Light-N-Carry Powerlight Rescue Includes All-In-1 Jump Starter, Light and Power Supply

Light-N-Carry Powerlight Rescue Includes All-In-1 Jump Starter, Light and Power Supply

Rated to deliver 400 amps of 12 volt jump starting power, the Powerlight Rescue is capable of starting gasoline engines up to V6 size.

When it comes to all-in-one units, often their biggest drawback is that they do not perform any one function well, leaving the operator to wonder why they needed it in the first place. Clore Automotive’s new Powerlight Rescue (No. LNC7480) by Light-N-Carry features a 12V jump starter, work light and power supply that breaks convention. It is a multifunction unit that provides exceptional service in all working modes.

Rated to deliver 400 amps of 12 volt jump starting power, the Powerlight Rescue is capable of starting gasoline engines up to V6 size. Its powerful 12000mAh lithium battery delivers the speedy burst of power needed to start uncooperative vehicles, plus it boasts numerous safety features to make jump starting safer for the operator and the vehicle being started. Safety features include reverse polarity protection, feedback protection, over-voltage protection and shorted cell detection.

The Powerlight Rescue features several lighting modes. The primary lighting mode is the work light mode, which is rated at 480 lumen. This is complemented by a red flare light mode with a flashing safety strobe option, which is particularly useful in roadside situations or any situation where a warning light is needed. The unit also features a focus beam mode when pinpoint lighting is needed. Because of its large battery capacity, the unit can run for up to eight hours in work light mode.

The Powerlight Rescue also can function as a power supply. Similar to its other working modes, the power supply mode has several aspects to it. It functions as a USB power bank with two USB outlets, enabling it to charge a wide variety of small electronic devices. It also functions as a 12V 10A power supply, enabling it to be used to power 12V accessories or be used as a vehicle memory saver when a battery is replaced.

The unit also features IP54 ingress protection from dust/water, a magnetic base for easy mounting, a hang hook for convenient positioning, battery status display and weighs less than two pounds. It includes a wall charger that provides fast, easy and automatic recharging of the internal battery.

Link: Clore Automotive

Clore Automotive
Phone: 800-328-2921Fax: 913-310-1075Contact: Jim O\'Hara

You May Also Like

Gray Tools Introduces Made-in-USA Insulated Socket Sets

Two new insulated socket sets are available in 1/4″ and 3/8″ drive sizes.

Gray Tools offers two new insulated socket sets, available in 1/4" and 3/8" drive sizes. Made in the USA, each set contains a 42-tooth round head ratchet with two extensions and a variety of SAE and metric sockets. Each piece is individually insulated to 1,000 volts and tested to 10,000 volts in compliance with ASTM F1505 standards.

K-Tool International Offers Backlit Tire Inflator Gauge

The backlit tire inflator gauge is ideal for all types of tire repair shop conditions.

ProMAXX Debuts Air-Hammer-Powered Fuel Injector Puller Kits

The Base Kit and ProKit Plus versions include a unique air-hammer-powered punch rod to pop injectors free.

Innova to Launch Pro Diagnostic Tablets and App

The smart tablet tools and app can help maximize the diagnostic process and save technicians time, Innova said.

Ingersoll Rand D5241 IQV20 Hammer Drill   

Three modes, 24 clutch positions provide versatility, precision, durability with cordless freedom.

Other Posts

Utilizing Fully Automatic A/C Equipment on Today’s Cars

As technology evolves, fully automatic A/C equipment becomes a greater necessity.

A/C knob
Brake Lathe Basics

Resurfacing drums and rotors is a machining process with its own specific guidelines.

Clore PRO-LOGIX PL3740 (VIDEO)

The PRO-LOGIX PL3740 by Clore Automotive features several different functions.

Killer Tools & Equipment Corp. Introduces New Hole Punch Kit

The new 14 piece Bumper Perfect Kit punches holes for an OEM look.