South Gilbert Street
Castle Rock CO 80104

Recent Products

Master Magnetics Offers Magnetic Impact/Heat Gun Holder

by TechShop Staff Writers - 01-11-2017

Master Magnetics' extremely strong neodymium magnet holds impact wrenches, heat/paint guns and other heavy tools on any ferrous metal surface. The repositionable, non-scratch, rubber-coated base an...

Master Magnetics’ Retrieving Magnet Is Handy for Tight Spaces

by TechShop Staff Writers - 03-04-2015

Master Magnetics’ Retractable Retrieving Magnet is the ideal tool for extracting metal parts from hard-to-access tight spaces such as cramped engine compartments, behind heavy equipment, down drains...

Recent News


Mastercool Inc.

Phone: 973-252-9119Fax: 973-252-2455 One Aspen Drive
Randolph NJ 07869

Recent Products

Recent News


Matco Tools

Phone: 800-331-2427Fax: 330-926-5332 4403 Allen Road
Stow OH 44224

Recent Products

Matco Tools 5-Piece Exhaust Manifold Stud Remover Set

by TechShop Staff Writers - 05-14-2019

Matco Tools’ 5-Piece Exhaust Manifold Stud Remover Set is designed to securely grasp studs with as little as 1/4-in. exposed. The innovative compact design is 30% shorter than the competition and d...

Matco Tools Adds MaxFlex to Maximus Diagnostic Family

by TechShop Staff Writers - 05-06-2019

Matco Tools introduced the MaxFlex (No. MDMAXFLEX), a full-featured, Android -based diagnostic tablet that was designed for pure flexibility to meet the needs of all technicians and budgets in th...

Matco Tools Maximizes Diagnostics with MDMAX3 Scan Tool

by TechShop Staff Writers - 09-25-2018

Matco Tools Maximus 3.0 Diagnostic Scan Tool, No. MDMAX3, is the fastest and strongest member of the Maximus family. Once you scan a vehicle, you can equip yourself with the information needed ...

Matco Hose Clamp Pliers Adjust to 15 Positions

by TechShop Staff Writers - 05-07-2018

A best seller for Matco Tools is the 7” Hose Clamp Pliers (PHC7). The hose clamp pliers feature a push-button adjustment with 15 adjustment positions. The reliable grip of the pliers in all posi...

Matco Tools Flashlight with Maximum Illumination

by TechShop Staff Writers - 05-01-2018

The Matco Tools Strion Flashlight Dual Switch High Lumen with Piggyback Charger, no. M95278, provides maximum illumination and a wide beam for maximum visibility. It features a push-button tail sw...

Matco Tools 81 Piece Auto Master Tap & Die Set

by TechShop Staff Writers - 05-01-2018

The Matco Tools 81-Piece Auto Master Tap & Die Set (81MATDS) is a comprehensive, lifetime warranty set designed uniquely for technicians and includes automotive-specific sizes not found in tradi...

Solve OBD II Powertrain Issues with Matco Tools' Fix Advisor Pro

by TechShop Staff Writers - 03-28-2018

  The Matco Tools Fix Advisor Pro, No. MD100, is the company’s latest generation of OBD II powertrain issue solvers for all levels of technicians. The device features a 3.5” color d...

Matco Tools Offers Powerful Code Reader

by TechShop Staff Writers - 03-14-2018

  The Matco Tools MD60A CodeAdvisor has all the basic features a technician needs to diagnose check engine lights on 1996 and newer OBD II vehicles. Features like DTC severity, on-scree...

Bolt On Technology Now Integrates with Matco Tools' Maximus Scan Tool

by TechShop Staff Writers - 02-26-2018

Bolt On announced its integration with the Matco Maximus Tablet at the 2018 Matco Tools National Business Conference. The integration includes the new Matco Maximus 2.0A, MAXGO-A and MAXME-A Tabl...

