Introducing the New Ringers Brand Crew Shoe

Introducing the New Ringers Brand Crew Shoe

It only took us 24 months, countless samples and 10,001 thoughts, opinions and input from our staff, clients and customers to produce the ultimate in crew and shop shoes. Ringers Gloves proudly introduces the all-new Ringers Brand Crew/Shop Shoe ....

It only took us 24 months, countless samples and 10,001 thoughts, opinions and input from our staff, clients and customers to produce the ultimate in crew and shop shoes. Ringers Gloves proudly introduces the all-new Ringers Brand Crew/Shop Shoe.

The 100% leather in the upper construction area of the shoe provides not only increased durability, but also let’s your feet breathe, reducing the risk of fatigue throughout the day.

A composite mid-sole helps maintain a consistent arch throughout the life of the shoe. Whether you’re going over the wall on a pit stop, wiping tires up at the starting line or just working around your house or shop, the slip-resistant bottom sole helps keep your feet firmly planted to the ground to help get your task done faster.

The crew/shop shoe is available in black only, sizes 8-15 and retails for $69.99.

The shoe was definitely worth the wait, so why wait any longer? Get your pair today by calling (800) 421-8454 to find a dealer/distributor near you or we’re always open at www.ringersgloves.com.

Ringers Gloves, the Official Gloves of NHRA and title sponsor for the Ringers Gloves Pro Bike Battle, is a full-line manufacturer of high-end, task specific gloves, SFI 3.3/1, 3.3/10, 3.3/20 racing gloves, UnderX protective undergarments, UnderX Performance gear, crew shoes, as well as a full line of accessories for every need. Isn’t it time you bring in the Ringers? Check us out at www.ringersgloves.com.

You May Also Like

Pulling Codes: Multiple Misfire Personalities

A vehicle fails an emission test due to a series of codes, with misfire activity found on cylinders 2, 4, 6, 8 and 3 – and a strange metallic sound can be heard when the rpms are raised. See how Carlton Banks solves this latest Pulling Codes case.

A Story of Codes P0302, 04, 06, 08 & 03
 

This month’s diagnostic journey begins with a 2008 Land Rover Discovery that is taken in to a local testing facility for an emission test and fails due to a series of misfire codes.

Misfire activity is found on cylinders 2, 4, 6, 8 and 3; at first glance this series of codes implies that there may be bank 2 issues, but the cylinder 3 code throws a wrench into that mode of thought.

Using Volumetric Efficiency to Determine the Health of an Engine

Using an OBD II scan tool/dynamometer simulation/calculation program that can graph volumetric efficiency (VE) over rpms, contributor Glen Beanard devised a test sequence using real-world vehicles. This article takes you step by step through his diagnostic process.

Intermittent Engine Misfire Analysis

Even for an experienced diagnostic technician, attempting to diagnose an intermittent misfire condition that occurs only under specific driving conditions can be a frustrating exercise. Contributor Gary Goms breaks it down, and includes tips for using a scan tool and a lab scope.

5 Mistakes Newbie Tire Techs Make

Nothing can turn a new tech into a veteran but time and experience, and often that experience is going to come from making mistakes – sometimes real bad ones – and learning from them (you hope). By addressing these most common mistakes right away with new tire techs, the worst of them can be avoided.

Rivet Bonding Comes Full Blast

Now that rivet bonding is in the mainstream with the Ford F-150, it’s time for shops to look into training and equipment for this repair process.

Other Posts

‘Test Before Touch’ – It’s No Waste of Time

To help reduce the headaches involved in servicing TPMS, it’s important to use the “Test Before Touch” procedures in your shop. Used properly, TBT can form a strong foundation for everything else you do regarding TPMS, reduce complexity and help you educate and keep your customers.

The Right Diagnostic Tools Save You From Extensive Disassembly Time

It can sometimes be difficult to make the correct diagnosis for a hard-to-start complaint. And diagnostic time may be extensive — and expensive. This article shows how certain tools have the ability to automatically analyze waveforms for you.

Know the Specs for Your Social Media Accounts

If you’re doing social media, are you doing it effectively? Are your accounts set up correctly? Are you posting often enough? Mark Claypool answers some questions.

Top 5 Tools: Kenny Younkins, Ken’s Auto Service Center

Kenny Younkins, owner Related Articles – Lisle 61860 Oil Filter Housing Torque Adapter – Mueller Kueps Presents Redesigned Sensor Tap Series – Lisle Low Profile Fuel Line Disconnect Ken’s Auto Service Center Akron, OH While Ken first said his favorite tool is his fishing rod, he said in the shop he prefers these five: