New Work Gloves Made With 3M Gripping Material Take Hold In Most Situations

New Work Gloves Made With 3M Gripping Material Take Hold In Most Situations

3M recently announced the introduction of Work Gloves made with 3M Gripping Material that deliver greater productivity and performance with less effort. Work Gloves made with 3M Gripping Material can provide up to a 270 percent improvement in friction when used as a two-part system and are ideal for anyone who needs a better grip especially in wet or oily conditions, said the company.

3M recently announced the introduction of Work Gloves made with 3M Gripping Material that deliver greater productivity and performance with less effort. Work Gloves made with 3M Gripping Material can provide up to a 270 percent improvement in friction when used as a two-part system and are ideal for anyone who needs a better grip especially in wet or oily conditions.
 
Comprised of thousands of micro fingers, the 3M Gripping Material, which is incorporated into the work gloves, enhances traction and hold on many tools and pieces of equipment. This means, reduced slippage, fewer dropped tools and improved productivity with less fatigue. The Work Gloves can be used alone, or as a two-part system, which mates the gloves with tools or piece of equipment wrapped with 3M Gripping Material tape. The two-part system significantly improves friction over traditional leather gloves and wraps. In addition, the Work Gloves are resistant to abrasion and punctures so they stand up to the demands of the factory and in the field.
 
“Not being able to properly grip tools because of wet or oily conditions can be frustrating,” said Tanya Richert, global marketing development manager, 3M Industrial Adhesives and Tapes Division. “Whether you are handling a jackhammer, hand-tightening an oil filter in your garage, shifting levers in a plant or cutting tree limbs in your backyard, grip performance is always a concern. Work Gloves made with 3M Gripping Material bring science and better grip performance to any job by allowing the users the ability to grip lighter, not tighter.”
 
In a 3M-sponsored study, researchers at the University of Wisconsin found that using 3M Gripping Material under dry conditions reduced required grip force by an average of 24 percent. Using 3M Gripping Material for twisting tasks, oil-saturated surfaces reduced the average grip force needed by 56 percent.
 
3M Gripping Material is available for a wide-range of applications. In addition to work gloves and tape, golf gloves and batting gloves are also available for situations where a strong grip offers a performance advantage.
 
To purchase Work Gloves made with 3M Gripping Material, visit www.Shop3M.com/gripping. For more information about 3M Gripping Material, visit www.3M.com/gripping or like us on Facebook at www.facebook.com/gripping.material.
 

You May Also Like

BendPak Full-Rise Scissor Lift Delivers Two-Post Performance

SP-7XE scissor lift lays flat and raises a vehicle six feet with an open center below.

The new BendPak SP-7XE Series of full-rise scissor lifts provides the performance and undercarriage access of traditional two-post lifts in a more compact, space-saving package. Floor- and flush-mount (SP-7XEF) models of this frame-engaging lift are available. 

With a rated capacity of 7,000 pounds, SP-7XE Series lifts are designed for full-service auto shops, quick-lube pits, and any other service area with little room to spare. They can raise most passenger vehicles and light trucks nearly six feet, so techs can easily access all critical undercarriage areas without having to stoop or crawl across the floor. They fold flat when not in use. 

CTA Tools Debuts Chrysler Cam Phaser Master Set – VVT & VVL

Applications included are for 2011-2022 Chrysler, Dodge & Jeep models.

Mayhew Introduces New 14-Piece Micro Hand Tool Set

This new set is a compilation of all the current micro line products from Mayhew; including pry bars, picks, hooks and screwdrivers.

Victor Reinz Reinzosil Sealant Added to Spicer CV Service Kits

Victor Reinz Reinzosil vulcanizing silicone boosts resistance to various fluids, making it sensor-safe for a wide range of applications.

Gray Tools Introduces Insulated Hex Bit Socket Set

The insulated tool sets are backed by a limited lifetime warranty.

Other Posts

Snap-on Debuts New General Service Set 

The company says technicians now have maximized tool concentration in the smallest footprint.

Chevron Introduces New Rykon Formula to Grease Product Line

The new calcium sulfonate complex-based grease is designed for heavy-duty and extreme pressure applications.

New Small Stud Extractor Now Available from Mayhew Tools

This new stud extractor, 1/4″ drive, allows for stud and bolt removal from tighter spaces with a wide option of driver abilities for job versatility.

6250 1⁄4” Mini Rt. Angle Die Grinder

The low weight ultra-compact design provides added control and maneuverability.