3/8" Drive Flex Head Electronic Torque Wrench from Matco Tools

by TechShop Staff Writers - 02-05-2018

  The Matco Tools 3/8" Drive Flex Head Electronic Torque Wrench (ETWB100FKA) offers a sealed ratchet head for better performance and its flex head design provides added access and control ...

Matco Tools Offers New Color Options in Popular 1/2” Impact Wrench

by TechShop Staff Writers - 11-27-2017

The Matco Tools 1/2” Composite Pneumatic Impact Wrench MT2769 is now available in green (MT2769G) and orange (MT2769O), featuring the same 1,300 ft.-lbs. of breakaway torque and backed up with a...

Matco Tools 12-Piece Hand Impact Driver Set

by TechShop Staff Writers - 11-13-2017

The Matco Tools 12-Piece Hand Impact Set (SID12PB) features a reversible 3/8" square drive impact driver with a heavy-duty hexagon grip, which prevents the impact driver from slipping out of your hand...

Matco 3/8" Drive Metric Extended Anvil Universal Chrome Socket Set Available

by TechShop Staff Writers - 10-11-2017

The Matco Tools 3/8" Drive 12-Piece Metric Extended Anvil Universal Chrome Socket Set (SBLSP122M) features anvil sockets that fit multiple configurations, including 6- and 12-point, torx, torx plu...

Matco Offers 3/8" Locking Flex Ratchet Featuring 88 Ratchet Gear Teeth

by TechShop Staff Writers - 09-12-2017

The Matco Tools 3/8" Drive 15" eighty8 Tooth Locking Flex Ratchet — available in green and orange, No. BFR158LFGA and No. BFR158LFMA — features 88 ratchet gear teeth that produces a swing arc just...

Matco 12V Cordless Infinium Impact Driver Kit Gets You into Tight Spots

by TechShop Staff Writers - 08-08-2017

  The compact 12V Cordless Infinium Impact Driver Kit (MCL1214IDK) from Matco Tools is great for interior work, where size of the tool is important. The unit provides up to 60 ft.-lbs. ...

Matco Power Steering Pulley Set for Domestic Vehicles

by TechShop Staff Writers - 07-19-2017

The Matco Tools Master Power Steering Pulley Set (PSPS477) was designed to remove and install press-on type, belt-driven accessory pulleys found on most major domestic vehicle platforms. For us...

Reset a TPMS in Less than Two Minutes with Matco Tools MAXTPMS and OBD II Module

by TechShop Staff Writers - 06-27-2017

The Matco Tools OBD II Module for MAXTPMS (MDMAXTPMSOBD), pairs with the MDMAXTPMS to enable re-learn procedures through the OBD II port. This unit was designed to bypass many of the manual res...

Protect Your Tools with Matco's Customizable Toolbox Drawer Organization Kits

by TechShop Staff Writers - 05-31-2017

Matco Tools’ exclusive toolbox drawer organization kits are a completely customizable solution that are engineered to maximize efficiencies and profitability for today’s technician. With thousa...

Matco Tools Provides Modular Lighting Solution

by TechShop Staff Writers - 10-25-2016

The MATCO Fast Connecting Light Kit (P/N MFCLK) is a revolutionary modular lighting solution that provides all the lighting a technician needs in one kit, says the company. A patent-pending qui...

Matco Tools to Offer Adenna Disposable Gloves

by TechShop Staff Writers - 08-23-2016

Adenna Inc. announces the recent signing of an agreement with Matco Tools. This agreement covers the distribution of Adenna’s synthetic and latex disposable gloves to automotive professionals an...

Matco maxME Scan Tool With One-Click Updates

by TechShop Staff Writers - 06-15-2015

The maxME bi-directional scan tool from Matco Tools features a patented, pay-as-you-go software subscription service, allowing users to pay for only the car makes they work on. Using the MAX app, use...

