Permanent Magnet Starters: ‘Starting’ the Electrical Diagnosis
When we diagnose problems with the modern, permanent magnet, reduction-gear import starter, we begin by looking at a system composed of the battery, starter and connecting wiring. The automotive battery, for example, is designed as a fast-discharge battery capable of sustaining enough amperage output to crank the engine until the fuel injection and ignition cycles
OBD II Diagnostics:Tips And Tricks to Make the Process Easier
The Malfunction Indicator Lamp (MIL) can be a golden light of opportunity for your shop. If the light comes on, it means the Onboard Diagnostics II system (OBD II) has detected an emissions-related problem. OBD II is designed to turn on the MIL if a problem occurs that may cause emissions to exceed federal limits
Muscling in on Restoration & Performance Work: Part 1
As automotive technology continues to become more complex with each new model year, you may be longing for the “good ol’ days” when engines had carburetors and distributors but no sensors, fuel injectors or computers. Most driveability problems were fairly simple to diagnose and only required a trained ear and a few basic tools. Alas,
Matching Your Techs with the Right Job
Just a single decade ago, many industry experts speculated that 80% of the workflow passing through an independent repair shop would involve some type of high-level diagnostic process. Today, it’s obvious that, with the infusion of electronic operating systems, high-level diagnostics is now approaching that level of total workflow. Nevertheless, many others continue to ridicule
A/C Update
Once a year the Mobile Air Conditioning Society (MACS) hosts a trade show for A/C shop owners and technicians. This year’s event was held in Orlando, FL, January 22-24, and provided a wealth of service information to those who attended the technical sessions. For those who could not be there, we pass along some of
Understanding Today’s Multi-Coil Ignition Systems
Distributorless Ignition Systems (DIS) have been around for more than two decades, but in recent years the trend has been to multi-coil systems such as Coil On Plug (COP) or Coil Per Cylinder (CPC) ignition systems, and Coil Near Plug (CNP) ignition systems. COP systems have become the hot setup for a number of packaging,