OBD II Diagnostics:Tips And Tricks to Make the Process Easier
The Malfunction Indicator Lamp (MIL) can be a golden light of opportunity for your shop. If the light comes on, it means the Onboard Diagnostics II system (OBD II) has detected an emissions-related problem. OBD II is designed to turn on the MIL if a problem occurs that may cause emissions to exceed federal limits
Head Gasket Replacement
During some point in their service lives, most import engines built with cast-iron cylinder blocks and aluminum cylinder heads will need a cylinder head gasket replacement. The vulnerability of aluminum-head engines to head gasket failure is caused by the aluminum cylinder head expanding approximately 1.5 times more than the cast-iron block. Although measured in thousandths
Matching Your Techs with the Right Job
Just a single decade ago, many industry experts speculated that 80% of the workflow passing through an independent repair shop would involve some type of high-level diagnostic process. Today, it’s obvious that, with the infusion of electronic operating systems, high-level diagnostics is now approaching that level of total workflow. Nevertheless, many others continue to ridicule
Spark Plug Technology
Spark plugs have been around almost as long as the internal combustion engine. In 1902, spark plugs were first used with a high voltage magneto to provide reliable ignition. For the next 70 years, spark plugs were a high maintenance item thanks to tetraethyl lead, which was used as an octane-boosting additive in gasoline. Unfortunately,
Understanding Today’s Multi-Coil Ignition Systems
Distributorless Ignition Systems (DIS) have been around for more than two decades, but in recent years the trend has been to multi-coil systems such as Coil On Plug (COP) or Coil Per Cylinder (CPC) ignition systems, and Coil Near Plug (CNP) ignition systems. COP systems have become the hot setup for a number of packaging,
Secondary Ignition System Maintenance
As one might expect, the introduction of low-maintenance ignition systems has changed how we sell and service secondary ignition system parts for import vehicles. Most import nameplates have, for example, replaced conventional distributor ignition systems with distributorless or coil-on-plug (COP) ignitions in order to reduce the number of wearing parts in the secondary or high-voltage
Volkswagen Underhood Maintenance & Service Tips
Volkswagens have always been maintenance friendly. From the very first models, ease of repair and durability have been built into the design. VW has managed to keep basic maintenance procedures relatively uncomplicated throughout the years. In this article, I’ll cover some of the more common underhood procedures on common VW models and include some tips