Matco Tools Lights Feature New Energy-Saving Technology

by TechShop Staff Writers - 03-09-2015

Matco Tools’ Lighting Program includes SMD (Surface Mounted Diodes) and COB (Chip on Board) technology lighting, greatly enhancing the quality of light. These light configurations greatly reduce ...

Jump Start Your Power with Matco's MTJS12PRO

by TechShop Staff Writers - 02-25-2015

The Matco Tools MTJS12PRO 12V-22AH Jump Starter Pro is a heavy-duty professional jump starter with a fully automatic 4 Ah charger for a fast charge. It features a modern LCD voltmeter display and 2...

Matco Tools Versapower: Power Source and Jump Starter

by TechShop Staff Writers - 12-16-2014

Featuring 300 cranking amps with 400 peak amps of power, the Matco Tools Versapower (MINIJUMP) can be used to jumpstart most domestic and import vehicle make and models, including cars, light truc...

Matco Tools Announces New Cordless Half-inch Impact Wrench

by TechShop Staff Writers - 11-26-2014

Matco Tools recently announced the release of a new 18V cordless Infinium half-inch impact wrench and kit to its growing product line. The MCL1812IWK is one of the latest offerings from Matco, featuri...

Matco Tools Adds JSC450 and JSC480 to Line of Service Carts

by TechShop Staff Writers - 11-17-2014

Matco Tools has added two new model options. The recently developed JSC450 and JSC480 toolboxes offer autoworkers quality, value-priced mobile tool storage that is built at Matco’s plant in Jame...

Matco Offers Techs Safety and Style in Carhartt Glasses

by TechShop Staff Writers - 07-21-2014

Stay safe with Matco Tools’ wide variety of safety glasses, including Carhartt branded glasses ranging in style and functionality. The basic Carhartt Billings Safety Glasses (CH110ST) are a great...

Matco Tools Expands Diagnostic Family With Two New Products

by TechShop Staff Writers - 02-11-2014

As part of Matco Tools’ mission to continue providing the most innovative tools on the market, the company announced at its distributor expo that it will be expanding its growing line of diagnosti...

Matco Tools Introduces Maximus, The Future Of Diagnostic Tablets

by TechShop Staff Writers - 02-28-2013

Matco Tools’ new Maximus provides the automotive industry with a unique solutions-based diagnostics and information tablet. Matco recently added the Maximus diagnostic tablet to its product lineu...

Matco Tools Introduces the MPS700 OBD II & ABD Scan Tool

by TechShop Staff Writers - 06-10-2010

Matco Tools introduces a new OBD II & ABD Scan Tool, the MPS700. This tool features: • New advanced scan tool with Code Connect data — Code Connect provides the top reported fixes for the ...

Recent News

Intercourse Automotive 4x4 Wins $3,000 Worth of New Repair Equipment in Digital Photo Contest

by TechShop Staff Writers - 12-13-2018

BOLT ON TECHNOLOGY, in partnership with Matco Tools, announced that Intercourse Automotive 4x4, located in Intercourse, PA, is the winner of the “What’s a Photo Worth” contest, commemorating...

BOLT ON TECHNOLOGY Launches Photo Contest to Celebrate Milestone

by TechShop Staff Writers - 10-11-2018

BOLT ON TECHNOLOGY, in partnership with Matco Tools, announced the launch of the “What’s a Photo Worth” contest, commemorating the 20 millionth repair photo to be uploaded via BOLT ON’s so...

Matco Tools Celebrates Tools for the Cause

by TechShop Staff Writers - 05-02-2018

Matco Tools proudly supports military and veterans’ families with its Tools for the Cause program where 15 percent of the proceeds from the sale of Tools for the Cause products and merchandise w...

Matco Tools Ranked a Top Franchise in Entrepreneur's 39th Annual Franchise 500

by TechShop Staff Writers - 01-18-2018

Matco Tools recently ranked in Entrepreneur magazine's Franchise 500. Placement in the Franchise 500 is a highly sought-after honor in the franchise industry, as evidenced by the fact that Entrepreneu...

Matco Tools Celebrates Tools for the Cause with Exclusive Products

by TechShop Staff Writers - 10-18-2017

Matco Tools proudly supports breast cancer research with its Tools for the Cause program. Go pink this October in support of breast cancer research. Fifteen percent of the proceeds from the sal...

Time to Go Pink! Matco Tools Celebrates Tools for the Cause

by TechShop Staff Writers - 10-02-2017

Matco Tools proudly supports breast cancer research with its Tools for the Cause program. Go pink this October in support of breast cancer research. Fifteen percent of the proceeds from the sale of 3...

Matco Tools Toolbox Survives Tornado

by TechShop Staff Writers - 06-20-2017

A tornado struck Van Zandt County, TX, April 29, and tragically, four people died from injuries sustained during the storm. Severely hit was the I20 Chrysler Dodge Jeep Ram dealership on Interstate 2...

Matco Tools Continues 'Tools For The Cause' Campaign With Launch Of 'I Drive For' Breast Cancer Awareness Program

by TechShop Staff Writers - 08-26-2014

Don Schumacher Racing’s Matco Tools Top Fuel Dragster team and Antron Brown will once again race to raise awareness and funds for a cause that affects everyone — breast cancer. To-date, Matco T...


Mattei Compressors, Inc.

Phone: 410-521-7020 9635 Liberty Road, Suite E
Randallstown MD 21133

Recent Products

Recent News


Maxxeon, Inc.

Phone: 877-621-0005Fax: 519-620-2011
Contact: John Schira Maxxeon Inc. c/o Herold Mfg.[email protected]
15901 Industrial Parkway
Cleveland OHIO 44135

Recent Products

Recent News


Mayhew Tools

Phone: 800-872-0037Fax: 413-863-8464
Contact: Debra Selicious
199 Industrial Boulevard
Turners Falls MA 01376

Recent Products

Mayhew Introduces New 9-Piece Pneumatic Replaceable Tip Hammer Set

by TechShop Staff Writers - 11-13-2019

Mayhew Steel Products, Inc. (Mayhew) introduces a new 9-piece pneumatic Replaceable Tip Hammer Set, part number 32026. This set includes three replaceable tip hammer lengths, including 4 1/4-in.,...

Mayhew Introduces Magnetic Pick-up Tools to CatsPaw Product Line

by TechShop Staff Writers - 02-15-2019

Mayhew Steel Products, Inc. has added nine new Magnetic Pick-up Tools to their CatsPaw product line, as well as two pre-packaged display sets for the 1-1/2 lb. and 2-1/2 lb. capacity tools with 30...

Mayhew Expands Dominator Product Line with Addition of 2 Curved Pry Bars

by TechShop Staff Writers - 01-29-2019

Mayhew Steel Products, Inc. introduces new 48 in. and 58 in. Dominator Curved Pry Bars available with orange or green handles. The heavy-duty pry bars are ideal for any lifting or prying applicati...

Mayhew Introduces Dominator Pry Bar Storage Racks

by TechShop Staff Writers - 12-21-2018

Mayhew Steel Products, Inc. introduced two new Dominator Pry Bar Storage Racks. Both racks can hold up to 12 pry bars (not included) and are made from durable 1Ž4 in. thick ABS material that is i...

Mayhew Tools Introduces New ProPneumatic Tool Set Designed for Long Reach Applications

by TechShop Staff Writers - 12-07-2018

Mayhew Steel Products, Inc. introduced the new ProPneumatic 4 PC Long Mix Set, No. 37329. This set designed specifically for long reach applications, includes a pneumatic 3/8 in. nut splitter, 1-1...

Mayhew Expands CatsPaw Product Line with 5 New Mirror Inspection Tools

by TechShop Staff Writers - 11-23-2018

Mayhew Steel Products, Inc. expanded their CatsPaw product line with the addition of five new mirror inspection tools. The mirrored heads, ranging from 1-1/4 in. to 3-1/4 in. diameter, allow opera...

Mayhew Tools Introduces New Dominator 3-Piece Heavy-Duty Pry Bar Set

by TechShop Staff Writers - 11-08-2018

Mayhew Steel Products, Inc. introduces the new Dominator Three-Piece Long and Heavy-Duty Pry Bar Set and Rack (14068). The Dominator curved pry bar set includes a 48-in. and 58-in. long and a 44-i...

Mayhew Tools Set Ideal for Driving, Loosening, Removing Without Damage

by TechShop Staff Writers - 10-01-2018

Mayhew Steel Products, Inc. announced the new ProPneumatic Four Piece Flange Nut/Bolt Driver Set (32080) of counter-bored drivers that was specifically designed to drive flange-head nuts to either...

Mayhew Tools Announces New ProPneumatic Heavy-Duty Tool Set

by TechShop Staff Writers - 09-22-2018

Mayhew Steel Products, Inc. announced the new ProPneumatic Four-Piece Heavy-Duty Tool Set (37326). This versatile, heavy-duty pneumatic tool set is uniquely designed for an array of niche autom...

Mayhew Tools Introduces New ProPneumatic 2-Piece Hinge Pin Driver Set

by TechShop Staff Writers - 09-14-2018

Mayhew Steel Products, Inc. announced the new ProPneumatic Two-Piece Hinge Pin Driver Set (32038). The set includes both a 6 mm and 8 mm hinge pin used to remove door hinge roll pins­ that works ...

Mayhew Tools Valve Guide Remover Ideal for Removing Old Valve Stems

by TechShop Staff Writers - 09-10-2018

Mayhew Steel Products, Inc. announced the new ProPneumatic 8 mm Valve Guide Remover (32037). The Valve Guide Remover is designed specifically for removing old style valve stems (not for use on tir...

Mayhew Tools Announces New ProPneumatic Exhaust Pipe, Muffler Set

by TechShop Staff Writers - 08-31-2018

Mayhew Steel Products, Inc. announced the new ProPneumatic Five Piece Exhaust Pipe and Muffler Set (32028). The pneumatic toolset features all of the necessary pipe cutters and tools to remove and cut...

Mayhew Tools Designs 2 New ProPneumatic Hammer Sets

by TechShop Staff Writers - 08-25-2018

Mayhew Steel Products, Inc. introduced two new ProPneumatic Hammer Sets, one standard and one specialty. All of the hammers within the sets are made of shock-resistant alloy steel that is fully harden...

Mayhew Tools Introduces Rechargeable 13-in-1 LED Multi-Tool

by TechShop Staff Writers - 08-20-2018

Mayhew Steel Products introduced a new, rechargeable LED Multi-Tool (17945) to the market. The detachable 13-in-1 product features key toolsets to accommodate a wide range of everyday applications...

Mayhew Trim Tools Set Designed for Easy Access in Tight Spaces

by TechShop Staff Writers - 08-16-2018

Mayhew Steel Products announced the new 6 Piece ProGrip Trim Tool Set, consisting of three U notch trim tools and three V notch trim tools. The complete set is designed to give users easy access i...

Mayhew Releases Ergonomic 4-Piece Straight Scraper Set

by TechShop Staff Writers - 07-22-2018

Mayhew Steel Products announced a Four Piece Dominator Straight Scraper Set ideal for a multitude of applications such as, removing gaskets, rust, paint, carbon buildup and floor tile. Each of ...

Mayhew Tools' Four Piece ProGrip Hook and Pick Set Proves Ideal for Niche Automotive Aftermarket Applications

by TechShop Staff Writers - 03-07-2018

Mayhew Steel Products, Inc. (Mayhew Tools) 4-Piece ProGrip Hook & Pick Set (13094) proves niche tool set for automotive aftermarket applications, including removing seals, O-rings, cotter pins, ...

Mayhew Tools' Offers 30 Unique Hooks and Picks and 11 Convenient Sets

by TechShop Staff Writers - 02-08-2018

Mayhew Steel Products (Mayhew Tools)'s line of ProGrip Hooks and Picks, which features Mayhew’s signature ProGrip handle, includes over 30 unique hooks and picks and 11 convenient sets, from min...

New Brass Punch & Chisel Sets from Mayhew Tools

by TechShop Staff Writers - 03-29-2017

Mayhew Tools offers Master Brass sets that are excellent for non-sparking, non-magnetic and non-marring applications, says the company. The sets contain popular sizes of drift, solid, line-up a...

Mayhew Tools Offers Pneumatic Tools Set

by TechShop Staff Writers - 10-24-2016

Mayhew Tools offers its nine-piece Pneumatic Tools set (7322). These pneumatic punches, chisels and hammers are used with a pneumatic tool. Many options are available including standard and ...

Zinc-Plated Alignment Pry Bars from Mayhew Tools

by TechShop Staff Writers - 09-01-2016

Mayhew’s new zinc-plated rolling head and alignment pry bars feature two work ends that are preferred during vehicle assembly, disassembly and adjustment operations. Ideal for prying, positio...

Mayhew Unveils New Line Of Plated Pry Bars

by TechShop Staff Writers - 12-02-2015

        Mayhew Steel Products, Inc. unveiled a new line of professional-grade, USA-made, plated pry bars as well as ratcheting hose clamp pliers at SEMA 2015. Ma...

Mayhew Offers Universal Inner Tie Rod Tool

by TechShop Staff Writers - 06-15-2015

The SPEEDY Universal Inner Tie Rod Tool, No. 29910, from Mayhew Tools is a universal tool designed to remove and mount inner tie rods on vehicles. The patented roller and cam mechanism adapts autom...

Recent News

Mayhew to Host Steve Darnell of WelderUp and 'Vegas Rat Rods' at SEMA 2019

by TechShop Staff Writers - 10-17-2019

Mayhew Steel Products, Inc. (Mayhew Tools) has announced that Steve Darnell, the Discovery Channel’s “Vegas Rat Rods” personality and owner of the renowned WelderUp shop, will be a guest in th...

Meet Doug Coby at Mayhew’s SEMA Booth

by TechShop Staff Writers - 10-25-2017

Mayhew encourages SEMA Show attendees to visit its booth Oct. 3–Nov. 3. The company will have new products to browse and try out. You can find Mayhew in the North Hall of the Las Vegas Convention Ce...

Mayhew Tools Recognized as ISO 9001:2015 Certified Company

by TechShop Staff Writers - 08-31-2017

Mayhew Steel Products (Mayhew Tools) announces its recent ISO 9001:2015 certification. ISO 9001 evaluates whether a company’s Quality Management System in place is appropriate and effective, while a...

Mayhew Tools to be Primary Sponsor for Whelen Modified Tour Car in 2017

by TechShop Staff Writers - 12-15-2016

Mayhew Steel Products has announced the company is teaming up with Mike Smergilio from MSIII Racing and four-time NASCAR Whelen Modified Tour Champion Doug Coby as primary sponsor of the #2 car fo...


McCourt Marketing Group

Phone: 866-956-4664Fax: 330-666-3432
Contact: Jeremy Yoder
1314 Centerview Circle
Akron OH 44321

Recent Products

Recent News

BASE USA Reintroducing Accu-Turn to US Market

by TechShop Staff Writers - 10-09-2019

BASE USA is setting up shop in the U.S. market with its Beissbarth, Sicam and Werther brands, marketing them all under the familiar Accu•turn name. The BASE USA group is the result of a project...


Connect with us